Shenzhen Bicheng Electronics Technology Co., Ltd
| Payment Terms | T/T, Paypal |
| Supply Ability | 45000 pieces per month |
| Delivery Time | 5-6 working days |
| Packaging Details | Vacuum |
| Glass Epoxy | AD450 |
| Final height of PCB | 1.8 mm ±0.1mm |
| Final foil external | 1.0 oz |
| Surface Finish | Immersion gold |
| Solder Mask Color | N/A |
| Colour of Component Legend | N/A |
| TEST | 100% Electrical Test prior shipment |
| Brand Name | Bicheng Technologies Limited |
| Model Number | BIC-160-V5.8 |
| Certification | UL |
| Place of Origin | China |
View Detail Information
Explore similar products
Rogers High Frequency PCB Built on 20mil 0.508mm RO4350B With Immersion Gold and
Taconic High Frequency PCB Made on TLY-5 7.5mil 0.191mm With DK2.2 for
RT/Duroid 5880 10mil 0.254mm Rogers High Frequency PCB for Microstrip and
Taconic RF-60A PCB 60mil 1.5mm High Frequency PCB With Immersion Silver For
Product Specification
| Payment Terms | T/T, Paypal | Supply Ability | 45000 pieces per month |
| Delivery Time | 5-6 working days | Packaging Details | Vacuum |
| Glass Epoxy | AD450 | Final height of PCB | 1.8 mm ±0.1mm |
| Final foil external | 1.0 oz | Surface Finish | Immersion gold |
| Solder Mask Color | N/A | Colour of Component Legend | N/A |
| TEST | 100% Electrical Test prior shipment | Brand Name | Bicheng Technologies Limited |
| Model Number | BIC-160-V5.8 | Certification | UL |
| Place of Origin | China |
Arlon Microwave PCB Built on AD450 70mil 1.778mm DK4.5 With Immersion Gold for Circuit Board Miniaturization
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
Rogers' (Arlon) AD450 is a woven fiberglass reinforced, ceramic filled, PTFE based composite material for use as a printed circuit board substrate. The woven fiberglass provides better dielectric constant and thickness uniformity, better dimensional stability as well as reduced manufacturing costs.
The electrical properties of AD450 suggest it can readily replace FR-4 in applications where higher frequencies and expectations for increased fidelity with broadband signal are beyond the performance offered by FR-4.
With a dielectric constant of 4.5, most FR-4 designs can be readily transferred. Its higher thermal conductivity and lower CTE also promote its use in higher power designs, where temperature extremes and heat rejection are primary considerations.
AD450 is compatible with processing used for standard PTFE based printed circuit board substrates. In addition, its low Z-axis thermal expansion will improve plated through hole reliability, compared to typical PTFE based laminates.
Typical Applications:
1. Circuit Board Miniaturization
2. Multimedia Transmission Systems
3. Wide Band Antenna Applications
4. Replacement of FR-4 in Higher Frequency Applications
Figure 1 demonstrates the stability of dielectric constant across frequency.
Figure 2 demonstrates the stability of dissipation factor across frequency.
Our PCB Capability(AD450)
| PCB Material: | Woven Fiberglass Re inforced, Ceramic filled, PTFE based Composite |
| Designation: | AD450 |
| Dielectric constant: | 4.5 |
| Layer count: | Double Layer, Multilayer, Hybrid PCB |
| Copper weight: | 0.5oz (17 µm), 1oz (35µm), 2oz (70µm) |
| PCB thickness: | 10mil (0.254mm), 20mil (0.508mm), 30mil(0.762mm), 40mil(1.016mm), 50mil (1.27mm), 60mil (1.524mm), 70mil(1.778mm), 90mil (2.286mm), 180mil (4.572mm), 200mil (5.08mm), 230mil (5.842mm) |
| PCB size: | ≤400mm X 500mm |
| Solder mask: | Green, Black, Blue, Yellow, Red etc. |
| Surface finish: | Bare copper, HASL, ENIG, OSP etc.. |
Data Sheet of AD450
| Property | Test Method | Condition | Result |
| Dielectric Constant @ 200 MHz | IPC TM-650 2.5.5.6 | C23/50 | 4.5 |
| Loss Tangent @ 10 GHz | IPC TM-650 2.5.5.6 | C23/50 | 0.0035 |
| Thermal Coefficient of Er | IPC TM-650 2.5.5.6 | - 10℃ TO +140℃ | -233.5 |
| Copper Peel Strength (lb/in) | IPC TM-650 2.4.8 | A, TS | >12 |
| Volume Resistivity (MΩ-cm) | IPC TM-650 2.5.17.1 | C96/35/90 | 1.2 X 109 |
| Surface Resistivity (MΩ) | IPC TM-650 2.5.17.1 | C96/35/90 | 4.5 X 107 |
| Arc Resistance (seconds) | ASTM D-495 | D48/50 | >180 |
| Tensile Modulus (kpsi) | ASTM D-638 | A, 23℃ | >700 |
| Tensile Strength (kpsi) | ASTM D-882 | A, 23℃ | >20 |
| Compressive Modulus (kpsi) | ASTM D-685 | A, 23℃ | >350 |
| Flexural Modulus (kpsi) | ASTM D-790 | A, 23℃ | >540 |
| Dielectric Breakdown (kV) | ASTM D-149 | D48/50 | >45 |
| Density (g/cm3) | ASTM D-792 Method A | A, 23℃ | 2.45 |
| Water Absorption (%) | IPC TM-650 2.6.2.2 | E1/105 + D24/23 | 0.07 |
| Coefficient of Thermal Expansion (ppm/℃) X Axis Y Axis Z Axis | IPC TM-650 2.4.24 TMA | 0℃ to 100 ℃ | 8 11 42 |
| Thermal Conductivity (W /mK) | ASTM E-1225 | 100℃ | 0.38 |
| Outgassing Total Mass Loss (%) Collected Volatile Condensable Material (%) Water Vapor Recovered | NASA SP-R-0022A Maximum 1.00% Maximum 0.10% | 125℃, ≦10-6 torr | 0.01 0.01 0.00 |
| Flammability | UL 94 Vertical Burn | C48/23/50, E24/125 | UL94-V0 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2003
Total Annual:
10 million-18 million
Employee Number:
350~450
Ecer Certification：
Site Member
Founded in 2003, Shenzhen Bicheng Electronics Technology Co., Ltd is an established high frequency PCB supplier and exporter in Shenzhen China, severing cellular base station antenna, satellite, high frequency passive components, microstrip line and band line circuit, millimeter wave equipm... Founded in 2003, Shenzhen Bicheng Electronics Technology Co., Ltd is an established high frequency PCB supplier and exporter in Shenzhen China, severing cellular base station antenna, satellite, high frequency passive components, microstrip line and band line circuit, millimeter wave equipm...
Get in touch with us
Leave a Message, we will call you back quickly!