Used 100T Crawler Crane 110m/Min Hoisting Speed For Synergy In Offshore

Product Specification

100T Crawler Crane That Can Be Used For Synergy In Offshore Engineering

XGC100A Crawler Crane Technical Specifications

Crawler crane models: XGC100A
Max rated lifting capacity: 100t/4m
Max rated lifting moment: 425 t.m
The longest combination of main boom working conditions: 61 m
The longest combination of single pulley working condition at the main boom end: Boom 61 m+Single pulley at arm end 1.1 m
The longest combination of fixed jib working conditions: Boom 52 m +fixed jib 19 m
Max transportation weight per piece: 24.1t
Max transport width per piece: 3.4m
Max transport height per piece: 3.04m

Product component and system description

Safety measures

Boom Angle Limitation

When the main boom reaches the specified angle, the lifting is stopped and controlled by the torque limiter and the travel switch; when the elevation angle of the main boom is less than the specified angle, the falling is stopped and controlled by the torque limiter and an audible alarm is issued.

Lifting hook anti-drop

All lifting hooks are equipped with anti-drop plates to prevent the slings hanging on the hook heads from falling off.

Hydraulic system

Equipped with hydraulic balance valve, hydraulic overflow valve and other devices to ensure the system is stable and safe during operation.

Torque limiter system

Detection function: The torque limiter can automatically detect the angle of the crane arm and the lifting load.

Display function: Large color 7.0-inch LCD display. Display the lifting operation parameters such as torque percentage, actual lifting weight, rated lifting weight, working radius, boom length, angle, maximum lifting height, working condition code, ratio, limit angle, information code, etc. in Chinese (or English) and graphics.

Warning function: It has complete pre-alarm and overload stop operation functions. If the actual load is detected to exceed the rated load and the crane arm exceeds the limit angle, the torque limiter will sound an alarm and limit the current action.

The system has a fault self-diagnosis function.

Three-color torque warning light

The three-color torque alarm light consists of three colors. When the torque percentage is below 90%, the "green light" is on, indicating that the crane is operating in a safe area; when the torque percentage is between 90% and 100%, the "yellow light" is on, indicating that the crane is close to the rated load range. When the torque percentage is higher than 100%, the "red light" is on, indicating that the crane is overloaded and in a dangerous area. The control system automatically cuts off the crane's movement in the dangerous direction.

Sound and light alarm

When the crane is moving or rotating, the sound and light alarm lights can flash and sound to alarm.

Lighting

Lighting lamps are installed in front of the turntable, above the control room and inside the control room to provide lighting for night work.

rearview mirror

Located outside the control room, it is convenient for the driver to observe the situation behind the machine.

Height indicator light

The height indicator light is installed on the top of the boom as a high-altitude warning.

Anemometer

The current wind speed is detected in real time and transmitted to the monitor in the control room to remind the operator to pay attention to the real-time wind speed to ensure that the crane operates within the safe wind speed.

Level

Equipped with a bubble level, it can display the inclination of the road surface and provide the operator with a reference for the machine's levelness.