Cartesy Diagnosis Technology CO.,Ltd
| Packaging Details | Wooden package |
| Supply Ability | 300 Set/Sets per Month |
| Payment Terms | L/C, T/T |
| Delivery Time | 20-25 working days |
| Name | brake tester with axle load |
| Car Fitment | BMW - Europe |
| Port | Guangzhou |
| Roller Width | 2000 mm |
| Power Consumption | 3 kW |
| Maximum Axle Load | 15 kg |
| Brake Force Measurement Range | 39 kN |
| Roller Diameter | 202 mm |
| Brake Force Measurement Accuracy | ±1% |
| Axle Load Measurement Range | 0-7500 kg |
| Power Supply | 415V / 230V/50 Hz |
| Maximum Speed | 50 km/h |
| Place of Origin | China |
| Brand Name | cartesykj |
| Model Number | CTFZ-15JZ |
| Certification | CE |
View Detail Information
Explore similar products
Product Specification
| Packaging Details | Wooden package | Supply Ability | 300 Set/Sets per Month |
| Payment Terms | L/C, T/T | Delivery Time | 20-25 working days |
| Name | brake tester with axle load | Car Fitment | BMW - Europe |
| Port | Guangzhou | Roller Width | 2000 mm |
| Power Consumption | 3 kW | Maximum Axle Load | 15 kg |
| Brake Force Measurement Range | 39 kN | Roller Diameter | 202 mm |
| Brake Force Measurement Accuracy | ±1% | Axle Load Measurement Range | 0-7500 kg |
| Power Supply | 415V / 230V/50 Hz | Maximum Speed | 50 km/h |
| Place of Origin | China | Brand Name | cartesykj |
| Model Number | CTFZ-15JZ | Certification | CE |
| High Light | Vehicle inspection Roller Brake Tester ，integrated Roller Brake Tester ，automobile brake tester with lift | ||
Vehicle inspection equipment CTFZ-15JZ Roller opposite forces type automobile brake tester with lift Bench Roller Brake Tester
Its main for the brake performance testing. The roller brake tester can detect and calculation the each axis ((left and right wheels) block force of car, brake force and the deviation of brake force (process deviation, and maximum deviation), as well as the ratio of brake force and axis load , the ration of hand brake force and whole quality of the car. The equipment is core part of the motor vehicle security performance detection and the high technical performance requirements of safety testing equipment.
The tester can lift its own roller by hydraulic pump station, thus all heavy-duty truck can do all the axis (wheel) weight load testing. Which can meet the latest national standard GB21681 and can do the brake test for all kinds of heavy-truck vehicle.
1 . The main body is wholly welded, with high intension, no need to fix the main body on the ground with ground bolts and it is easy to adjust and install.
2 . The rollers are covered with high quality surface sand, advanced adhesives and technology, the adhesion modulus is above 0.85 in case of both dry and wet, the longevity is over 200000 times. Test precision is high, repetition performance is good, brake force errors <1.5% (National standard <3%).
3 . The reducer is manufactured by European technology, and the main parts of motor, bearing, sensor, etc. are all domestic famous brand products, which have passed ISO9001 international quality system certification and CE certification
4.The third roller can response and stop the motor automatically to avoid the wear of the tyre after the tyre locked during the testing
5.You can choose the tester with or without airbag lifting device.(The airbag lifting device is for the convenience of the vehicle entering and leaving the tester)
| a) Communication desk with integrated Switching and electro-cabinet Communication Desk |
| b) Switching cabinet for test stand control |
| c) Lockable drawer for keyboard and mouse including storage shelf. |
| d) Measurement value-Differential display and graphic on PC-Monitor |
| e) Automatic start-up monitoring |
| f) Delayed switch on automatic after driving onto the test stand. |
| g) Automatic slip switch-off with pointer stop and restart automatic. |
| h) Switch off automatic after exiting the test stand. |
| i) Single wheel switching |
| j) Electronic strain gauge measurement system |
| k) Lockable main switch |
| l) Splash-Proof Motors |
| m) PC screen to display damping rate "D", with left/right brake differential and graphic interpretation. |
| n) Fully automatic testing procedure Automatic start-up of test stand when both test plates are loaded over 60 kg. |
| o) Frequency controlled plate excitation by electric motors to determine the maximum vibration amplitude, with subsequent evaluation of axle damping. |
| p) Floor unit as self-supporting framework |
| q) Parallelogram guided test plates and therefore no fixed wheel testing points necessary. |
Using of reinforced steel guarantees strong and durable structure-bodies.Corundum-sand roller sets with high adhesion in both dry and wet conditions.Automatic start and tyre anti-skid program. No need for anchor bolt installation.With calibration device.
