Pego Electronics (Yi Chun) Company Limited
| Payment Terms | T/T, Western Union, MoneyGram |
| Supply Ability | 50 sets/month |
| Delivery Time | 15 working days |
| Packaging Details | woodencase |
| Standard | GB/T8626, ISO11925-2 |
| Control system | PLC+touch screen |
| Product name | flame tester |
| Application | for testing the flammability of building material |
| Configuration | Combustion chamber, Ignition source, specimen holder |
| Warranty | 12 months |
| Brand Name | PEGO Group |
| Model Number | PG-BMF |
| Certification | Third-Lab Calibration Certificate |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC60332-1 Single Wire Flammability Test Apparatus 45 Degree Burner Angle
Manual Electrical Safety Test Equipment Stainless Steel Inclined Plane Device
Cold Bend Test Apparatus SUS304 Electrical Safety Test Equipment
1.1m Length Luminaire / Short Circuit Test Chain 63%Cu 37%Zn Material IEC60598-1
Product Specification
| Payment Terms | T/T, Western Union, MoneyGram | Supply Ability | 50 sets/month |
| Delivery Time | 15 working days | Packaging Details | woodencase |
| Standard | GB/T8626, ISO11925-2 | Control system | PLC+touch screen |
| Product name | flame tester | Application | for testing the flammability of building material |
| Configuration | Combustion chamber, Ignition source, specimen holder | Warranty | 12 months |
| Brand Name | PEGO Group | Model Number | PG-BMF |
| Certification | Third-Lab Calibration Certificate | Place of Origin | China |
| High Light | Building Material Flammability Tester ，PLC Control Flammability Tester ，Building Material flame tester | ||
ISO11925-2 Building Material Flammability Tester PLC Control
1. Introduction
The building material flammability tester is designed according to GB/T8626-2007 and ISO11925-2:2020 standards. In a normal combustion environment to assess the flammability of building products by direct impingement with a small flame on a vertically placed specimen.
The device is controlled by PLC and touch screen, the combustion chamber is made of stainless steel sheet with a heat-resistant glazed door, configure with gas burner and adjustment valve, specimen holder and etc., all the sizes are strictly manufactured as per the standard requirement.
2. Parameters
| Control units | PLC+7 inch LCD touch screen |
| Combustion chamber |
1). Completed designed according to ISO11925-2 figure 1 2). Material: made of stainless steel sheet with thickness 1.5mm 3). the heat-resistance glazed doors are installed on front and right-side panels 4). Outer dimension: W1000mm*D400mm*H810mm 5). Ventilation of the enclosure shall be free through the square box section base in the bottom of the chamber, the air vents consist of 5cm*5cm open squares (made of 1.5mm thickness stainless steel and 50cm in height) to keep the air flowing smoothly. |
| Ignition source |
1). The burner is completed designed according to ISO11925-2 figure 2 2). The burner shall be mounted onto a horizontal plate so that it moves smoothly forwards and backwards in a horizontal plate along the centreline of the combustion chamber 3). The burner can be used vertically or be tilted at 45° with respect to the vertical axis |
| Fuel | Commercial propane of 95% minimum purity, the gas pressure shall be between 10kPa and 50kPa (prepare by user) |
| Specimen holder |
1). The specimen holder is completed designed according to ISO11925-2 figure 3, and vertical installed as per figure 4 2). consisted by 2 stainless steel U-sharped frames, the frame has a thickness of 5±1mm,the two halves of the specimen holder shall be held together by screws or clamps to prevent the specimen warping. |
| Flame height gauge | Completed designed according ISO11925-2 figure 8 |
| Burner positioner | Completed designed according ISO11925-2 figure 9, edge flame impingement*1, surface flame impingement*1 |
| ignition | High pressure automatic ignition, durable combustion |
| Test flame height | 20±1mm (the flame height is adjusted by flowmeter, and measured by flame height gauge) |
| Flame application time | 0-999.9s (presettable) |
| Test time | 0-999.9s (presettable) |
| Anemometer | hot wire, with an accuracy of ±0.1m/s, for measuring the airflow velocity in the upper outlet of the combustion chamber |
| Input power supply | AC 220V/50Hz |
| Working condition | 15℃~35℃ (ambient temperature), ≤85% (R.H.) |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2014
Ecer Certification：
Verified Supplier
Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs... Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs...
Get in touch with us
Leave a Message, we will call you back quickly!