In the fast - paced world of consumer electronics, mobile phones and computers have become an integral part of our daily lives. Ensuring their performance, reliability, and durability across various environmental conditions is crucial for both manufacturers and consumers. Our Custom Walk - in Environmental Test Chamber is a specialized solution designed to meet the unique testing requirements of mobile phones and computers. This large - scale chamber enables comprehensive testing of these devices under a wide range of environmental factors, providing valuable insights into their performance and helping manufacturers improve product quality.
The most distinctive feature of our walk - in environmental test chamber is its large interior space. With standard dimensions that can be customized to fit specific needs, it can comfortably accommodate multiple mobile phones and computers simultaneously. This allows for large - scale testing, whether it's a batch of new mobile phone models or a set of different computer configurations. The ample space also enables the testing of larger computer components such as monitors and servers. Manufacturers can conduct tests on entire product lines at once, significantly reducing testing time and increasing efficiency.
This chamber offers precise control over a wide range of environmental parameters. Temperature can be adjusted from extremely cold (- 70°C) to very hot (150°C) with an accuracy of ± 0.5°C. This is crucial as mobile phones and computers need to function properly in diverse climates, from the freezing cold of arctic regions to the sweltering heat of deserts. Humidity levels can be regulated between 10% and 95% relative humidity, simulating different environmental moisture conditions. Additionally, the chamber can control air circulation, altitude simulation (to mimic high - altitude conditions), and even exposure to specific gases or pollutants, depending on the customization requirements.
We understand that different mobile phones and computers have unique design, features, and target markets. Therefore, our chamber allows for fully customizable test profiles. Manufacturers can program complex temperature and humidity cycles, dwell times, and transition rates to replicate real - world usage scenarios. For example, a test profile for a rugged mobile phone designed for outdoor use might include rapid temperature changes to simulate sudden weather changes, while a laptop intended for indoor office use could be tested under more stable environmental conditions with occasional spikes in temperature or humidity. This flexibility ensures that each device is tested under the most relevant and realistic conditions, leading to more accurate and actionable test results.
The chamber is equipped with an advanced monitoring and data acquisition system. Multiple sensors are strategically placed throughout the chamber to continuously monitor temperature, humidity, and other environmental parameters. These sensors provide real - time data, which can be accessed and analyzed through an intuitive control panel. The system also allows for the collection of performance data from the mobile phones and computers being tested, such as battery life, processing speed, and connectivity. This comprehensive data collection enables manufacturers to identify potential issues, analyze trends, and make informed decisions about product design and improvement.
Built with high - quality materials and advanced engineering techniques, the walk - in environmental test chamber is designed to be both safe and durable. The exterior is constructed from a robust, fire - resistant material that can withstand the rigors of continuous use. The internal components, including heating, cooling, and humidity control systems, are built to last and are regularly maintained to ensure consistent performance. Safety features such as emergency stop buttons, over - temperature protection, and gas leakage detection systems are in place to protect operators and the equipment being tested.
The chamber is equipped with a user - friendly interface that simplifies the testing process. The intuitive touch - screen control panel allows operators to easily set up test profiles, start and stop tests, and monitor real - time data. The interface also provides access to historical test data, enabling users to compare results from different tests and make informed decisions about product development. Additionally, the system can be integrated with other testing equipment and software, allowing for seamless data transfer and comprehensive analysis.
