Qingdao Hengfengyou Electrical Engineering Co., Ltd.
| Payment Terms | LC T/T |
| Supply Ability | 5000 pieces/year |
| Delivery Time | 15 DAYS |
| Packaging Details | wooden case |
| Material | Aluminum or Copper |
| Usage | Single-phase Transformer, Rectifier Transformer, Combined Transformer, Power Transformer, Distribution Transformer |
| Capacity | 100.125.160.200.250.315.400.500.630.800.1000 |
| HS Code | 85043190 |
| Product name | Dry Type Transformer |
| Certificate | CE,ISO,CQC,SABS,3C |
| Brand Name | HENGFENGYOU |
| Model Number | SCB10 |
| Certification | ISO IEC CB COC KEMA SNI SABS CCC |
| Place of Origin | China |
View Detail Information
Explore similar products
SCB10 11 0.4kv Dry Type Power Transformer 10KV / 30 - 2500KVA Epoxy Resin Cast
Resin Insulated Dry Type Transformer Three Phase 50 / 60Hz Frequency ISO9001
3000kVA Dry Type Epoxy Distribution Power Transformer ISO9001 Certification
20 Kv 140 Kva Dry Type Transformer Single Phase 50Hz / 60Hz Frequency CE ISO
Product Specification
| Payment Terms | LC T/T | Supply Ability | 5000 pieces/year |
| Delivery Time | 15 DAYS | Packaging Details | wooden case |
| Material | Aluminum or Copper | Usage | Single-phase Transformer, Rectifier Transformer, Combined Transformer, Power Transformer, Distribution Transformer |
| Capacity | 100.125.160.200.250.315.400.500.630.800.1000 | HS Code | 85043190 |
| Product name | Dry Type Transformer | Certificate | CE,ISO,CQC,SABS,3C |
| Brand Name | HENGFENGYOU | Model Number | SCB10 |
| Certification | ISO IEC CB COC KEMA SNI SABS CCC | Place of Origin | China |
| High Light | cast resin dry type transformer ，dry cast resin transformers | ||
SCB Dry Type power distribution transformer
SC(B)10, SC(B)11, SC(B)13 are the typical dry epoxy distribution power transformer, they are fireproof, compact and mainly designed for indoor use, and can be directly installed in the load center.
Dry transformers with high and low voltage windings are coated by a thin layer of epoxy resin. It has the advantages of flame retardant, self-extinguishing, moisture-proof, heat dissipation and so on. It can go deep into load centers, such as high-rise buildings, airports, wharfs, power plants, residential communities or complete sets of substations.
The company's products are mainly used for power transmission and transmission frequency of 50HZ, power network voltage of 10KV or 35KV, and the transmission and distribution of altitudes of 1000 meters and below. It can be used as power supply for rural and regional power supply and rural water drainage and drainage, outdoor installation, continuous use. With reliable technology, high-quality materials, good economic performance, good reputation and excellent service, our products have won unanimous praise from new and old customers.
Benefits:
1. Low noisy
2. Low partial discharge
3. High mechanical strength and strong short circuit resistance ability;
4. Strong impact resistance
Application
SC(B) Series DRY EPOXY RESIN DISTRIBUTION POWER TRANSFORMER is widely applied in hotels, high buildings, business centers, residence community, gymnasium, Petrochemical plant, airport, harbor, metro, mine, drillic.
