600 L Bright Polished Beer Fermentation Tanks , Large Conical Fermenter

Product Specification

• Design pressure 3 bar, working 2 bar
• 3 stainless steel legs with leveling footpads, the leg is adjustable
• Interior shell: 304 stainless steel, thickness 2mm (11 gauge)
• Exterior shell: 304 stainless steel, thickness 3mm (14 gauge)
• Interior and exterior finish bright polish to 0.6μm (250 grit), hygiene surface
• 60 /70 degree cone bottom, with 25% head space
• Racking port and discharge port with butterfly valve and fittings
• Side manway door, shadowless
• Dual zone dimple cooling jacket with glycol inlet and outlet
• Polyurethane insulation thickness 80-100mm for cooling jacket on side and bottom
• Fully welded exterior shell
• CIP arm and spray ball
• Rotating tank racking arm
• Bunging valve
• Shock proof Pressure gauge
• Thermometer
• Cooling system
• Perlick style Sample valve
• Tank complete with fittings, valves and all parts.
• Available in size 600Lfermentation ,these tanks are ready for shipment.

1)With our equipment you can make different kinds beers such as ale ,lager ,IPA,stout beer and so on,we supply brewing recipes.

2)We have different capacity from 300L to 10000L per batch,our brewery equipment approved pessure CE, ISO,ROHS,TUV certificate.

3)Have good feedback from our clients

4)Installation /Operation/Service/Maintenance Manual:in English

5)Automatic /semi-automatic operation system ,need one brewer to operate

Accessorys

1)Manway in top or side that we can design in accordance with your request

2)Sample valve

3)Pressure relief and vaccum valve

4)Temp .sensor/thermometer

5)Rotating racking arm with butterfly valve

6)Bottom outlet with butterfly valve

7)spraying Ball with down tube

8)Stainless pipe legs with adjustable footpads

9)safety valve

Fermentatrion tank complete with piping ,fitting ,sanitary,and all parts.

Carbonation port is available for special request .

If you would like to change ,add ,remove or modify any parts of tanks, we can accommodate that.

Specific fitting sizes,changes and locations will be set during the design process .lf you do are not content with our some psrts of tank , we also can provide some specific brand you point to install in the equipment .We can assure you that every detail part of our product will reach your satisfaction .And we awlays receive good remark from our cutoms abroard.

​

List of Items

• 1.Dished head .
• 2.Reference outer size 1060/1060/2130cm
• 3.Total capacity 740L ;Effective capacity 500L
• 4.Design pressure 0.2mpa;working pressure 0.15mpa
• 5.Single stage cooloing jacket ,stainless steel solenoid valve ,KIESELMANN mechanical pressure regulating valve
• 6.Dimple cooling jacket 1.5mm
• 7.conial base 60
• 8.Beer racking arm on cone section, bottom drain port,associated valves and fittings
• 9.Beer outlet and drain port
• 10. Top hops and drain port
• 11.Pressure gauge,respiration valve,samole valve
• 12.Top mamhole
• 13.PT100 temperature probe
• 14.4 stainless steel legs,with screw assembly to adjust leg height,the base plate with two fixed hole .
• 15.The necessary fittings and valves.

Our Service

Before-Sales
1. Layout Design for new build brewery
Our experienced engineer( more than ten years) will provide the detailed layout according to your brewery, if needed, we will fly to your brewery at our cost.
2. Exist Brewery Expansion
Expansion of the brew house, beer tanks, or other parts, we will design and manufacture as per your exist brewery.
3. Effective business communication
Our sales team are young and rich of experience, we are full of passion, all of us have been in this business line for more than 8 years, and they are graduated from UK, Russia etc.
4. Brewing consultant
We also bult a good relation with Shandong university and other institutes who are expert in beer brewing, we are capable to provide the most advanced brewing technology.

After-Sales Service
1. Guarantee: 3 years
2. Installation: Our engineers team will provide you the perfect installtion and commissioning service. Almost of them have been to 5 countries even more.