T4 CFL LED Light E27 32W Full Spiral Lamps For Home Lighting SDCM < 5

Product Specification

T4 32W 1750 LM Full Spiral 32W CFL Compact Fluorescent Lamps 2700K - 6400K 220 Volt

Description

1 . Passing the EMC test .

2 . Turn on – off time is more than 12 000 times .

3 . The average lifetime of our lamp is at least 6000h .

4 . Voltage : Both 110 - 130V and 220 - 240V available with 50 / 60Hz ; Wide range voltage is possible .

5 . Using PBT plastic cover, PBT have two advantage : ① Inflaming retarding ② High temperature resistance

Lamp parameters

Features

1 . Wattage : 32W

2 . Ventilation hole on the plastic cover

3 . 100% triphosphor A - grade powder

      1 ) Luminous efficency: > 60 lm / w

      2 ) Brightness maintance: > 80% after 2000H

      3 ) CRI : > 80 Ra

      4 ) SDCM : < 5

4 . P.F. : > 0.5

5 . Power consumption: < 10%

6 . Lead free glass tube

7 . Compact type , integrate the ballast in the lamp

8 . Can start under the condition of - 30 ℃ and low voltage .

9 . No flicker , No noise , No electromagnetic interference ( EMI ) .

10 . All products are output strictly under ISO 9001 Quality Management System and CE satisfied .

Competitive advantage

1 . Strict raw materials inspection .

2 . After laoding the container,we will trace the life time of ech order,we will pick 10 pcs of each item to light in the ageing room till the lamp die , so we can trace down the real life time of each order .

3 . In the mass production , our QC will take selective examination on every step , such as Plug-in , Wave soldering , PCB test , Tube glue , Assembly , Print , Ageing , Packing .

4 . we are testing every lamp before packed in the cartons .

5 . Technical parameter adjustment :

     1 ) Technicians will tune the technical parameters of each items to make sure the Wattage,P.F living up to the requirement of customer

     2 ) Destructive test , light it in the oven to be under the conditions of high temperature and high voltage

     3 ) Turn on off test , to make sure the life time of the lamp

     4 ) Start test in low temperature and low voltage ( light in the fridge )

6 . In the warehouse,our QCs will take sampling inspection before load the container , if not qualified with the AQL , we will rework .

Quality Control ( QC )

1 . Strict raw materials inspection .

2 . In the warehouse , our QCs will take sampling inspection before load the container , if not qualified with the AQL , we will rework .

3 . we are testing every lamp before packed in the cartons .

4 . Technical parameter adjustment :

     1 ) Technicians will tune the technical parameters of each items to make sure the Wattage , P.F.living up to the requirement of customer

     2 ) Destructive test , light it in the oven to be under the conditions of high temperature and high voltage

     3 ) Turn on off test , to make sure the life time of the lamp

     4 ) Start test in low temperature and low voltage ( light in the fridge )

5 . In the mass production , our QC will take selective examination on every step , such as Plug-in , Wave soldering , PCB test , Tube glue , Assembly , Print , Ageing , Packing .

6 . After laoding the container , we will trace the life time of ech order , we will pick 10 pcs of each item to light in the ageing room till the lamp die , so we can trace down the real life time of each order .

Application

Widely used in home & commercial Lighting , always using together with the downlight fixtures , applying in office , Hallway , Hotel , room , shop , ect .