High Strength Antibacterial Silicone Building Sealant Waterproofing

Product Specification

structural Silicone Sealant Neutral Cure Silicone Sealant for door and window with black,white and grey

SIWAY

SV - 995 neutral silicone sealant structure is a kind of one-component, construction
curtain wall structure of room temperature curing glue, can be used in all kinds of
curtain wall joints and waterproof seal, also can be used for all kinds of aluminum
alloy, glass doors and Windows seal assembly

FEATURES
1. 100% silicone
2.  Easy to use
3.  Waterproofing and weatherproofing
4.  Fast curing speed, high strength
5.  12.5% movement capability

COLOURS
SV995 is available in black, gray, white and other customized colours.

PACKAGING
300ml in cartridge * 24 per box, 590ml in sausage *20 per box

BASIC USES
1. Curtain wall joints and waterproof seal
2. Aluminum alloy, glass doors and Windows seal assembly

TYPICAL PROPERTIES
These values are not intended for use in preparing specifications
Test standard Test project Unit value
Before curing——25℃,50%R.H.
ASTM C 679 Flow, sagging or vertical flow mm 0
VOC g/L ＜80
GB13477 surface drying time(25℃,50%R.H.) min 30
Curing time(25℃,50%R.H.) Day 7-14
Sealant curing speed and operating time will have different with different temperatures
and temperature, high temperature and high humidity can make sealant curing speed
faster, rather low temperature and low humidity are slower.
21 days after curing——25℃,50%R.H.
GB13477 Durometer Hardness Shore A 30
GB13477 The ultimate tensile strength Mpa 0.7
Temperature stability ℃ -50~+150
GB13477 Movement capability % 25
ASTM C 1248 Pollution / oil, natural structural No

CURE TIME
As exposed to air, SV995 begins to cure inward from surface. Its tack free time is about 50
minutes; the full and optimal adhesion depends on the sealant depth.

SPECIFICATIONS
SV995 is designed to meet or even exceed the requirements of:
 Chinese national specification GB/T 14683-2003 20HM

STORAGE AND SHELF LIFE
GB557 should be stored at or below 27℃ in original unopened containers. It has a shelf life of
12 months from the date of manufacture.

LIMITATIONS
SV995 should not be applied:
 For structural glazing
 For weather seal for curtain walls
 To underground joints
 To joints with high movement
 To the materials that bleed oils , plasticizers or solvents, such as impregnated wood ,or
unvulcanized resin
 In totally confined spaces as sealant requires atmospheric moisture for cure
 To frost laden or damp surfaces
 For continuous water immersion
 When surface temperature below 4℃ or over 50℃

HOW TO USE
Surface Preparation
Clean all joints removing all foreign matter and contaminants such as oil, grease, dust, water, frost,
old sealants, surface dirt, or glazing compounds and protective coatings.

Application Method
Mask areas adjacent to joints to ensure neat sealant lines. Apply SV995 in a continuous operation
using dispensing guns. Before a skin forms, tool the sealant with light pressure to spread the
sealant against the
joint surfaces. Remove masking tape as soon as the bead is tooled.

TECHNICAL SERVICES
Complete technical information and literature, adhesion testing, and compatibility testing are
available from Guibao.

SAFETY INFORMATION
 SV995 is a chemical product, not edible, no implantation into body and should be kept
away from children.
 Cured silicone rubber can be handled without any risk to health.
 Should uncured silicone sealant contact with eyes, rinse thoroughly with water and seek
medical treatment if irritation persists.
 Avoid prolonged exposure of skin to uncured silicone sealant.
 Good ventilation is necessary for work and cure places.

DISCLAIMER
The information presented herein is offered in good faith and is believed to be accurate. However,
because conditions and methods of using our products are beyond our control, this information
should not be used in substitution for customer’s tests to ensure that our products are safe,
effective, and fully satisfactory for specific applications.

Technical data sheet