| Model |
WIC-6 |
WIC-11 |
WIC-15 |
WIC-48 |
WIC-66 |
WIC-1000 |
| Inside dimension(W x D x H) mm |
200 x 220 x 150 |
250 x 220 x 200 |
350 x 220 x 200 |
500 x 240 x 400 |
500 x 240 x 400 |
100 x 100 x 100 |
| Outside dimension(W x D x H) mm |
280 x 260 x 180 |
350 x 260 x 230 |
455 x 260 x 230 |
610 x 280 x 430 |
680 x 280 x 530 |
155 x 190 x 160 |
| Internal material |
#304 Stainless Steel |
| External material |
Powder coated #304 Stainless Steel |
| Temperature range |
+ 150℃~ - 70 ℃ |
| Humidity range |
20% ~ 98% R. H |
| Temperature resolution ℃ |
0.01 |
| Humidity resolution % R. H. |
0.1 |
| Temperature stability ℃ |
±0.5 |
| Humidity stability % R. H. |
±2 |
| Heating time |
30min |
| Cooling time |
-40℃/50min, -20℃/30min |
| Air circulation system |
Mechanical convection system |
| Cooling system |
Sirocco Fan |
| Heating system |
Sus316 Stainless steel Efficient heater |
| Humidification system |
Steam Generator |
| Humidification water supply |
Reservoir, Sensor-controller solenoid valve, recovery-recycle system |
| Controller |
Touch panel |
| Electrical power requirements |
Please contact us for requirements of specific models |
| Safety device |
Circuit system load protection, compressor load protection, control system load protection, humidifier load protection, overtemperature load protection, fault warning light |
Subjecting mobile phones and computers to comprehensive environmental testing in our walk - in chamber allows manufacturers to identify and address potential weaknesses in design, material selection, and manufacturing processes. By exposing the devices to a wide range of environmental conditions, manufacturers can detect issues such as overheating, battery drain, and connectivity problems. This enables them to make necessary design modifications and manufacturing improvements, resulting in higher - quality products that are more reliable and durable.
Early detection of product issues through environmental testing can save manufacturers significant costs. By identifying and resolving problems before mass production, companies can avoid expensive rework, production delays, and potential product recalls. The ability to test multiple devices simultaneously in the large - capacity chamber also reduces testing time and costs, improving the overall efficiency of the product development process.
Consumers today expect mobile phones and computers to perform well in various environmental conditions. By using our custom walk - in environmental test chamber, manufacturers can ensure that their products meet these expectations. This not only improves customer satisfaction but also helps companies gain a competitive edge in the market. Products that can withstand extreme temperatures, high humidity, and other challenging environmental factors are more likely to be preferred by consumers.
There are various international and national regulations regarding the environmental performance of mobile phones and computers. Our walk - in environmental test chamber helps manufacturers ensure that their products comply with these regulations. By conducting thorough testing in accordance with relevant standards, manufacturers can demonstrate compliance and gain market access more easily.
- Battery Performance: Test the battery life and charging performance of mobile phones under different temperature and humidity conditions. This helps manufacturers optimize battery design and improve the overall user experience.
- Display Quality: Evaluate the display quality of mobile phones, including brightness, color accuracy, and visibility, in various environmental conditions. Extreme temperatures and humidity can affect the performance of the display, and testing can help identify and address these issues.
- Connectivity: Test the connectivity of mobile phones, such as Wi - Fi, Bluetooth, and cellular networks, in different environmental settings. This ensures that the devices can maintain a stable connection even in challenging conditions.
- Processor Performance: Test the performance of computer processors under different temperature and workload conditions. This helps manufacturers ensure that the processors can handle demanding tasks without overheating or experiencing performance degradation.
- Hard Drive Reliability: Evaluate the reliability of hard drives in computers under various environmental conditions. Extreme temperatures and humidity can affect the read - write performance and lifespan of hard drives, and testing can help identify potential issues.
- Cooling System Efficiency: Test the cooling systems of computers to ensure their efficiency in different environmental conditions. This is crucial for preventing overheating and ensuring the long - term reliability of the computer.
Our Custom Walk - in Environmental Test Chamber for mobile phones and computers is a state - of - the - art solution that combines advanced technology, spacious design, and user - friendly operation. With its ability to simulate a wide range of environmental conditions, customize test profiles, and provide accurate data, it offers a comprehensive platform for testing the performance and reliability of these devices. Whether you are a manufacturer looking to improve product quality or a researcher seeking to understand the environmental impact on mobile phones and computers, our chamber is the ideal choice. Contact us today to learn more about how our chamber can meet your specific testing needs.
