Loudi Antaeus Electronic Ceramic Co.,Ltd.
| Payment Terms | T/T or Negotiation |
| Supply Ability | Full Supply |
| Delivery Time | 15-45 days |
| Packaging Details | Inner vacuum packaging, outside carton. |
| Chemical ingredients | Al2O3 |
| Max. Use Temp. | 1650℃ |
| Bulk Density | 3.6g/cm3-3.9g/cm3 |
| Water absorption | 0% |
| ROHS Hardness | ≥85 |
| Flexural strength | 358(52) - 550 Mpa(psix10^3) |
| Compressive Strength | 2068(300) - 2600(377) Mpa(psix10^3) |
| Coefficient of thermal expansion | 7.6 - 8.2 / 1X10^-6/℃ |
| Coefficient of thermal conductivity | 16-30.4 / W/m.K |
| Thermal Shock Resistance | 250℃ |
| Dielectricity constant | 9-9.7 / 1MHz.25℃ |
| Dielectric strength | 8.3(210) - 8.7(220) / ac-kV/mm(ac V/mil) |
| Volume Resistivity | >10^13 ohm-cm |
| Brand Name | Antaeus |
| Model Number | AD-A022 |
| Certification | / |
| Place of Origin | Hunan,China |
View Detail Information
Explore similar products
High Fracture Toughness 99% Al2O3 Ceramic Products for Machinery
Low Thermal Conductivity 99 Al2O3 Ceramic Components For Power Lines
High Precision 3.6g/cm3 - 3.9g/cm3 Alumina Ceramic Components
99 Percent Al2O3 Alumina Ceramic Parts With High Fracture Toughness
Product Specification
| Payment Terms | T/T or Negotiation | Supply Ability | Full Supply |
| Delivery Time | 15-45 days | Packaging Details | Inner vacuum packaging, outside carton. |
| Chemical ingredients | Al2O3 | Max. Use Temp. | 1650℃ |
| Bulk Density | 3.6g/cm3-3.9g/cm3 | Water absorption | 0% |
| ROHS Hardness | ≥85 | Flexural strength | 358(52) - 550 Mpa(psix10^3) |
| Compressive Strength | 2068(300) - 2600(377) Mpa(psix10^3) | Coefficient of thermal expansion | 7.6 - 8.2 / 1X10^-6/℃ |
| Coefficient of thermal conductivity | 16-30.4 / W/m.K | Thermal Shock Resistance | 250℃ |
| Dielectricity constant | 9-9.7 / 1MHz.25℃ | Dielectric strength | 8.3(210) - 8.7(220) / ac-kV/mm(ac V/mil) |
| Volume Resistivity | >10^13 ohm-cm | Brand Name | Antaeus |
| Model Number | AD-A022 | Certification | / |
| Place of Origin | Hunan,China | ||
| High Light | 95% Alumina Oxide Ceramics ，Relay Alumina Oxide Ceramics ，95% Ceramic brazed assembly | ||
Alumina ceramic components / relay ceramic assemblies / ceramic - metal brazed contactor
1. Description:
The control behaviour of an electro-dynamic motor, also known as a moving coil motor, is superior to other motor types. This is also true for the linear version of this motor type. The classic solution to produce an x–y movement with a long-stroke is to apply a stack of at least two linear motors. A rising moving mass, combined with a limited mechanical stiffness, limits the bandwidth. An alternative is the planar motor, which generates x- and y-movements. This paper describes an electro-dynamic planar motor with moving coils, which levitates and propels itself over long x- and y-strokes under full control over six degrees of freedom (6-DOF).
2. Feature Advantages:
1) High elasticity modulus
2) High compressive strength.
