Pego Electronics (Yi Chun) Company Limited
| Payment Terms | T/T, Western Union |
| Delivery Time | 15 working days |
| Packaging Details | woodencase |
| Standard | IEC60695-11-5 |
| Warranty | 12 months |
| Working Power | 220V/60Hz |
| Size | 1000mm(W)*650mm(D)*1300mm (H) |
| Shippment | by sea or air |
| Accessories | wrapping tissue, white pine board |
| Brand Name | PEGO GROUP |
| Model Number | PG-NF |
| Certification | Third-Lab Calibration Certificate |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC60332-1 Single Wire Flammability Test Apparatus 45 Degree Burner Angle
Manual Electrical Safety Test Equipment Stainless Steel Inclined Plane Device
Cold Bend Test Apparatus SUS304 Electrical Safety Test Equipment
1.1m Length Luminaire / Short Circuit Test Chain 63%Cu 37%Zn Material IEC60598-1
Product Specification
| Payment Terms | T/T, Western Union | Delivery Time | 15 working days |
| Packaging Details | woodencase | Standard | IEC60695-11-5 |
| Warranty | 12 months | Working Power | 220V/60Hz |
| Size | 1000mm(W)*650mm(D)*1300mm (H) | Shippment | by sea or air |
| Accessories | wrapping tissue, white pine board | Brand Name | PEGO GROUP |
| Model Number | PG-NF | Certification | Third-Lab Calibration Certificate |
| Place of Origin | China | ||
| High Light | hipot test equipment ，electrical testing instruments | ||
IEC60695-11-5 Needle Flame Flammability Testing Equipment - 12 Months Warranty
1. Introduction
The Needle Flame Tester consists of a dia.0.9mm needle burner that tilts to 45 degree from the vertical and is fueled with butane gas. The fire hazard of the specimen is assessed by measuring the burning duration of the specimen, and any ignition of the wrapping tissue and white pine board below the specimen. The equipment specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess product and material’s ignition risk and fire retardance by a simulation technique the fire.
Needle flame tester is designed according to IEC60695-11-5(IEC60695-2-2). It is applied to test lighting, low-voltage electrical appliances, household appliances, machine tools, electrical machinery, power tools, electronic instruments, electrical instruments, electrical connectors, accessories and etc., also contain insulating materials, engineering plastics or other solid combustible materials. .
The shell and important parts of the equipment are made by stainless steel, sculpt daintily, endure smoke corrupt, high automatism, high reliability of key parts of apparatus, numeric shows. Fixture could be adjusted. Test procedure could be controlled automatically.
2. Specification
| Burner | Φ 0.5mm ± 0.1mm, outer dia.: ≤Φ 0.9mm Length: 35mm, made by stainless steel. |
| Burner angle | 450 or 900 |
| Application time | 0-999.9s±0.1s adjustable (normally 30s) |
| Burning duration | 0-999.9s±0.1s auto record, manual pause |
| Flame height | 12mm ± 1mm (with height gauge) |
| Burn gas | 95% butane gas |
| Temperature range | 0-10000C |
| Flame requirement | rising time from 100℃±2℃ to 700℃±3℃ should within 23.5s±1s |
| Thermocouple | Φ0.5mm K type thermocouple |
| Experimental background | black background |
| Test period | auto control and independent exhaust |
| Standard | IEC60695-11-5 (IEC60695-2-2), GB/T51669.5, GB4706.1 |
| Working dimension | 0.5CBM, made by stainless steel |
| Equipment size | 1000mm(W)*650mm(D)*1300mm (H) |
| Power supply | AC220±10%, 50Hz, 0.3KVA |
3. Pictures
4. FAQ
1. What is the warranty period of the equipment?
Answer: the equipment warranty is 12 months upon you receipt of the equipment
2. Can you provide third-lab calibration certificate?
Answer: Yes, the equipment can send to the third-labs authorized by ISO17025 and get the calibration certificate, but the buyer should undertake the charges.
3. Does this equipment has English operation interface?
Answer: of course, yes, the operation interface has English instruction.
4. Your power plug can not be used in our country, can you change it for us?
Answer: yes, we will change the power plug to fit your demands, please subbmit this issue when you make order.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2014
Ecer Certification：
Verified Supplier
Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs... Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs...
Get in touch with us
Leave a Message, we will call you back quickly!