ROSCHEN GROUP
| Supply Ability | 100000000 pcs |
| Packaging Details | Steel bundle |
| Brand Name | ROSCHEN |
| Model Number | 2 1/4" |
| Certification | ISO |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Triple Key Hollow Stem Auger 3 1/4″ 83mm
Double Key Heavy Duty Hollow Stem Auger 4 1/4″ 108mm
Triple Key Heavy Duty Hollow Stem Auger 4 1/4″ 108mm
Double Key Heavy Duty Hollow Stem Auger 3 3/4″ 95mm
Product Specification
| Supply Ability | 100000000 pcs | Packaging Details | Steel bundle |
| Brand Name | ROSCHEN | Model Number | 2 1/4" |
| Certification | ISO | Place of Origin | CHINA |
| High Light | Hollow Stem Auger ，Auger drilling system ，Double Key Hollow Stem Auger | ||
2 1/4" - 2 Key Standard Duty - Hollow Stem Auger - 1 Bolt - 5' Section
The minimum hollow stem auger sizes recommended for installation of 2-inch diameter casing is 4.25 inches; however, larger hollow stem auger sizes may be necessary. The Environmental Protection Agency recommends the inner diameter of the auger be 3 inches to 5 inches greater than the outer diameter of the casing.
The tool joints are made from 4142 alloy steel and feature single-bolt connections.
All 2 1/4″ (57mm) Double Key Hollow Stem Augers feature a continuous hard faced flighting design, 3/8″ (9.5mm) thick on the outer edge with a 5″ pitch.
All 2 1/4″ (57mm) Double Key Hollow Stem Augers feature a continuous hardfaced flighting design, 3/8″ (9.5mm) thick on the outer edge with a 5″ pitch. The tool joints are made from 4142 alloy steel and feature single-bolt connections.
Specifications:
| Description | Lbs. | Kg. | |
| Auger Section | |||
| 1 | 2 1/4″ (57mm) DK Hollow Stem Auger 2 1/4″ (57mm) I.D. x 5 5/8″ (143mm) O.D. x 5′ (1524mm) | 52 | 23.5 |
| 2 | 2 1/4″ (57mm) DK Drive Cap with 1 5/8″ (41mm) Hex Pin | 16 | 7.3 |
| 3 | #2 Nut & Bolt for Rod-to-Cap Adapter | 0.9 | 0.4 |
| 4 | 2 1/8″ (54mm) Pilot Bit Connector (AW Box - A-Rod Box) | 5 | 2.3 |
| 4 | 2 1/8″ (54mm) Pilot Bit Connector (AWJ Box - A-Rod Box) | 5 | 2.3 |
| 5 | Rod-to-Cap Adapter - AW Pin | 3 | 1.4 |
| 5 | Rod-to-Cap Adapter - AWJ Pin | 3 | 1.4 |
| 6 | AW Drill Rod - 5′ (1524mm) | 21 | 9.5 |
| 6 | AWJ Drill Rod - 5′ (1524mm) | 23 | 10.4 |
| Auger Repair Parts | |||
| 1A | 2 1/4″ (57mm) DK Pin Tool Joint | 6 | 2.7 |
| 1B | 2 1/4″ (57mm) DK Box Tool Joint | 5 | 2.3 |
| 7 | ALB2 Auger Lock Bolt | 0.3 | 0.1 |
| 8 | ABN2 Auger Bushing Nut | 0.3 | 0.1 |
| 9 | ADK1 Auger Drive Key | 0.3 | 0.1 |
| Auger Cutterheads and Pilot Bits | |||
| 10 | 2 1/4″ (57mm) DK Spade Cutterhead - 6 1/2″ (165mm) O.D. | 10 | 4.5 |
| 10 | 2 1/4″ (57mm) DK Spade/Bullet Cutterhead - 6 1/2″ (165mm) O.D. | 9 | 4.1 |
| 10 | 2 1/4″ (57mm) DK Bullet Cutterhead - 6 1/2″ (165mm) O.D. | 10 | 4.5 |
| 10 | 2 1/4″ (57mm) DK 5-T Cutterhead - 6 1/2″ (165mm) O.D. | 10 | 4.5 |
| 11 | 2 1/8″ (54mm) Apex Pilot Bit, A-Rod Pin | 2.5 | 1.3 |
Hollow Stem Augers (HSA) are commonly used to set groundwater monitoring wells for environmental and geotechnical applications. With the option of an augerhead on Roschen ® machines you can turn 4.25 in. hollow stem augers with the same machine you had just been using for percussion probing.
Hollow Stem Auger (HSA)
Hollow Stem Auger is used primarily when the bore hole will not remain open. HSA consists of a Hollow Auger (4 ¼" ID). During drilling the center is filled with rods connected to a plug at the bottom bit.
Once desired depths is reached, the center rods and plug are pulled out. This leaves a cased hole for sampling or installations.
Solid Stem Auger (SSA)
Solid Stem Auger is the fastest and most effective way of retrieving samples in soft soil conditions.
By corkscrewing the Auger into the soil our drillers can retrieve a very accurate formation profile.
Solid Stem Auger (SSA) can also be used to set monitoring wells and install instrumentation in certain soil conditions.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
1921
Total Annual:
5000-2000000
Employee Number:
100~500
Ecer Certification：
Verified Supplier
ROSCHEN GROUP ROSCHEN Group has the world class advanced equipment like 12000 tons forging, metal processing plant, heat treatment workshop, numerical control plant, Advanced five-axis machining center, etc. professional technical and skilled team to ensure mining, mine... ROSCHEN GROUP ROSCHEN Group has the world class advanced equipment like 12000 tons forging, metal processing plant, heat treatment workshop, numerical control plant, Advanced five-axis machining center, etc. professional technical and skilled team to ensure mining, mine...
Get in touch with us
Leave a Message, we will call you back quickly!