3) Anti corrosion
4) Abrasion resistance
5) Impact resistance
6) High precision
7) High stability
8) Good advanced ceramic materials
9) High welding sealing performance
10) High hardness and high density
11) Low thermal conductivity
12) Chemical inertness
13) Good wear resistance
14) High Fracture toughness
15) Good insulation performance
16) High temperature resistance
17) A variety of specifications is available
18) Satisfy various technical requests
19) Lower medium spoilage
20) Stiffness texture
21) Widely apply for automotive ceramic sensor , ceramic heater ,electric heating
3. Material Features / Properties:
| Color | White or Ivory | White or Ivory | White or Ivory | |
| Density | g/cm 3 | 3.82 | 3.9 | 3.92 |
| Hardness | HRA | 83 | 85 | 85 |
| Flexural Strength | Mpa (psi*10 3 ) | 375 | 386 | 381 |
4. Technical Parameters:
| Technical Parameters of Ceramics | ||||||||
| Items | Test Conditions | Unit or Symbol | 99% AL2O3 | 95% AL2O3 | 90% AL2O3 | Zirconia | Steatite | Silicon Carbide |
| Volume Density | -- | g/cm3 | ≥3.70 | ≥3.62 | ≥3.40 | ≥5.90 | ≥2.60 | ≥3.08 |
| Tightness | -- | Pa·m³/s | ≤1.0×10-11 | ≤1.0×10-11 | ≤1.0×10-11 | - | - | - |
| Liquid Permeability | -- | -- | Pass | Pass | Pass | Pass | - | |
| Flexural Strength | - | MPa | ≥300 | ≥280 | ≥230 | ≥1100 | ≥120 | ≥400 |
| Elastic Modulus | - | GPa | - | ≥280 | ≥250 | ≥220 | - | 400 |
| Poisson Ratio | - | - | - | 0.20～0.25 | 0.20～0.25 | - | - | - |
| Thermal Shock Resistance | 800℃( Room Temperature) Cycle: 10 times | Pass | Pass | Pass | - | - | - | |
| Coefficient of Linear Expansion | 20℃～100℃ | ×10-6 K-1 | - | - | - | ≤8 | - | |
| 20℃～500℃ | ×10-6 K-1 | 6.5～7.5 | 6.5～7.5 | 6.5～7.5 | 6.5～11.2 | - | - | |
| 20℃～800℃ | ×10-6 K-1 | 6.5～8.0 | 6.5～8.0 | 6.3～7.3 | - | 4 | ||
| 20℃～1200℃ | ×10-6 K-1 | - | 7.0～8.5 | - | - | - | - | |
| Coefficient of Thermal Conductivity | 20℃ | W/(m·k) | - | - | - | - | - | 90～110 |
| 1000℃ | ||||||||
| Dielectric Constant | 1MHz 20℃ | - | 9.0～10.5 | 9.0～10 | 9.0～10 | - | ≤7.5 | - |
| 1MHz 50℃ | - | - | 9.0～10 | - | - | - | - | |
| 10GHz 20℃ | - | 9.0～10.5 | 9.0～10 | 9.0～10 | - | - | - | |
| Volume Resistivity | 100℃ | Ω·cm | ≥1.0×1013 | ≥1.0×1013 | ≥1.0×1013 | - | ≥1.0×1012 | - |
| 300℃ | ≥1.0×1013 | ≥1.0×1010 | ≥1.0×1013 | - | - | - | ||
| 500℃ | ≥1.0×109 | ≥1.0×108 | -- | - | - | - | ||
| Disruptive Strength | D.C | kV/mm | ≥17 | ≥15 | ≥15 | - | ≥20 | - |
| Chemical Durability | 1:9HCl | mg/c㎡ | ≤0.7 | ≤7.0 | - | - | - | - |
| 10%NaOH | mg/c㎡ | ≤0.1 | ≤0.2 | - | -- | - | - | |
| Grain Size | - | μm | - | 3~12 | - | - | - | - |
5. Process Flows:
Formulating --- Granulating --- Forming --- Sintering --- Grinding --- Inspecting --- Packing
6. Application Fields:
New energy vehicles, charging piles, solar power generation, energy storage and power storage system, electric vehicle power system and so on.
7. Production Facilities: Prilling Tower , Forming Machine , High Temperature Sintering Kiln
8. Detection Devices:
Electric Performance Tester , Film Thickness Analyzer , Granulometer , Helium Mass Spectrometer Leak Detector , Universal Pull Force Meter
9. Order Flow Steps as belows: Inquiry ---Quotation --- Place an order --- Production --- Delivery
10. Our advantages: Quality Assurance ; Price Competitive ; Factory Supply Directly ; Good Service
11. Shipping and Package:
12. Our aimed market:
13. Guiding questions for material selection:
In order to select the appropriate material for your application, there are several questions that you should consider.
1) Are the mechanical properties important?
2) Will the part be exposed to wear/friction/impacts?
3) How many pieces are you looking to have made in your first batch?
4) What type of atmosphere will the part be operating in; inert or oxidizing?
5) What is the maximum operating temperature of the component?
6) Will the component experience any thermal shock?
7) Is electrical insulation important?
8) Is thermal conductivity important?
9) How important are tolerances and surface finish?
Notes:Above information only for reference and please contact with us for more details freely when you have any inquiry!
Loudi Antaeus Electronic Ceramic Co.,Ltd
Factory address:Loudi Economy and Technological Development Zone,Hunan,China.
Contact person:Alice Deng
Tel:+8615073852630 (wechat)
Mail: alice@andidz.com
Skype: alicedeng0629
Company Details
Business Type:
Manufacturer
Year Established:
2004
Total Annual:
3500000-5000000
Employee Number:
400~600
Ecer Certification：
Verified Supplier
Antaeus was established in 2004 and it is a state-level-high tech enterprise which integrates production and sales of advanced ceramics,new energy automotive ceramic parts,smart sensor ceramics,electronic information ceramics,rail transit,military and aerospace cera... Antaeus was established in 2004 and it is a state-level-high tech enterprise which integrates production and sales of advanced ceramics,new energy automotive ceramic parts,smart sensor ceramics,electronic information ceramics,rail transit,military and aerospace cera...
Get in touch with us
Leave a Message, we will call you back quickly!