Powerful Pulse Jet Bag Filter For Calcium Carbide Furnace / Cement Plant

Product Specification

High efficiency pulse bag filter BH industrial dust collector

Description:

    The pulse dust collector is a new high-efficiency pulse dust collector improved on the basis of bag filter. It combines the advantages of sub-chamber back-blowing various pulse jet dust collectors, and overcomes the shortcomings of insufficient chamber dust-removing strength and uneven distribution of inlet and outlet winds. Expanded the scope of application.
    The pulse dust collector is when the dust-containing gas enters the dust collector from the air inlet, first hits the sloping plate and the baffle in the middle of the air inlet and outlet, the air flow turns into the ash hopper, and the air flow speed is slowed down, and the coarse particles in the gas are caused by the inertia. The dust flows directly into the ash bucket. As a function of pre-collection, the airflow entering the ash bucket is then folded upwards and collected through the filter bag dust containing the metal skeleton inside, and is collected on the outer surface of the filter bag, and the purified gas enters the upper cleaning chamber of the filter bag chamber, and is collected. When the tuyere is discharged and the dust-containing gas is purified through the filter bag, the dust accumulated on the filter bag increases with time, increasing the resistance of the filter bag, causing the treatment air volume to gradually decrease, for normal work, to be controlled. The resistance is within a certain range (140--170 mm water column). Once the range is exceeded, the filter bag must be cleaned. When the dust is cleaned, the pulse control device sequentially triggers each control valve to open the pulse valve. The compressed air in the air bag is blown by the blowing pipe. Each hole is sprayed into each corresponding filter bag through the venturi tube, and the filter bag is suddenly expanded rapidly, so that the dust accumulated on the surface of the filter bag is detached, and the filter bag is restored to its original shape. The dust falls into the ash bucket and is discharged through the ash discharge system. Thereby, the dust accumulated on the filter bag is periodically pulsed and cleaned, so that the purge gas passes normally, and the dust removal system is operated.

Parameter:

Working principle:

Application:

    The pulse dust collector adopts the off-line off-line pulse cleaning technology to overcome the shortcomings of anti-air cleaning and general pulse cleaning. It has strong cleaning ability, high dust removal efficiency, low emission concentration, low air leakage rate and low energy consumption. Less, the operation is reliable and stable. This series of dust collectors is especially suitable for the following occasions: dust removal in calcium carbide furnaces, dust removal in various electric furnaces in iron alloy plants; flue gas purification in steel plants; dust removal in small boilers for coal-fired boilers and power plants; dust removal in waste incinerators; high-temperature flue gas dedusting in smelters; Flue gas purification; cement plant rotary kiln kiln tail, kiln head dust removal; carbon black plant exhaust gas dust removal. Its application area is characterized by high temperature and large smoke volume.

Trouble shooting method:

Work site: