Ecer asks for your consent to use your personal data to:
Personalised advertising and content, advertising and content measurement, audience research and services development
Store and/or access information on a device
Your personal data will be processed and information from your device (cookies, unique identifiers, and other device data) may be stored by, accessed by and shared with 135 TCF vendor(s) and 65 ad partner(s), or used specifically by this site or app.
Some vendors may process your personal data on the basis of legitimate interest, which you can object to by do not consent. Contact our platform customer service, you can also withdraw your consent.
Your message must
be between 20-3,000 characters!
Submit Requirement
Thank You！
Your requirement has been sent. we will contact you quickly!
{"title":"DF14 wire connector crimp terminals with 1.25mm pitch, gold-flash phosphor","imgUrl":"https:\/\/img.chinax.com\/nimg\/01\/15\/c69ca6098ac2e01a51f115f6f17b-200x200-1\/df14_wire_connector_crimp_terminals_with_1_25mm_pitch_2c_gold_flash_phosphor.jpg","attrs":{"Brand Name":"HRT","Model Number":"A1253-T","Certification":"ISO9001\/ ISO14001\/UL\/RoHS\/REACH","Place of Origin":"China"}}
{"title":"Crimp Wire Connector Terminals Tin Plated Phosphor Bronze Connectors For AWG30#","imgUrl":"https:\/\/img.chinax.com\/nimg\/87\/0d\/68895b027f442191e28a6be9a982-200x200-1\/crimp_wire_connector_terminals_tin_plated_phosphor_bronze_connectors_for_awg30_23_to_26_23.jpg","attrs":{"Brand Name":"HRT","Model Number":"A2001-TPE","Certification":"ISO9001\/ ISO14001\/UL\/RoHS\/REACH","Place of Origin":"Dongguan, China(mainland)"}}
{"title":"ISO Wire To Wire Connector Terminals 2.50mm Pitch Connector Crimp Terminal","imgUrl":"https:\/\/img.chinax.com\/nimg\/43\/0e\/0862fbad0003c3b88af091651eb3-200x200-1\/iso_wire_to_wire_connector_terminals_2_50mm_pitch_connector_crimp_terminal.jpg","attrs":{"Brand Name":"HRT","Model Number":"C2505F-T","Certification":"ISO9001\/ ISO14001\/UL\/RoHS\/REACH","Place of Origin":"Dongguan, China(mainland)"}}
{"title":"2.0mm Pitch Wire To Wire Connector With Tinned Brass Male Terminals Female","imgUrl":"https:\/\/img.chinax.com\/nimg\/c6\/54\/f5d1678531ac436480a0438d22cc-200x200-1\/2_0mm_pitch_wire_to_wire_connector_with_tinned_brass_male_terminals_female_contact.jpg","attrs":{"Brand Name":"HRT","Model Number":"C2003 series terminals","Certification":"ISO9001\/ ISO14001\/UL\/RoHS\/REACH","Place of Origin":"Dongguan, China(mainland)"}}
{"title":"Wire To Wire Connector Terminals Crimp Terminals With Tinned Phosphor Bronze","imgUrl":"https:\/\/img.chinax.com\/nimg\/cd\/f0\/6f85c983060df58f5e8b30bc3db2-200x200-1\/wire_to_wire_connector_terminals_crimp_terminals_with_tinned_phosphor_bronze_contact.jpg","attrs":{"Brand Name":"HRT","Model Number":"C3030 series terminals","Certification":"ISO9001\/ ISO14001\/UL\/RoHS\/REACH","Place of Origin":"Dongguan, China(mainland)"}}
Pitch 1.25mm Tin-plated or Gold- flash wire connector terminal
Category: Crimp Terminals Series:A1253-TPEor A1253-GPE Application:Signal Material :Phosphor Bronze Finish:Tin-plated or Gold-flash Packaging Type: Reel Termination Interface Style: Crimp or Compression Wire Insulation Diameter:1.00mm(max)
Electrical & Mechanical information: Current Rating: 1A AC, DC Voltage Rating: 150V AC, DC Contact Resistance: 30mΩ Max Insulation Resistance:500MΩ Min Withstanding Voltage: 500V AC/minute
Temperature range: -25℃ to 85 ℃
Ordering Information:
Part No.
Wire Range
Insulation O.D.
Material
Finish
Qty/reel
A1252-TPE
AWG26#-32#
1.00mm(Max)
Phosphor Bronze
Tin-plated
15Kpcs/reel
A1252-GPE
Gold-flash
Note:
E-stamping before tin-plated or Gold-flash
Drawing & testing report:
Please kindly check the following information to order right products.
1. Scope
This specification covers the requirements for product performance of 2.00mm pitch wire to board
connectors series.
2. Construction,Dimensions,Material & Plating
See the attached drawings
3. Ratings & Applicable Wires
Item
Standard
Rated Voltage (Max.)
100V AC/DC
Insulation O.D. 1.50mm (Max.)
Rated Current (Max.) And Applicable Wires
AWG#24
2.0A AC/DC
AWG#26
1.5A AC/DC
AWG#28
1.0A AC/DC
AWG#30
0.5A AC/DC
Ambient Temperature Range
-25℃ ~ +85℃*
*: Including terminal temperature rise
4. Electrical Performance
Test Description
Procedure
Requirement
4-1
Contact Resistance
Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4)
10mΩ (Max.)
