Supal (Changzhou) Precision Tools Co.,Ltd
| Payment Terms | T/T |
| Supply Ability | 10000000PCS |
| Delivery Time | 7-15Days |
| Packaging Details | 1.One piece in a platic pipe, 10 pieces per group. 2.Use the air bubble paper to encase the plastic pipe. 3.Put the goods encased with air bubble paper in the carton. 4.Other packing will be accept according to your needs. |
| Material | Solid Carbide |
| Diameter | Up to 30mm |
| Total Longth | Up to 200mm |
| Surface Treatment | Galvanized |
| Finish Type | Polished |
| Coating | Coated as your requirement |
| Brand Name | SUPAL |
| Place of Origin | Changzhou,Jiangsu,China |
| Model Number | OEM |
View Detail Information
Explore similar products
High Performance Solid Carbide 3F End Mills For Aluminum Reduced Shank OEM Tools
Solid Carbide Aluminum End Mill Various Coatings 50-150mm Legth
High Precision Tungsten Carbide CNC Lathe Tools 3C 45HRC 55HRC Polished 3 Flute
Aliminum End Mill For Metal Working CNC Tools Durable Cutters
Product Specification
| Payment Terms | T/T | Supply Ability | 10000000PCS |
| Delivery Time | 7-15Days | Packaging Details | 1.One piece in a platic pipe, 10 pieces per group. 2.Use the air bubble paper to encase the plastic pipe. 3.Put the goods encased with air bubble paper in the carton. 4.Other packing will be accept according to your needs. |
| Material | Solid Carbide | Diameter | Up to 30mm |
| Total Longth | Up to 200mm | Surface Treatment | Galvanized |
| Finish Type | Polished | Coating | Coated as your requirement |
| Brand Name | SUPAL | Place of Origin | Changzhou,Jiangsu,China |
| Model Number | OEM | ||
| High Light | carbide end mills for aluminum ，3 flute end mill aluminum | ||
Flattened Solid Carbide Cutting Tools 2 Flutes End Mill For Aluminium Woodworking Cutters
Milling aluminum alloy has the following major features:
1. Low hardness of aluminum alloy Compared with titanium alloy and other hardened steel,
the hardness of aluminum alloy is lower, of course, heat treatment, or the hardness of die-cast aluminum alloy is also high.
The HRC hardness of ordinary aluminum plates is generally below 40 degrees HRC.
Therefore, when machining an aluminum alloy, the load of the tool is small.
Because of the better thermal conductivity of aluminum alloy, the cutting temperature of milling aluminum alloy is relatively low, which can improve the milling speed.
2. The alloy of aluminum is low in plasticity and has low plasticity and low melting point.
When the aluminum alloy is processed, the problem of the sticking knife is serious, the chip discharging performance is poor, and the surface roughness is also relatively high.
In fact, the processing of aluminum alloy is mainly the sticking knife and the roughness is not good.
As long as the two problems of the sticky knife and the surface quality are solved, the problem of aluminum alloy processing is solved.
3, The tool is easy to wear because the tool material is not suitable, when processing aluminum alloy, the tool wear is often accelerated due to problems such as sticking knife and chip removal.
Machining aluminum alloys generally use a 3-blade aluminum milling cutter.
However, it is recommended that in most cases, a 3-blade flat end mill can be used.
1. The number of selected blades for aluminum tungsten steel milling cutters is generally 3 blades.
The material is generally selected from YG type hard alloys, which can reduce the chemical affinity of the tool and aluminum alloy.
General CNC tool brands have a series of special milling cutters for processing aluminum alloys.
2, high-speed steel material high-speed steel aluminum milling cutter is more sharp, but also can be well processed aluminum alloy.
3. Cutting parameters of milling aluminum alloy
High-speed large-feed milling can be selected for processing ordinary aluminum alloys.
Secondly, choose a larger front angle as much as possible to increase the chip space and reduce the phenomenon of sticking. If it is a finished aluminum alloy, it is not possible to use a liquid cutting fluid to avoid forming small pinholes on the machined surface.
Generally, kerosene or diesel oil can be used as the cutting fluid for processing aluminum plates.
The cutting speed of the machined aluminum alloy milling cutter varies depending on the material and parameters of the milling cutter and the machining process.
The specific cutting parameters can be processed based on the cutting parameters given by the manufacturer.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2010
Total Annual:
8000000-10000000
Employee Number:
40~60
Ecer Certification：
Verified Supplier
Supal (Changzhou) Precision Tools Co., Ltd. has been engaged in design, production and marketing of solid carbide tools for many years,with total investment of more than 10 million, and consists of a group of experienced employees.. As a professional tools manufacturer, it has become o... Supal (Changzhou) Precision Tools Co., Ltd. has been engaged in design, production and marketing of solid carbide tools for many years,with total investment of more than 10 million, and consists of a group of experienced employees.. As a professional tools manufacturer, it has become o...
Get in touch with us
Leave a Message, we will call you back quickly!