Shenzhen Creatall Electronics Co., Ltd.
| Supply Ability | 1000 Piece/Pieces per Day |
| Delivery Time | 5-8 work days |
| Product Model | CA-2S-20A |
| Charging voltage | 8.4V - 9.0V |
| Continuous discharge current (upper limit) | 20A |
| Continuous charge current (upper limit) | 10A |
| Product Size | 45*15*3.4mm (Standard), 48*20*3.4mm (Balancing) |
| Brand Name | Creatall |
| Model Number | CA-2S-20A |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
3S 4S 25A 40A 60A BMS Battery Protection Board Li Ion Battery Charging Board
10A 8.4V 18650 2s Bms Board power supply module 46.7 * 23 * 3.15mm
Creatall PCB PCM 4S 20A Bms Charging Board Dc Dc Converter
5S 18.5V BMS Battery Protection Board Battery Charging Protection Board 21V
Product Specification
| Supply Ability | 1000 Piece/Pieces per Day | Delivery Time | 5-8 work days |
| Product Model | CA-2S-20A | Charging voltage | 8.4V - 9.0V |
| Continuous discharge current (upper limit) | 20A | Continuous charge current (upper limit) | 10A |
| Product Size | 45*15*3.4mm (Standard), 48*20*3.4mm (Balancing) | Brand Name | Creatall |
| Model Number | CA-2S-20A | Place of Origin | Guangdong, China |
| High Light | 20A 18650 Lithium Battery Protection Board ，Standard Diy Bms For 18650 ，Balance Diy Bms For 18650 | ||
Report Item
Applicable scope: Suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, without limitation on the dimensions)
Product Size: 45*15*3.4mm (Standard), 48*20*3.4mm (Balancing)
Charging voltage: 8.4V - 9.0V
Continuous discharge current (upper limit): 20A (If the cooling environment is not good, reduce the load current use)
Continuous charge current (upper limit): 10A
Standard Edition: Suitable for starting drills with currents up to 25A below 50W, or resistive loads below 168W.
Balanced version: Suitable for starting currents below 25A and below 50W power drills, or resistive loads below 168W, with balanced charging function.
Note 1: The successful start of power drill requires two 10C-20C power batteries, or four 5C-10C power batteries (ordinary 18650 can not start drill! ! !); 0V and 8.4V cable, use 2 square mm Above copper wire (cannot use nickel plate!!!)
Note 2: Connect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it needs to be charged before output.
Note 3: When the battery is charged, “430” resistance heating is a normal phenomenon, indicating that the equalizing circuit is working; if the “430” resistance is also heating in the state of not charging, please check whether the wrong line is connected. For some customers with poor electronic foundation, please explain: Do not mix good batteries and bad batteries together! The capacity/internal resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = 2 battery use effect).
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2004
Total Annual:
2000000-7200000
Employee Number:
150~200
Ecer Certification：
Verified Supplier
Shenzhen Creatall Electronics Co.,Ltd was founded in 2004,is a leading manufacturer and supplier of various modules, specializing in led tv parts ,speaker parts , power supply parts etc related electronics SKD products other related PCB&PCBA products. We have a dedicated team of experienced... Shenzhen Creatall Electronics Co.,Ltd was founded in 2004,is a leading manufacturer and supplier of various modules, specializing in led tv parts ,speaker parts , power supply parts etc related electronics SKD products other related PCB&PCBA products. We have a dedicated team of experienced...
Get in touch with us
Leave a Message, we will call you back quickly!