| Performance Specifications |
| i. Single speed with 4WD function |
| ii. Axle load (drive over) 4t |
| iii. Brake force range:0-10000N. |
| iv. Testing Speed: 5 km/h |
| v. Motor Power: 3 kW X 2 |
| vi. Power Supply: 415V / 230V/50 Hz |
| vii. Drive power: 2 x 4 kW – Measurement |
| viii. value display :0-8 kN |
| ix. Roller diameter:202 mm |
| xi:Fuse: 25 A slow |
| xii. Track width:min 780 , max 2200 mm |
Take apart the box. Then take out all of the parts. Check the integrality of these products to see whether there is defectiveness or not. Then assemble them according following instruction.
1．Strictly perform construct groundsill supplied by Cartesy Diagnosis Technology Co., Ltd., when water table is high, please take prevent water leakage into consideration, make sure it is dryness in groundsill groove.
2. Pay attention to people and equipment when put the machine into groundsill by sling gently.
3. Use water level and adjust device to adjust the equipment’s level.
4. The company provides a rigorous construction of the base map. In areas where the groundwater level is high, consider the water leakage measures and keep the drying in the foundation tank. Pay attention to the pre-buried power supply, the signal cable and the gas pipeline.
5. Install the console and connect wire, equipment calibrate and adjustment. (calibrate finished when leave factory)
6. By the professional electrical personnel according to map laying cable, signal line to the middle of the base of the mechanical platform.
7. Open the cover plate and the middle cover, use the level to adjust the equipment level, so that the equipment rack plane and ground level and maintain the level
1. who are we?
We are based in Guangdong, China, start from 2011,sell to Domestic Market(50.00%),South Asia(10.00%),Africa(10.00%),Eastern Europe(10.00%),Oceania(5.00%),Western Europe(5.00%),Eastern Asia(5.00%),Northern Europe(3.00%),North America(2.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment.
3.what can you buy from us?
Vehicle Sideslip Tester,Roller brake tester with axle load,flat plate test line,Automobile power performance and Chassis dynamometer,Vehicle suspension performance Tester.
4. why should you buy from us not from other suppliers?
Multi design of overall system scheme Site layout planning and Technological Consulting Systematic site installation and training Online daily maintenance and technical support.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,EXW；
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,PayPal,Cash;
Language Spoken:English,Chinese
Company Details
Business Type:
Manufacturer,Importer,Exporter,Seller
Year Established:
2011
Total Annual:
900-1000
Employee Number:
56~60
Ecer Certification：
Verified Supplier
Zhongshan Cartesy Diagnosis Technology Co., Ltd. is a professional manufacturer specialized in R&D, production and sales of vehicle safety test equipment. The factory is located in QiCun Industrial Zone, Tanzhou, Zhongshan of the Pearl River Delta, adjacent ... Zhongshan Cartesy Diagnosis Technology Co., Ltd. is a professional manufacturer specialized in R&D, production and sales of vehicle safety test equipment. The factory is located in QiCun Industrial Zone, Tanzhou, Zhongshan of the Pearl River Delta, adjacent ...
Get in touch with us
Leave a Message, we will call you back quickly!