Mianyang Prochema Commercial Co.,Ltd.
| Place of Origin | Sichuan,China |
View Detail Information
Explore similar products
V0 fire retardant TPEE resin
High performance TPEE granule
Blow molding grade TPEE for shock absorber jacket
High performance TPEE resin for auto parts
Product Specification
| Place of Origin | Sichuan,China |
We supply Blow molding grade PTEE resin:
The characteristic indexes of Blow molding grades of SUNPRENE®-TPEE
| Physics Characteristic | Shall Hardness | Tensile Strength | Elongation at Break | Flexural Modulus | Tear Strength | Melting Point | Melt Flow Index | Brittle Point | VICAT | Density | ||||
| Unit | HD | MPa | % | MPa | KN·m-1 | ℃ | g/10min | ℃ | ≥(℃) | (g/cm3) | ||||
| Test methods | ISO868 | ISO527-1 | ISO527-1 | ISO178 | ISO34 | ISO3146 | ISO1133 | ISO974 | ISO1183 | |||||
| Blow molding grades | H3303B | 35 | 18 | 400 | 40 | 100 | 178.1 | 0.5～1.5 | -70 | 95 | 1.12 | |||
| H2040B | 40 | 25 | 400 | 50 | 115 | 179.6 | 0.5～1.5 | -70 | 100 | 1.12 | ||||
| H4543B | 45 | 24 | 380 | 90 | 130 | 185.3 | 0.5～1.5 | -70 | 135 | 1.15 | ||||
| H5550B | 48 | 30 | 360 | 90 | 135 | 191.1 | 0.5～1.5 | -70 | 108 | 1.17 | ||||
| H605B | 55 | 36 | 350 | 156 | 163 | 193.7 | 0.5～1.5 | -70 | 150 | 1.18 | ||||
| H7560B | 63 | 18 | 400 | 40 | 100 | 202.7 | 0.5～1.5 | -70 | 165 | 1.12 | ||||
The above data are typical.
The introduction of Blow molding grades of SUNPRENE®TPEE:
Thermoplastic polyester elastomer TPEE flame-retardant series, with excellent processing performance, high toughness, fatigue resistance, and maintain excellent mechanical properties and flexibility in high or low temperatures. In addition to the series features a high performance level, but also has good melt strength, etc.
The guideline of Blow molding grades of SUNPRENE®TPEE molding processing:
Before the molding process, TPEE must be dried under oven at 100~110 ℃ for 3~5h, and then processed immediately, not to let they cooled and in damp air, or to affect their performance.
Processing technology:
Blow molding:barrel temperature should be higher than the melting point of products 5~15 ℃, mold temperature at 40-70℃.
SUNPRENE®TPEE Blow series typical applications for parts with pictures and grades:
For the production of a variety of jacket and hose, such as: steering sheath, shock absorber jacket, dust cover, traction coupling cover, distance bellows, engine intake duct, clothing lining film, etc.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,TradingCompany,Seller
Year Established:
2004
Total Annual:
$1,000,000-$5,000,000
Employee Number:
>less than 50
Ecer Certification：
Active Member
Everyday new companies open, and companies die. Most died companies was caused by the founders,including his bad management,his short dream and his attitude to the customers... Everyday new companies open, and companies die. Most died companies was caused by the founders,including his bad management,his short dream and his attitude to the customers...
Get in touch with us
Leave a Message, we will call you back quickly!