Fully Automatic Glove Packing Machine For 100 PCs Box Carton 50Hz 60Hz Frequency

Fully Automatic Glove Packing Machine For 100 PCs Box Carton 50/60Hz Frequency

Product Description:

Multi-function cartoning packing machine is a new product developed by Sayok with the advantages of small volume, light weight, wide application range, high production efficiency, multi-use of one machine. At the same time, the machine can be used online with a variety of packaging machines, to achieve the best effect, and can meet the requirements of the national drug production quality management specification —— "GMP".

The glove cartoning machine utility loader is able to fit sorted gloves into specification-specific cartons and seal them out. And applicable to the packaging of various drugs, food packaging, packaging of cosmetics and related industries of small utensils, widely use range, according to the different requirements of the user, can regularly replace products, and mold production cycle is short, easy assembly and debugging, that is, suitable for large batch production of single varieties, and can meet the user of small batch production.

Features:

• Product Name: Glove Packing Machine
• Air Consumption: 7.5 KW Air Compressor
• Type: Horizontal cartoning machine for 100 pcs PVC/Nitrile Gloves
• Power: 220V/50Hz 1.5 KW
• Control System: PLC + HMI
• Box requirement: 250g/m2-400g/m2 imported whiteboard with pre-folding
• Special Feature: Glove Cartoning Machine, Glove Box Filling Machine, Glove Box Packing Machine

Technical Parameters:

Work Flows:

The machine adopts a series of complex transmission, imitating the human action to automatically complete the lower box, box opening, folding instructions, loading (instructions) and box sealing and other procedures. The machine is as follows.

The vacuum used in this machine is either by a vacuum pump or by a ZL112 vacuum generator (SMC).

The material is delivered to the packing slot by the front pillow packing machine, the upper pressure cylinder shoots the excess gas of the product, and the feedback signal is transmitted to the host control center-programmable controller (PLC). At this point, the PLC will control the vacuum solenoid to generate vacuum at a specific time, using the suction box mechanism to suck out the box manually placed in the carton library, sent to the paper chain and open the box, and then driven by the box chain to the push station waiting for the medicine.

When the carton is correctly sucked out of the tray and falls on the chain, the lower sensor S1 has no signal output. When the carton fails (if stuck), the cartridge bar turns up and the PLC sends a control signal to stop the host machine and wait for the restart after troubleshooting. When the carton is correctly sucked down and placed into the walking box chain, the sensor S3 on the middle panel can detect the box signal, the PLC will control the lateral pushing mechanism to launch the gloves from the garage for a specific time, and when the carton is free, the PLC will stop the host.

When the glove accurately reaches the box station, the glove is vertically pushed into the box together, and if the overload device on the push bar will function, the sensor S6 will signal and the PLC will stop the host.

As the glove is accurately pushed into the box, the carton will continue to move forward, driven by the walking box chain. After the spray device, the automatic spray machine sprays the glue to the fixed position and enters the box station. The outgoing conveyor presses the box position again to ensure that all the boxes are sealed.

Support and Services:

Packing and Shipping:

The Glove Packing Machine is packaged in an exported wooden case to protect its components during the shipping process. All components of the machine are wrapped with stretch film and placed into the box.