HENAN DASION MACHINERY CO.,LTD
| Payment Terms | T/T, L/C, Paypal |
| Supply Ability | 1000 sets per month |
| Delivery Time | 7-10 working days |
| Packaging Details | Neutral factory box |
| Product name | Automatic 6-12mm rebar cutter and steel bar hydraulic straightening machine |
| Motor power | 7.5kw |
| Straightening wheel | Cr12 |
| Class III reba | ≤10mm |
| Dimension | 160x66x95cm |
| Clip | Cast steel |
| Bearing | Reben |
| Weight | 262kg |
| Brand Name | DASION |
| Model Number | YGT4-12 |
| Certification | CE&ISO |
| Place of Origin | Henan Province, China |
View Detail Information
Explore similar products
Automatic Hydraulic Flat Steel Rebar Straightening Cutting Machine 160x66x95cm
YGT4-12 Steel Bar Straightening Machine 7.5kw With Simple Hydraulic System
Steel Wire Rebar Straightener Machine Cast Steel Clip With PLC Control System
262kg Weight Flat Steel Rebar Straightening Machine High Performance
Product Specification
| Payment Terms | T/T, L/C, Paypal | Supply Ability | 1000 sets per month |
| Delivery Time | 7-10 working days | Packaging Details | Neutral factory box |
| Product name | Automatic 6-12mm rebar cutter and steel bar hydraulic straightening machine | Motor power | 7.5kw |
| Straightening wheel | Cr12 | Class III reba | ≤10mm |
| Dimension | 160x66x95cm | Clip | Cast steel |
| Bearing | Reben | Weight | 262kg |
| Brand Name | DASION | Model Number | YGT4-12 |
| Certification | CE&ISO | Place of Origin | Henan Province, China |
| High Light | steel bar straightening machine ，rebar straightening cutting machine | ||
Well and High Quality Control.
Prompt Delivery.
Customer's Design and Logo are Welcome.
Competitive Prices.
Fit for Gifts and Premiums.
Earth-friendly Products.
Small Order Acceptable.
Reinforced straightening cutting machine is a carefully developed a new generation of high-tech products for many years, with high efficiency, energy saving, material saving, section, and other significant features of reasonable structure, in the domestic leading level.
1. the configuration of the world's most advanced delixi electric control system, overload, underload, lack of phase, short circuit, overheat protection, comprehensive scale counts, start, stop, full automation, the machine in length, output after boot, make can automatically complete straightening shear, counting and other working procedures, automatic stop after finish production, one person operation, can save the workers' wages in a greater degree.
2. Cut off the hydraulic servo cutting technology, not only save a large amount of loss of tools, and fundamentally eliminate the phenomenon of even cutting and cutting continuously, without reinforcement and a short break, and accurate cut-off, zero waste, material left powerusageeffectiveness by general adjusting cutter of 98% to 98%, that alone, you can save an annual output of 1000 tons of steel manufacturer 2-30000 yuan, while working noise is extremely low, accord with environmental protection requirement.
3. Straightening roller, the introduction of Germany's high-tech balance technology production series straightening machine (domestic only will this technology is used for straightening machine production), micro balance reached 99%, the straightening roll drum rotating speed is generally 2-3 times that of the straightening machine, speed of 50 meters per minute, is straightening machine as well as a power of 2 to 3 times, output can reach more than 10 tons, and the machine work with low noise, small vibration, can not break machine work day after day
4. Process: the hyperbolic straightening roller structure, ensure the machine on straight cold rolled ribbed steel bar, can ensure maximum wire surface geometry and mechanical properties, does not damage of rib, straightening range is wide, but straightening ￠4 mm, 12 mm wire, cold drawing mild steel wire, high strength steel, cold rolled ribbed steel bar, etc.
5. Straightening effect: the straightening effect is good, the rebar straightening is high, and every meter is less than 2mm, and there is no abrasion on the surface
| Item | Rebar Straightening Machine | Parameters |
| 1 | YGT4-10 | Class III rebar≤φ8mm Motor power: 4kw Speed:38m/min Weight:208kg Dimension:130*65*85cm |
| 2 | YGT4-12 | Class III rebar≤φ10mm Motor Power: 7.5kw Speed: 46m/min Straightening wheel: Cr12 Bearing: Renben. Clip: Cast steel Weight:262kg Dimension:160*66*95cm |
| 3 | YGT4-14B | Class III rebar≤φ10mm Straightening box: 700mm Motor Power: 7.5KW Weight: 336kg Dimension: 175*70*96cm |
| 4 | YGT4-14AB | Class III rebar≤φ12mm Motor Power: 9KW Low Speed: 35m/min High Speed: 45m/min Straightening wheel: Cr12 Bearing: Renben Weight: 480kg Dimension:210*80*110cm Disk adjustment |
| 5 | YGT4-14A | Class III rebar≤φ12mm Straighten Motor Power: 11KW Cutting Motor Power: 7.5kw Low Speed: 45m/min High Speed: 60m/min Straightening wheel: Cr12 Bearing: Renben Weight: 800kg Dimension:250*80*116cm Disk adjustment |
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2010
Total Annual:
10 Million-50 Million
Employee Number:
10~20
Ecer Certification：
Active Member
HENAN DASION MACHINERY CO., LTD is a professional manufacturer of concrete equipment, located in China "Central Plains Core" - Zhengzhou City. It was founded in 2010, covering manufacturing area of 335,000m2. Our main products include: concrete mixers, concrete batching plants, concrete ... HENAN DASION MACHINERY CO., LTD is a professional manufacturer of concrete equipment, located in China "Central Plains Core" - Zhengzhou City. It was founded in 2010, covering manufacturing area of 335,000m2. Our main products include: concrete mixers, concrete batching plants, concrete ...
Get in touch with us
Leave a Message, we will call you back quickly!