salt spray test chamber

Product Specification

Salt Spray Test Equipment Manufacture

1. Water Refilling System: This salt spray test machine designed with automatic or manual water refilling system in case of water supplement insufficient so as to abort the salt spray test.
2. This salt spray test machine is designed with digital indicating temperature controller and its PID control accuracy up to ±0.1℃.
3. Dual Over-Temperature Protective System as well as water shortage warning system enables an safe machine using environment and a continuous test procedure.
4. The Salt Spray Chamber is introduced with Steam-Heated method with excellent temperature raise and uniform distribution to reduce the tester standby time;
5. Precise glass sprayer with controllable salt fog, salt fog flow makes cone-shaped dispenser of sprayer towel possible to scatter salt fog onto the test specimens in an uniform method and less & less crystalline salt can be found during test procedure.

Standard Compliance- salt spray test equipment

ASTM B117 Salt Spray(Fog) Test

ASTN D1654 Standard Test Method For Evaluation of Painted or Coated Specimens Subjected to Corrosive

Environments

ASTM D3359 Standard Test Methods for Measuring Adhesion By Tape Test

JIS H8502 Methods of Corrosion Resistance Test For Metallic Coatings

IEC 60068-2-11-1981 Basic Environmental Testing Procedures Part 2: Tests, Test Ka: Salt Mist

IEC6802-52 1996 Environmental Testing-Part 2: Tests-Test Kb: Salt mist, cyclic (Sodium Chloride Solution)

GJB 150.11A-2009 Laboratory Environmental Test Methods For Military Material- Part 11: Salt Fog Test

CNS 4159 CASS Test-Copper Accelerated Acetic Acetic Acid Salt Spray (Fog) Test

CNS 4158 Method of Salt Spray Fog Test for Surface Finishing

MIL-STD810F Environmental Engineering Considerations and Laboratory Tests

MIL-STD 202 Test Method Standard: Electronic and Electrical Component Parts

MIL-STD 883 Test Method Standard: Microcircuits

MIL-STD 1344 Test Methods For Electrical Connectors

RTCA DO-160 Section 14 (Avionics) IEC 68 Part 2

NEMA 250 Enclosures for Electrical Equipment

SAE J2334 International Surface Vehicle Standard-Cosmetic Corrosion Lab Test

SAE J 1211 Recommended Environmental Practices For Electronic Equipment Design

GM 9540P General Motors Engineering Standards: Accelerated Corrosion Test

Applications - salt spray test equipment

This Salt Spray Test Machine is designed with wide application to test corrosion resistance performances for surface treatment for various materials that includes Paint, electroplating, organic and inorganic coating process, anode process, anti-rust oil etc.

Specifications- salt spray test equipment

Parameters- salt spray test equipment

Salt spray test equipment Controller

Control Method
Adopts micro-computer control system, with resistance integral saturation PID control and BTC balance temperature control .
LCD Display
New ultra-thin 7 inch/10inch TFT color LED touch screen LDC (65535 color, resolution 800*480) , brightness controllable

Salt spray test equipment Picture for Reference

Salt spray test equipment Accessories Delivered With

In Standard Export Plywood Case for Salt Spray Test Equipment

Protect it from water during the long time shipping with the plastic film.and protect its corners with the foam.

After sale service- salt spray test equipment

We can offer the engineer to the overseas for repairing if you required,but you have to pay for his tickets and accommodation

Warranty- salt spray test equipment

one year for the machine.

each batch of parts is done quality sampling inspection before into the warehouse,and Each product before delivery is tested by the national authoritative third-party inspection agency.

Our other machines

Our Factory

DongGuan Bell Experimental Equipment Co.,Ltd

DongGuan Bell Experimental Equipment Co.,Ltd allocates itsself in DongCheng District Dong Guan City Guagndong Province, a high-tech enterpise specilized in environmental equipment R&D, manufacturer and covers an areas of more than 10000 square meters with its registered capital up to 500,00,000 RMB and annual throughtout up to more than 0.1 billion RMB. Bell boost a team that consists of more than 120 employees and 60 of them with college educated background and 15 of them with senior engineer qualification.

To meet manufacturing demand, Bell was introduced with the facilities such as advanced CNC shearing machine, bending machine, punching machine, laser welding machine etc. meanwhile, Bell recruited a large number of talents in R&D, manufacturing, most of them are capable to design, manufacture and install large size testing machine.

Bell utilized its independent R&D competence in mechanical and software engineering to product testing machines that wide applied in Scientic Institute, aerospace, military, electronic, electric, toy, paper works, hareware, battery, communications and assure the machine to meet the relevant standards regarding to environmental test and mechanical test such as GB, GJB,IEC, ISO, IEC, MIL,DIN, CE etc.