wuxi xinzheng
| Payment Terms | L/C, T/T |
| Size | 580x500x1200mm |
| Weight (including battery) | 50KG |
| Ambient temperature | 5 to 40 degrees |
| Protection level | IP20 |
| Antiskid coefficient of ground | >0.5 |
| Vertical obstacle surmounting ability | 10mm |
View Detail Information
Explore similar products
Virus Killing Robot help defeat Coronavirus Autonomous Robots Are Helping Kill
Unmanned Antivirus Robot For COVID-19
UV Disinfection Anti Epidemic Robot For COVID-19
Covid 19 Virus Killing Robot
Product Specification
| Payment Terms | L/C, T/T | Size | 580x500x1200mm |
| Weight (including battery) | 50KG | Ambient temperature | 5 to 40 degrees |
| Protection level | IP20 | Antiskid coefficient of ground | >0.5 |
| Vertical obstacle surmounting ability | 10mm | ||
| High Light | Class 100 disinfection uv robot ，IP20 uv cleaning robot | ||
ARIS-K2 series anti-virus robot to help fight COVID-19, use short-wave UVC ultraviolet rays for disinfection and sterilization, which can destroy the DNA and RNA of germs and cause them to die within a few minutes, which can effectively kill the bacteria. After testing, in the high-level disinfection mode, the spores and various multi-drug resistant bacteria on the surface of the environment (smooth surface, rough porous surface) and various multi-drug resistant bacteria can completely achieve the high-level disinfection requirement of 99.9999%.
Features
Ultraviolet indoor mobile multi-point disinfection
Configure infrared body temperature monitoring, body temperature detection during the day, and disinfection at night
Industry's largest power efficiency killing, cumulative UV intensity up to 270W / CM2
Laser SLAM algorithm completes the construction and positioning of the global environment map
Fully mature cognitive and positioning navigation capabilities
Ultraviolet killing robot is suitable for shopping malls, stations, offices,
production sites, etc.
Robot conforms to [National Standard] GBT 30030-2013 Automatic Guided Vehicle (AGV)
UV disinfection conforms to [National Standard] GB 19258-2012 UV germicidal lamp
Parameters
| Category | Item | Parameter |
| Material of body | Material of body | Cold rolled steel + plastic |
| Size | Size | 580x500x1200mm |
| Weight | Weight (including battery) | 50KG |
| Ambient temperature | 5 to 40 degrees | |
| Ambient humidity | Relative humidity 5 to 95% (no condensation) | |
| Running environment | Indoor use only, no excessive dust, no corrosive gas | |
| Environmental conditions | Protection level | IP20 |
| Cleanliness grade | Class100 | |
| Antiskid coefficient of ground | >0.5 | |
| Ground requirement | Horizontal ground for concrete pouring (without water, oil or dust) | |
| Minimum flatness of ground | Ff25 (* AC1117 standard) | |
| Vertical obstacle surmounting ability | 10mm | |
| Ability to cross gullies | ±20mm | |
| Ground conditions | Climbing ability | 5° |
| Path selection | Secure scanning lidar based on environment mapping independent path selection | |
| Navigation | Navigation system | Provide large-scale lidar mapping, lidar positioning, lidar path planning, lidar navigation functions, including obstacle avoidance and recovery control. |
| Rendering of environmental map | Scanning with Slam (positioning and mapping ad the same time) | |
| Navigation mode | Laser landmark navigation | |
| Running speed | Maximum speed | 1 m / S (theoretical maximum speed) |
| Maximum rotational speed | 180% | |
| Mobility performance | Stopping precision | Position accuracy1 cm, angle accuracy:+ 2° |
| Texture of material | Polyurethane | |
| Driving wheel | Size | Diameter 150 * 35mm |
| Battery | Industrial grade lithium iron phosphate battery, high stability, metal shell safety protection, earthquake resistance, accidental strong impact damage, no open fire | |
| Capacity | 0.75kwh | |
| Running time | 6H | |
| Battery | Charging time | <2.5H |
| Battery life | Cycle life < 1500 times, keep 80% capacity after 1500 times | |
| Charging mode | Auto / manual | |
| Power output | 12V 5A / 24V 5A | |
| protection system | Power protection, temperature protection |
Company Details
Business Type:
Manufacturer
Employee Number:
>100
Ecer Certification：
Active Member
Wuxi Xinzheng Precision Machinery Manufacturing Co., Ltd. is a professional OEMODMOBM enterprise integrating R&D, production and sales. The company is deeply involved in the field of precision manufacturing and automation control, and is committed to providing users with design and production of... Wuxi Xinzheng Precision Machinery Manufacturing Co., Ltd. is a professional OEMODMOBM enterprise integrating R&D, production and sales. The company is deeply involved in the field of precision manufacturing and automation control, and is committed to providing users with design and production of...
Get in touch with us
Leave a Message, we will call you back quickly!