Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days |
| Packaging Details | Export packing |
| Effective volume | 6.8m3 |
| Temperature range | -50℃~+180℃ |
| Humidity fluctuation | ≤±2.0%R.H |
| Humidity range | 20%～98%RH |
| Heating rate | 2℃/min (no load, average) |
| Cooling rate | 2℃/min (no load, average) |
| External dimensions Approx. | 2200*2200*3200mm(W*H*D) |
| Inner box dimensions | 2000*1800*1900mm(W*H*D) |
| Brand Name | Sinuo |
| Model Number | SN886-6800 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Walk in Environmental Test Chamber IEC 60068 Temperature Humidity Chambers
Constant Temperature Humidity walk in environmental test chamber 13m3 less than
IEC60529 IP5/6X EV Charge Station Walk-In Sand & Dust Test Chamber
IEC 60068 Temperature Humidity Walk In Environmental Test Chambers
Product Specification
| Payment Terms | T/T | Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days | Packaging Details | Export packing |
| Effective volume | 6.8m3 | Temperature range | -50℃~+180℃ |
| Humidity fluctuation | ≤±2.0%R.H | Humidity range | 20%～98%RH |
| Heating rate | 2℃/min (no load, average) | Cooling rate | 2℃/min (no load, average) |
| External dimensions Approx. | 2200*2200*3200mm(W*H*D) | Inner box dimensions | 2000*1800*1900mm(W*H*D) |
| Brand Name | Sinuo | Model Number | SN886-6800 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Constant Temperature and Humidity Test Chamber ，Temperature And Humidity Test Chamber ，Walk in Temperature And Humidity Test Chamber | ||
IEC60068-2-30 Walk-in Constant Temperature -and Humidity Test Chamber 6.8m³
Complied Standards & Clauses
Conforms to:
IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT”
IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT”
IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT”
IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT”
Product Overview
The walk-in constant temperature and humidity test room is suitable for safety performance testing, reliability testing, product screening testing, etc. of electronic components. At the same time, through these tests, the reliability of the product is improved and the quality control of the product is carried out.
The walk-in constant temperature and humidity test room is an essential test equipment in the fields of aviation, automobiles, home appliances, scientific research, etc. Sample range: electrical, electronic, semiconductor, communication, optoelectronics, electrical appliances, automotive electrical appliances, materials and other products. This equipment is used to assess and determine the parameters, performance, and adaptability of the above samples after the high and low temperature and humidity tests with rapid changes in temperature environment.
It is suitable for schools, factories, military industry, research and development and other units.
Technical Parameters
| 1.1 Model and Purpose | |
| 1.1.1 Product model | Walk-in Constant Temperature And Humidity Test Chamber SN886-6.8m³ |
| 1.1.2 Purpose | The walk-in constant temperature and humidity test room is suitable for safety performance testing, reliability testing, product screening testing, etc. of electronic components. At the same time, through these tests, the reliability of the product is improved and the quality control of the product is carried out. The walk-in constant temperature and humidity test room is an essential test equipment in the fields of aviation, automobiles, home appliances, scientific research, etc. Sample range: electrical, electronic, semiconductor, communication, optoelectronics, electrical appliances, automotive electrical appliances, materials and other products. This equipment is used to assess and determine the parameters, performance, and adaptability of the above samples after the high and low temperature and humidity tests with rapid changes in temperature environment. It is suitable for schools, factories, military industry, research and development and other units. |
| 1.2 Volume and Size | |
| 1.2.1 Effective volume | 6.8m3 |
| 1.2.2 Inner box dimensions | W: 2000 mm H: 1800 mm D: 1900 mm |
| 1.2.3 External dimensions Approx. | W: 2200 mm H: 2200 mm D: 3200 mm |
| 1.3 Performance (ambient temperature -5℃~+28℃, no-load condition) | ||
| 1.3.1 Temperature range | -50℃~+180℃ | |
| 1.3.2 Heating rate | about 2℃/min (no load, average) | |
| 1.3.3 Cooling rate | about 2℃/min (no load, average) | |
| 1.3.4 Resolution accuracy | 0.01℃ | Data measured under no-load conditions |
| 1.3.5 Temperature fluctuation | ±0.5℃ | |
| 1.3.6 Temperature deviation | ±2.0℃ | |
| 1.3.7 Humidity range | 20%～98%RH | |
| 1.3.8 Humidity deviation | Below 75%RH: ≤±5.0%RH Above 75%RH: ≤+2/-3%R.H | |
| 1.3.9 Humidity fluctuation | ≤±2.0%R.H | |
| 1.3.10 Temperature and humidity control capability range diagram | | |
| 1.3.11 Power supply | AC3￠5W 380V 50Hz (R, STN three-phase five-wire plus ground wire) (voltage fluctuation ≤ ±10%) | |
| 1.3.12 Power | The total power of the equipment is about 25KW | |
| 1.3.13 Noise | Measured according to GB/T14623-2008, the noise level is ≤75dB (the noise detection device is measured at a distance of 1m from the equipment door). | |
| 1.3.14 Standards | IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT” IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT” IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT” IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT” | |
| 1.3.15 Energy-saving design | The PLC (Programmable Logic Controller) of the control system is used. The operating conditions of the refrigerator are automatically adjusted according to the test conditions. The refrigeration system can adjust the power according to the load size. It also has compressor energy regulation technology. It can achieve excellent energy-saving effects. | |
| 1.3.16 Cooling method | The equipment adopts water cooling (Water tower, water pump)
| |
Details
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!