Mianyang Prochema Commercial Co.,Ltd.
| Place of Origin | China |
| Brand Name | prodhcmea |
View Detail Information
Explore similar products
TEDLAR PVF Gas Sampling Bag
Kynar PVDF Gas Sampling Bag
FLUODE Gas Sampling Bag
FEP Gas Sampling Bag
Product Specification
| Place of Origin | China | Brand Name | prodhcmea |
Detailed Description:
Performance Characteristics:
Outstanding chemical resistance
Extremely low friction
Soft and formable
Good bearing and wear properties
Good weathering resistance
Performs well at elevated temperatures
Specification: Custom sizes and colors available upon request
Application:
Seals and gaskets / Valve and fitting components / Pump parts / Manifolds / Semiconductor equipment / Scientific equipment / Medical equipment / Chemical resistant tubing / Bearings and bushings
PTFE Film Features
Self lubricating
Long durability
Maintenance free
Non-contaminating
High chemical resistance
High temperature resistance
2.PTFE Film Advantages:
-Superior endurance in corrosion
-Superior endurance in seasonal change
-Non-flammable, limited oxygen index is under 90.
-Low friction coefficient
-Non-viscous
-Superior endurance in high&low temperature, can be used -190~260°C.
-High electricity insulation
-High electricity resistance coefficient
-Self-lubricating
-Atmospheric aging resistance
-Radiation-resistant properties and low permeability
3.PTFE Film Applications
Bearings Cell lids Insulators Seal rings Wear rings Valve seats Friction pads
PTFE is available in a variety of formulations including unfilled and filled grades with sheet, rod, tube and bar also bespoke m
Remark: PTFE are available as films with thicknesses of 3mm or less (1m width)
Packing:Carton cases or according to customer’s requirements
Typical Properties:
|
|
UNITS |
ASTM TEST |
PTFE |
|
Tensile strength |
psi |
D-638 |
1,500-3,000 |
|
Flexural modulus |
psi |
D-790 |
72,000 |
|
Izod impact (notched) |
ft-lbs/in of notch |
D-256 |
3.5 |
|
Heat deflection temperature @ 66 psi |
°F |
D-648 |
250 |
|
Maximum continuous service temperature in air |
°F |
|
500 |
|
Water absorption (immersion 24 hours) |
% |
D-570 |
<0.01 |
|
Coefficient of linear thermal expansion |
in/in/°Fx10-5 |
D-696 |
5.5 |
|
Coefficient of friction (dynamic) |
|
|
0.10 |
Size:0.01mm to 2mm Max width 1000mm
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,TradingCompany,Seller
Year Established:
2004
Total Annual:
$1,000,000-$5,000,000
Employee Number:
>less than 50
Ecer Certification：
Active Member
Everyday new companies open, and companies die. Most died companies was caused by the founders,including his bad management,his short dream and his attitude to the customers... Everyday new companies open, and companies die. Most died companies was caused by the founders,including his bad management,his short dream and his attitude to the customers...
Get in touch with us
Leave a Message, we will call you back quickly!