Technical data
| Type | Rated capacity (KVA) | Connection groupgrade | Voltagecombination(KV) | Noloadloss (W) | loadloss(W) DyYy | No-load current(%) | Short-circuit resistance(%) | ||
| HighvoltageTappingrang | eLowvoltage | ||||||||
| SC12-30 | 30 | YynO . Dyn11 | 10 6.3 6 | 土5% +2x2.5% +x2.5% | 0.4 | 150 | 710 | 2.3 | 4.0 |
| SC12-50 | 50 | 215 | 1000 | 2.2 | |||||
| SC12-80 | 80 | 295 | 1380 | 1.7 | |||||
| SC12-100 | 100 | 320 | 1570 | 1.7 | |||||
| SC12-125 | 125 | 375 | 1850 | 1.5 | |||||
| SC(B)12-160 | 160 | 430 | 2130 | 1.5 | |||||
| SC(B)12-200 | 200 | 495 | 2530 | 1.3 | |||||
| SC(B)12-250 | 250 | 575 | 2760 | 1.3 | |||||
| SC(B)12-315 | 315 | 705 | 3470 | 1.1 | |||||
| SC(B)12--400 | 400 | 785 | 3990 | 1.1 | |||||
| SC(B)12-500 | 500 | 930 | 4880 | 1.1 | |||||
| SC(B)12-630 | 630 | 1070 | 5880 | 0.9 | |||||
| SC(B)12-630 | 630 | 1040 | 5960 | 0.9 | |||||
| SC(B)12-800 | 800 | 1215 | 6960 | 0.9 | |||||
| SC(B)12-1000 | 1000 | 1415 | 8130 | 0.9 | |||||
| SC(B)12-1250 | 1250 | 1670 | 9690 | 0.9 | |||||
| SC(B)12-1600 | 1600 | 1960 | 11730 | 0.9 | |||||
| SC(B)12-2000 | 2000 | 2440 | 14450 | 0.7 | |||||
| SC(B)12-2500 | 2500 | 2880 | 17170 | 0.7 | |||||
Low loss:the product no-load loss is 20% lower than the Sc (B) 11 type product with an excellent energysaving effect, economic efficient operation and without maintenance.
Low noise:the product noise level is 10-15 db lower than the existing professional standard JB/T10088- 2004Sound Level of 6- -220KV Transformer
Low partial discharge:resin mixture adopts foreign leading-edge mixing method and film type vacuumdeaerator to evenly mix the mixture and remove the bubble in the bottom part of mixture.
The product low partial discharge which can be controlled at 5PC. Both high voltage and low voltage coils can bepoured in vacuum pressure so as to enable a encapsulating of resin insulation and immersion amonglayers and inter-tums. The poured part has a compact solidity staicture with anti-flaming, anti explosionand environmental protection features. Glass fiber and other raw materials of winding coil have self- extinguishing property and will not producearc due to short circuit. Resin will not produce harmful gas under high temperature.
1.working condition
* Device types: indoor type
* Normal environment conditions of use: the elevation not more than 1000 m
* Environmental highest temperature + 40℃, minimum-25 ℃
* The special environment conditions of use: elevation of more than 1000 m
* Environmental highest temperature + 40 ℃, minimum-45 ℃. (when you order details)
* Mounting ambicnt: no corrosive gas, no obvious dirt environment
2.applicable standard
* IEC60076 power transformer
* IEC723 dry power transformer
* GB6450-1986 dry power transformer
* GB/R1094-1996 power transformer
* GB4208-1993 outer shell protect grade(IP code)
All products of the company have passed the national type test like CCC, CQC , CTQC and other
national mandatory product certification, and has a perfect quality, occupational health and
environmental management system certification system. Our products have passed ISO9001, 2000
and other international quality system certification.
None of the dry-type transformers we see today are installed in a separate, tightly enclosed room, as in
the oil-immersed type, but only in a relatively dry and clean room. In addition to this, it is also very convenient
to transport or carry, no matter what kind of transport vehicles, trains, cars or other non-motor vehicles can be,
but it is best to keep the car dry, clean and the product itself in good packaging. Practice has proved that really
good products will always be more and more marketable. As dry-type transformers have very good fire-proof
performance and are easy to install and maintain, they are also used more and more widely Especially in the
modern commercial downtown, residential areas, hospitals, airports, stations, subways, theaters, schools,
public places and other places with high requirements on fire protection.
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2008
Total Annual:
3000-5000
Employee Number:
100~200
Ecer Certification：
Active Member
Qingdao Hengfengyou Electrical Engineering Co., LTD., subordinate to Hengfengshuai Group, is an export-oriented enterprise with transmission and distribution industry as its main business, integrating product research and development, manufacturing and trade. Its main product... Qingdao Hengfengyou Electrical Engineering Co., LTD., subordinate to Hengfengshuai Group, is an export-oriented enterprise with transmission and distribution industry as its main business, integrating product research and development, manufacturing and trade. Its main product...
Get in touch with us
Leave a Message, we will call you back quickly!