Dual Spray Indoor Cold Spark Machine Wedding Spark Machine Unprecedented Visual

Product Specification

Dual Spray Spin Cold Sparkle Machine For Unprecedented Visual Effects.

1.1 features:

The machine’s built-in protection procedures will stop automated.

Once do fountain over 30s each time. If need it to work again, please operate the second channel again. The continuous shooting time is too long, the internal temperature will rise sharply and cause permanent damage. Suggest not do continuous shooting over 1 minute;

Max connection is 6 pieces via power connecting cables, too many devices work together will cause damage or fire;

After use, the machines, do not immediately turn off the power. The heat-dissipating fan should take out the internal air when the power is on.

Otherwise, the internal heat is quickly transmitted to the surface of the housing;

Please place the equipment in an open place and keep a safe distance of more than 5 meters from the personnel;

Make sure the device is off before filling the consumables;

If the consumables are accidentally ignited, please use the sand to extinguish, do not use water;

If there is no spark out with enough consumables or other abnormal situations, pls stop running the machine and contact the MOKA after-sale service for help.

1.2 Parameter

1.3 Company Introduction

Shenzhen Qunan Electronic Technology Co., LTD. Establish in 2011, an integrating development&production high-tech company. Our company specilize in manufacture and sales different kinds photo booth, cold spark machine bwith unique design and patent.Our photo booth business is meant to have the customers in mind. Qunan is one of the longest running photo booth manufacturer for over 10 years.
We have ce RoHS FCC certs and our main markets EU, American, Australia. We can offer customize service for customers, look at our shop for awesome custom enclosures. If you don't see what you need give us a call or email to us.
Qunan is committed to solving the current and future challenges of the world, keep helping our customers internal and external.We hope to cooperate with you and bring benefits and a brighter future together.

1.4 Machine to disassemble and debug

1.Do not attempt to open the machine or disassemble and debug any parts of the machine when the machine is powered on.

2.Keep the machine dry, please do not use it on rainy or snowy days.

3.The cover on the top of the device must be covered to prevent accidental popping up

4.Powder should be stored in a dry and sealed environment to prevent moisture

5.Before the show and after the show, you should observe whether there are nodes in the spark output.lf there is, it needs to be cleaned up. The  nodes will affect the firework effect and even damage the spark machine.

6.A single power cord for electronic fireworks (machine to the power cord) only allows a maximum of 5 units to be connected in series.

7.Maximum run time is 5minutes.It can be reused, but the machine should not be overheated.

8.lt is forbidden to move and carry machines during use.

9.Make sure that the machine is off when the powder is put in. Please cover the lid after putting in the powder to prevent the garbage from falling  into the powder, causing the machine to block. 

10.Install the devicein a good ventilation place,at least 50cm from any surface. Ensure that the ven-tilation slot is not blocked.

 
11.lf you want to control the device through remote control, unplug the DMX cable and set the remote controlto ONfvou want to pass the menu control device. set the remote control to OFF

1.5 Why Have spin cold spark machine in all your Events?

Of course, this is the equipment you should always have in all your events. It will not only entertain your guests but will also create lively concerts and shows.

Perfect Match for your Events

The spin cold sparkle machine is a complete device consisting of display, parameter label, DMX port, power port, power switch, fuse, spray hole, and powder hole features. spin cold spark machine has both DMX 512 control with two or four channels and built-in IR control modes. These will help you to operate your device either manually or by power.

Creates Flawless Ambiance

Spin cold spark machine can eject the fireworks to a height ranging between 1-5m. The room will be eventually be lit with fireworks and LED lighting. Spark machines have two holes that can rotate at 20 degrees to release the fountain at 360 degrees. They are fused to operate at 110 volts and 220 volts and a direct current of 16A and 10 A respectively. So, when in operation, the fireworks can last into the atmosphere for up to 15 minutes.

Suitable for all Events

Spin cold spark machine features show that it is suitable for all types of events. spin cold spark machine has large volumes of titanium powder that can serve you during the entire event operations. Cold sparklers machines have a size of 365 by 365 by 400mm thus can fit in a small space as possible. On the other hand, spin cold sparks machines have a net weight of 20 kilograms and are capable of consuming 1300W of power. Spin cold machines will never disappoint you. and see your dreams come true.