12 Fibers MTP Female To MTP Female Patch Cord Singlemode 3.0mm LSZH

Product Specification

Connectors’ Industrial Standard

MPO Singlemode Reference: EIA/TIA-604-5

MPO Singlemode Housing Details: SM APC: Green connectors+black boot (Standard Loss MTP)
SM APC: Yellow connectors+black boot (Super low loss MTP)

MPO Multimode Reference: EIA/TIA-604-5

MPO Multimode Housing Details: OM1&OM2 PC: Beige connectors+black boot (Standard Loss MTP)
OM3&OM4 PC: Aqua connectors+black boot (Standard&Super low loss MTP)
OM3&OM4 PC: Heather Violet connectors+black boot (Standard loss MTP)

• Meets IEC Standard IEC-61754-7; IEC61755, Telcordia GR-1435-CORE, JIS C5982; TIA-604-5(FOCIS5) compliant Structured cabling per TIA-568-C
• 10G Fiber Channel Compliant
• 40G and 100G IEEE 802.3

Optical Specifications

Insertion Loss (MPO)(IEC 61300-3-34)Singlemode (APC 8-degree polished): Standard loss:≤0.75dB(max), ≤0.50dB(Typical);Super Low loss:≤0.35dB(max), ≤0.20dB(Typical)

Insertion Loss(MPO)(IEC 61300-3-34) Multimode (PC Flat polish): Standard loss:≤0.6dB(max), ≤0.50(Typical);Super Low loss:≤0.35dB(max) , ≤0.20dB(Typical)

Insertion loss(LC/SC/FC/ST)(IEC 61300-3-6)Single mode (APC 8-degree polished): ≤0.3dB

Insertion loss(LC/SC/FC/ST)(IEC 61300-3-6)Multimode (PC Flat polish): ≤0.3dB

Return Loss (MPO) Singlemode (APC 8-degree polished): ≥60dB(8degree polishing)

Return Loss (MPO) Multimode (PC Flat polish): ≥25dB

Return loss(LC/SC/FC/ST): APC≥60dB; UPC≥50dB

Return loss(LC/SC/FC/ST): ≥35dB

Durability: <0.3dB typical change (200 matings)

Interchangeability​: ≤0.2dB

Insert-pull Test: 500times, IL＜0.5dB

Tensile strength: >70N

Plug -in times:>600

Operating Temperature Singlemode (APC): -40°C to +85°C

Features

• Low insertion loss, high return loss
• MT based Multi-fiber Connector, 4,8,12 and 24 fiber connector terminations and assemblies
• Economical solution for mass-termination of fiber
• Designed for low loss and standard loss SM and MM applications
• Ruggedized round cable, oval cable and bare ribbon options available
• Color coded housings available to differentiate fiber type, polish type and/or connector grade
• Good in repeatability and exchangeability

Application

12F MPO- LC/SC/FC/ST Straight harness Cables designed for 40G LR4 PSM, 40GBASE-SR4, 40G QSFP+ PLR4 and highdensity data center. It is optimized for 10/40/100G high-density data center applications.
All of OMC’s MPO Connectors are from Senko/Nissin/Sumitomo. MPO Fiber Patch Cord is a kind of high density cable assemblies which is generally use in three areas.

• The Data Center application with high dense degree environment
• The optical fiber to the building
• The internal connector application in fiber equipment.

Naming Rules&Order Confirmation Information:

Push Pull Tab For Senko MTP

MTP-MTP 12F Trunk cable drawing.

Three Connection Methods Help Keep the Right MTP/MTP Polarity

1. Polarity A connection

Polarity A MTP cables use a key up, key down design. Therefore, as shown in the figure below, the position 1 of one
connector is corresponding to the position 1 of another connector. There is no polarity flip. Therefore, when we use polarity A MTP cable for connection, we must use A-B duplex patch cables on one end and A-A duplex patch cables on the other end. Since in this link, Rx1 must connect to Tx1. If we don’t use A-A duplex patch cable, according to the design principle of polarity A MTP cable, fiber 1 may transmit to fiber 1, that is to say Rx1 may transmit to Rx1, which may cause errors.

2. Polarity B connection

Polarity B MTP cables use a key up, key up design. Therefore, as shown in the figure below, the position 1 of one connector is corresponding to the position 12 of another connector. Therefore, when we use polarity B MTP cable for connection, we should use a A-B duplex patch cables on both ends. Since the key up to key up design help to flip the polarity, which makes fiber 1 transmit to fiber 12, that is the Rx1 transmits to Tx1.

3. Polarity C connection

Like the polarity A MTP cables, polarity C MTP cables also use a key up, key down design. However, within in the cable, there is a fiber cross design, which makes the position 1 of one connector is corresponding to the position 2 of
another connector. As shown in the figure below, when we use polarity C MTP cable for connection, we should use a A-B duplex patch cables on both ends. Since the cross fiber design help to flip the polarity, which makes fiber 1 transmit to fiber 2, that is the Rx1 transmits to Tx1.

Note: The Polarity type is in the following naming rules-Polarity A；Polarity B；Polarity C

Zion Communication's Hot TRUNK CABLE

Packaging

This easily taken and well-protected fiber optical cable package has been labelled and marked by OMC as default .

Standard carton size : 34*22*15 cm; 44*34*24 cm ; 54*39*34 cm . Which carton to be used depends on goods Qty .

Packing can be customized.

OEM/ODM service for you

• Cable color, printing word, material of cable jacket, connector’s color
• OEM Label, Identify ring, cable’s label,box, shipping marks
• Different quality Level.

	MPO Female To MPO Female SM 3.0mm LSZH 12 Fibers MPO Patch Cord Custom Meters	MPO-MTP Patch Cord, MTP/MPO, Optical Components, Optical Networking
	MPO Female To MPO Female SM 3.0mm LSZH 24 Fibers MPO Patch Cord Custom Meters	MPO-MTP Patch Cord, MTP/MPO, Optical Components, Optical Networking
	MPO Female To MPO Female OM3 3.0mm LSZH 12 Fibers MPO Patch Cord Custom Meters	MPO-MTP Patch Cord, MTP/MPO, Optical Components, Optical Networking
	MPO Female To MPO Female OM3 3.0mm LSZH 24 Fibers MPO Patch Cord Custom Meters	MPO-MTP Patch Cord, MTP/MPO, Optical Components, Optical Networking
	MPO Female To MPO Female OM4 3.0mm LSZH 12 Fibers MPO Patch Cord Custom Meters	MPO-MTP Patch Cord, MTP/MPO, Optical Components, Optical Networking
	MPO Female To MPO Female OM4 3.0mm LSZH 24 Fibers MPO Patch Cord Custom Meters	MPO-MTP Patch Cord, MTP/MPO, Optical Components, Optical Networking
	MTP Female To MTP Female SM 3.0mm LSZH 12 Fibers MTP Patch Cord Custom Meters	MPO-MTP Patch Cord, MTP/MPO, Optical Components, Optical Networking
	MTP Female To MTP Female SM 3.0mm LSZH 24 Fibers MTP Patch Cord Custom Meters	MPO-MTP Patch Cord, MTP/MPO, Optical Components, Optical Networking
	MTP Female To MTP Female OM3 3.0mm LSZH 12 Fibers MTP Patch Cord Custom Meters	MPO-MTP Patch Cord, MTP/MPO, Optical Components, Optical Networking
	MTP Female To MTP Female OM3 3.0mm LSZH 24 Fibers MTP Patch Cord Custom Meters	MPO-MTP Patch Cord, MTP/MPO, Optical Components, Optical Networking