Ningbo youte electric Co.,LTD
| Payment Terms | T/T, Western Union, MoneyGram,Paypal |
| Supply Ability | 5000-1000pcs/month |
| Delivery Time | 3-20 working days depending on the quantity |
| Packaging Details | Box+carton, 25SETS/Carton, 14kg/carton, carton size: 45x34x36.5cm |
| Material | Stainless steel |
| Rated Load | Any weight |
| Voltage: | DC19-29V |
| Cable length: | 3m, 4 blank wire |
| Installation location | ifts' crosshead beam /frame structure |
| Display mode | Weight/percentage |
| Structure | Split type |
| Alarm relay output | 5(overload,full load,empty load, optical,acousti |
| Brand Name | SUMT, ANT |
| Model Number | OMS-560-RHP-E-3T |
| Place of Origin | NINGBO CITY, CHINA |
View Detail Information
Explore similar products
WDS-MR100 Elevator Load Weighing Device Elevator Overload Measurement System
SUMMIT Elevator Load Measuring System 3000kg RHP-F-OMS-560 Overload Measurement
SUMMIT WDS-MR200 Elevator Load Weighing Device 8-16mm Wire Tension Measuring
WDS-MR300 Elevator Overload Measurement System 5000kg Rope Tension Overload
Product Specification
| Payment Terms | T/T, Western Union, MoneyGram,Paypal | Supply Ability | 5000-1000pcs/month |
| Delivery Time | 3-20 working days depending on the quantity | Packaging Details | Box+carton, 25SETS/Carton, 14kg/carton, carton size: 45x34x36.5cm |
| Material | Stainless steel | Rated Load | Any weight |
| Voltage: | DC19-29V | Cable length: | 3m, 4 blank wire |
| Installation location | ifts' crosshead beam /frame structure | Display mode | Weight/percentage |
| Structure | Split type | Alarm relay output | 5(overload,full load,empty load, optical,acousti |
| Brand Name | SUMT, ANT | Model Number | OMS-560-RHP-E-3T |
| Place of Origin | NINGBO CITY, CHINA | ||
| High Light | Split Type Elevator Load Weighing Device ，Elevator Load Weighing Device RHP-X-OMS-560 ，RHP-X-OMS-560 Elevator Load Weigher | ||
SUMMIT Split type elevator load measuring system RHP-X-OMS-560 mounting on car frame crosshead beam strain link tesion load weighing device
Installation loacation: Between wire rope hitch plates:OMS-560-RHP-X
Description:
The load weighing system consists of one crossbeam sensor RHP-X and a weighing control unit OMS-560, and the sensors RHP-X is mounted to load bearing members of the car or shaft assembly that are stressed with bending loads during operation.
The bending is recorded by the crossbeam sensor and sent to the control unit OMS-560 for evaluation, and we have a range of weighing control units(OMS-820, OMS-520, OMS-370C and so on), which is matched with the beam sensor RHP-X.
Features:
| Control Unit:OMS-560 | |||
| Operation Voltage | AC/DC16-48V | Sensor operation voltage | DC5V |
| Nominal power | 4W | Signal Hold Voltage | AC/DC12-45V |
| Input Channel (Load Cell ) | 2 | Measuring precision | 0.1% |
| Relay Number | 5(overload,full,half empty,optical, audio output) | Operation temperature | -45degree-+85degree |
| Contact Load | 8A250VAC,5A 250VAC,5A 30VDC | Size | 90x84x58mm |
| Display Type | 4 digits 0.56 inch LED | Weight | 265g |
| Display mode | Weight/percentage | Shell material | ABS |
| Model: | RHP-X | ||
| Rated Load | Undefined, works with bending steel frame | Output Resistance | 352M+/-2 ohm |
| Rated Output | 2.0+-0.02%mv/v | Connection type | 4 blank wire |
| Total error | +/-0.5% F.S | Input Resistance | 380+/-10 ohm |
| Repeatability | +/-0.5% F.S. | Construction material | Stainless Alloy steel |
| Creep 30min | +/-0.05% F.S/30min | Protection Class | IP68 |
| Zero Balance | +/-1% F.S. | Insulation impedance | ≥5000Ω |
| T C SPAN | +/-0.02% F.S./10 degree Celsius | Cable length | 3m(blank) |
| Operation temperature range | -30 to 70 degree Celsius | Excitation | DC 5-12V |
Wiring Diagram:
4-core blank wire :
Installation location&Size:
Instruction:
The purpose of the SUMMIT Load Weighing system is to measure the load in the elevator and pro-vide usable information about the load to the elevator controller. This information is used forpre-torquing and for dispatching decisions, e.g. light load anti-nuisance, heavy load and over-load.
The system usually consists of a sensor or group of sensors mounted on the elevator’s some position such as clamping on wire rope, or under cabin, under the wire rope plate installation and a control unit. The sensor(s) provide a signal to the control unit directly related to the amount of load in the cab. The load weighing control accepts this signal and provides usable data to the elevator controller in the form of an analog signal and discrete relay contacts.
Company Details
Business Type:
Manufacturer,Importer,Exporter,Seller
Year Established:
1996
Total Annual:
15000000-20000000
Employee Number:
150~200
Ecer Certification：
Verified Supplier
About US: CBR Electric Group is a leading international high technology company and specialize in the elevator, lifting industry, and automatic process control more than 20 years, and we have built a global reputation for providing high-quality, innovative components essential to effective elevat... About US: CBR Electric Group is a leading international high technology company and specialize in the elevator, lifting industry, and automatic process control more than 20 years, and we have built a global reputation for providing high-quality, innovative components essential to effective elevat...
Get in touch with us
Leave a Message, we will call you back quickly!