ZHEJIANG XINCHOR TECHNOLOGY CO., LTD.
| Delivery Time | 30 days |
| Packaging Details | 100 meters per roll in carton |
| Materials | Epoxy Resin |
| Thixotropy Index | >3mm |
| Resistance to freezing and thawing | Reduction rate of shearing strength ≤5% |
| Packing | Barrel or plastic bucket |
| CE approved | Yes |
| Shelf life | 2 years |
| Brand Name | XINCHOR |
| Model Number | XQ-XW21C |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Leveling Carbon Fiber Adhesive Paste Consistency For Vertical Overhead
Flow Less Quick Set Epoxy , Epoxy Adhesive Glue High Load Capacity
High Strength Clear Epoxy Glue , Epoxy Cement Glue Structural Paste Adhesive
Carbon Fiber Adhesive Shock Resistance Solvent Free Convenient Mix Ratio
Product Specification
| Delivery Time | 30 days | Packaging Details | 100 meters per roll in carton |
| Materials | Epoxy Resin | Thixotropy Index | >3mm |
| Resistance to freezing and thawing | Reduction rate of shearing strength ≤5% | Packing | Barrel or plastic bucket |
| CE approved | Yes | Shelf life | 2 years |
| Brand Name | XINCHOR | Model Number | XQ-XW21C |
| Certification | CE | Place of Origin | China |
| High Light | two part epoxy ，epoxy resin glue | ||
Structural Strengthening Carbon Fiber Adhesive With High Tensile Strength
Carbon Fiber Primer
Carbon Fiber Leveling Adhesive
Carbon Fiber Reinforced Polymer
Structural Strengthening Carbon Fiber Adhesive With High Tensile Strength
Xinchor CFRP Carbon Fiber Adhesive is Low viscosity, strong penetration ability, used for smearing of the underlayer of reinforced members' surface, the role is penetration bonding reinforcement to the broken concrete after chiseling off; of the surface of members was intact, smearing was not needed.
Application Range
Load increases
Seismic reinforcement
Improve structural state
Damage of structural parts
Change the structural function
Remit mistakes in design and construction
Flexural strengthening,
Shear strengthening,
Column confinement and ductility improvement.
Load Increases
Increased live loads
Increased traffic volumes on bridges
Installation of heavy machinery in industrial buildings
Vibrating structures
Changes of building utilization
Seismic Strengthening
Column wrapping
Masonry walls
Damage to Structural Parts
Aging of construction materials
Vehicle impact
Fire
Blast resistance
| Testing project | Standard | Result | ||
| Lot#1 | Lot#2 | Lot#3 | ||
| Tensile Strength | ≥38 Mpa | 46.7 | 48.6 | 47.6 |
| Tensile modulus of elasticity | ≥2400 MPa | 2437 | 2484 | 2473 |
| Elongation | ≥1.5% | 2.79 | 2.80 | 2.63 |
| Bending Strength | ≥50Mpa (no fragmental damage) | 91.0 | 88.8 | 84.9 |
| Compressive Strength | ≥70 Mpa | 77.6 | 83.0 | 81.5 |
| Bonding Capacity | ||||
| Steel-Steel Tensile Shear Strength | (23±2)℃, (50±5)%RH ≥14 Mpa | 14.3 | 14.9 | 14.2 |
| Steel-Steel bonding tensile strength | ≥40 Mpa | 40.7 | 40.1 | 41.1 |
| Steel-Steel T-impact peeling strength | ≤20 mm | 0 | 0 | 0 |
| Steel to C45 Concrete cohesive haul strength | ≥2.5 Mpa (Concrete cohesion damage) | 4.5 | 4.2 | 4.4 |
| Thermal deformation temperature | ≥65℃ | 65.8 | 66.1 | 66.4 |
| Non-volatile content | ≥99% | 99.5 | 99.5 | 99.5 |
| Thixotropy Index | ≥3mm | 3.3 | 3.2 | 3.2 |
| Ageing resistance to heat and humidity | Reduction rate of shearing strength ≤12% | 11.6 | 11.2 | 10.5 |
| Ageing resistance to heat | Reduction rate of shearing strength ≤5% | 3.9 | 4.7 | 4.0 |
| Resistance to alkaline medium | No reduction of strength and only destruction of concrete. without any cracks, stripping, foaming on appearance | pass | pass | pass |
| Resistance to alkaline medium | No reduction of strength and only destruction of concrete. without any cracks, stripping, foaming on appearance | pass | pass | pass |
| Resistance to freezing and thawing | Reduction rate of shearing strength ≤5% | 2.9 | 3.4 | 3.5 |
| Resistance to long term stress | No defect after steel to steel shearing, The deformation value of creep ＜0.4mm | 0.2 | 0.1 | 0.2 |
| Resistance to salt spray | Reduction rate of shearing strength ≤5% | 4.1 | 4.5 | 4.1 |
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2005
Total Annual:
10,000,000-30,000,000
Employee Number:
50~100
Ecer Certification：
Site Member
Established in 2005, Zhejiang Xinchor Technology Co., Ltd. Focuses on research, development, production and marketing for building reinforcement materials and chemical anchoring adhesive. Our Headquarter and marketing center located in West Lake Technological Park in Hangzhou, only 2 ho... Established in 2005, Zhejiang Xinchor Technology Co., Ltd. Focuses on research, development, production and marketing for building reinforcement materials and chemical anchoring adhesive. Our Headquarter and marketing center located in West Lake Technological Park in Hangzhou, only 2 ho...
Get in touch with us
Leave a Message, we will call you back quickly!