HLS Coatings （Shanghai）Co.Ltd
| Supply Ability | 200 Tons Per Day |
| Delivery Time | 30-60 Days |
| Packaging Details | 50kg、60 kg、200kg、1000kg packaging barrels |
| Application field | Agricultural machinery |
| Cooperation case | AGCO,BOYO |
| Performance | Excellent adhesion |
| main ingredients | Prevent shrinkage cavity agent |
| Brand Name | HAOLISEN |
| Model Number | HR-4000LB/HR-4010 |
| Certification | IATF16949 , ISO9001 |
| Place of Origin | Shanghai China （Mainland） |
View Detail Information
Explore similar products
No Stratified State High Weatherability Electrophoretic Paint Automotive
Smooth High Weatherability Electrophoretic Paint For Electric Car / Motorcycle
Corrosion Resistance Cationic Epoxy Electrocoat , Ced Coating For Hot Rolled
Colorful High Weatherability Electrophoretic Paint Film Fastening Performance
Product Specification
| Supply Ability | 200 Tons Per Day | Delivery Time | 30-60 Days |
| Packaging Details | 50kg、60 kg、200kg、1000kg packaging barrels | Application field | Agricultural machinery |
| Cooperation case | AGCO,BOYO | Performance | Excellent adhesion |
| main ingredients | Prevent shrinkage cavity agent | Brand Name | HAOLISEN |
| Model Number | HR-4000LB/HR-4010 | Certification | IATF16949 , ISO9001 |
| Place of Origin | Shanghai China （Mainland） | ||
| High Light | ced coating ，electrodeposition paint | ||
High weatherability electrophoretic paint for Agricultural machinery
Product Introduction :
|
HR-4000LB/HR-4010 Epoxy acrylic Gray Cationic Electrocoat is HLS Paint (Shanghai) Co., Ltd., the eighth generation of independent research and development of electrophoretic coating.
|
|
This coating by epoxy acrylate modified, the film also has excellent corrosion resistance and weatherability, smooth appearance and full, suitable as a base topcoat system. In addition, the lead, cadmium, chromium, mercury and other heavy metals, two-component, water dispersible resin, at the same time, previous generations of the product characteristics, have good adaptability to the galvanized steel, almost can be applied to all metal coating
|
|
such as: cold hot rolled steel, galvanized steel, aluminum, zinc Aluminum Alloy plate, stainless steel plate
|
This product features shown below:
①,The appearance of the coating is flat, delicate, smooth.
②,Good stability of bath can adaptable for a longer updating cycle.
③,The bath has strong anti-shrinkage and anti-pollution ability.
④,High penetration and good uniformity of internal and external.
⑤,Good weather resistance, very suitable for car body, car chassis, electric, three wheeled motorcycle frame and other industries.
The main component Matrix resin:
|
Matrix resin: Acrylic modified epoxy resin
|
Curing agent: Fully enclosed multi isocyanate |
|
Neutralizing agent: organic acid
|
Solvent: alcohol ether |
|
Additives: surface active agent, prevent shrinkage cavity agent
|
Pigment: carbon black, kaolin, antirust pigment |
Filling tank proportion and method :
⑴ Bath preparation
Ratio:
Resin 1400.00
Paste 233.00-175.00
NHF-01 10.00
DI water 1785.00
Total 3428.00-3370.00
⑵ Ripening conditions
Sample quantity: 3000～4500g
Container: 5L (Diameter 16cm)
Tank temperature:30 ±2℃
Time: 24～48Hr
Mixed conditions: impeller diameter 8cm (speed 200rpm)
(3) Coating conditions
Experimental panel: phosphated cold-rolled steel plate
Tank temperature: 28-35℃
Pole ratio: A/C = 1/2 ~ 1/4
Distance of electrodes: 15cm
ED time: For full immersing 1-3 minutes ( 20 seconds soft start)
Baking conditions:(165-175)℃×(20-30)min (Keeping temperature of parts coated)
Storage, packaging and transportation :
This product is a water-borne industrial coatings, non-hazardous, non-inflammable and explosive products; transportation to prevent direct sunlight, avoid freezing (>5℃ ); Packaging for 50/60/200L Plastic barrel; in the transport and storage of drums should be maintained clean, avoid charging the dirt brought in on drums during filling tank, again checked and confirmed that the quality of products, including paste resin, emulsions and additives should be indoor storage, good ventilation, dry, protect against freezing and overheating, the storage temperature should be controlled at 5～35℃, products from the date of production, over shelf, experimentation is required to determine whether can continue to use.
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2003
Total Annual:
100million-120million
Employee Number:
315~360
Ecer Certification：
Verified Supplier
Since its foundation in November 2003, HAOLISEN has been adhering to the vision of “Advocator and Innovator of Waterborne Coating Solutions” and committed to the development and production of industrial electrophoretic coatings by investing lots of human, material, energ... Since its foundation in November 2003, HAOLISEN has been adhering to the vision of “Advocator and Innovator of Waterborne Coating Solutions” and committed to the development and production of industrial electrophoretic coatings by investing lots of human, material, energ...
Get in touch with us
Leave a Message, we will call you back quickly!