4-2
Insulation Resistance
Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B)
1000MΩ (Min.)
4-3
Dielectric Withstanding Voltage
Mate connectors, apply 800V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301)
No Breakdown.
4-4
Contact Resistance on Crimped Portion
Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA.
5mΩ (Max.)
5. Mechanical Performance
Test Description
Procedure
Requirement
5-1
Actuator Insertion & Withdrawal Force
Insert and withdraw connectors at the speed rate of 25±3mm / minute.
Refer to paragraph 7-2
5-2
Crimping Pull Out Force
Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)
AWG#24
3.0kgf (Min)
AWG#26
2.0kgf (Min)
AWG#28
1.0kgf (Min)
AWG#30
0.8kgf (Min)
5-3
Terminal Insertion Force.
Insert the crimped terminal into the housing.
1.00kgf (Max.)
5-4
Terminal/Housing Retention Force.
Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.
1.50kgf (Min.)
5-5
Pin Retention Force
Apply axial push force at the speed rate of 25±3mm / minute
1.00kgf (Min.)
5-6
Durability
When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.
Contact Resistance 20mΩ (Max.)
5-7
Vibration
Amplitude: 1.5mm P-P
Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.
(Based upon MIL-STD-202 Method 201A)
Appearance No Damage.
Contact Resistance 20mΩ (Max.)
Discontinuity 1 μsec.(Max.)
5-8
Physical Shock
490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)
6. Environmental Performance And Others
Test Description
Procedure
Requirement
6-1
Temperature Rise
Carrying rated current load.(Based upon UL 498)
30℃(Max.)
6-2
Heat Resistance
85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)
Appearance No Damage.
Contact Resistance 20mΩ (Max.)
6-3
Cold Resistance
-25±3℃,96 hours (Based upon JIS C0020)
6-4
Humidity
Temperature: 40±2℃
Relative Humidity : 90~95%
Duration: 96 hours
(Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)
Appearance No Damage.
Contact Resistance 20mΩ (Max.)
Insulation Resistance 100MΩ (Min.)
Dielectric Withstanding Voltage Must meet 4-3
6-5
Temperature Cycling
5 cycles of:
a) -55℃ 30 minutes
b) +85℃ 30 minutes
(Based upon JIS C0025)
Appearance No Damage.
Contact Resistance 20mΩ (Max.)
6-6
Salt Spray
Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101D Cond. B)
6-7
SO2 Gas
24 hours exposure to 50±5ppm.
SO2 gas at 40±2℃.
6-8
NH3 Gas
40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.
6-9
Solderability
Soldering Time: 5±0.5 sec.
Solder Temperature: 245±5℃
Solder Wetting 95% of immersed area must show no voids, pin holes
6-10
Resistance to Soldering Heat
(DIP)
Solder pot method
Soldering time: 10±0.5 sec.
Solder Temperature: 260±5℃
Solder iron method
Soldering Time: 5±0.5 sec.
Solder Temperature: 370℃ ~ 400℃
Appearance No Damage.
6-11
Resistance to Soldering Heat (SMT)
When reflowing
Refer to paragraph 8
Solder iron method
Soldering Time: 5±0.5 sec.
Solder Temperature: 370℃ ~ 400℃
Appearance No Damage.
7. Crimp Specifications & Actuator Insertion/Withdrawal Force
7-1 Terminals with height, suggestion pressure width and wire and terminal's retention
Wire Diameter
Numbers
Conductor Parts(Core Wire)mm
Insulation Parts(PVC)mm
Width
Height
Width
Height
AWG#24
A2001
1.20±0.10
0.75±0.05
1.60(Max.)
2.00(Max.)REF.
AWG#26
0.70±0.05
AWG#28
0.65±0.05
AWG#30
0.60±0.05
7-2 [Unit : kgf]
Circuits
At Initial
Circuits
At Initial
Insertion (Max.)
Withdrawal (Min.)
Insertion (Max.)
Withdrawal (Min.)
Single
0.70
0.10
10
6.50
1.60
02
2.50
0.80
11
7.00
1.60
03
3.00
0.80
12
7.50
1.80
04
3.50
1.00
13
8.00
2.00
05
4.00
1.00
14
8.00
2.00
06
4.50
1.20
15
8.00
2.00
07
5.00
1.20
16
8.50
2.20
08
5.50
1.40
17
8.50
2.20
09
6.00
1.40
18
8.50
2.20
Company Details
Bronze Gleitlager
,
Bronze Sleeve Bushings
and
Graphite Plugged Bushings
from Quality China Factory
Business Type:
Manufacturer,Exporter
Year Established:
2004
Total Annual:
20,000,000-24,999,999
Employee Number:
100~149
Ecer Certification：
Active Member
12-year Experience of Manufacturing Connectors
Established in 2004, Xinpei is your reliable supplier for most of connectors. Our products are widely trusted by reputable and famouse manufacturers of household appliances, computer peripherals, medical equipment, locomotives, telecommunication device... 12-year Experience of Manufacturing Connectors
Established in 2004, Xinpei is your reliable supplier for most of connectors. Our products are widely trusted by reputable and famouse manufacturers of household appliances, computer peripherals, medical equipment, locomotives, telecommunication device...
