Shanghai Rising International Trade Co., Ltd.
| Payment Terms | L/C, T/T |
| Supply Ability | 1000 ton per month |
| Delivery Time | 3-5weeks |
| Packaging Details | Ocean Safe Package, Wooden Pallets/ Cases |
| Model | 1100 |
| Color | Silver |
| Temper | H12 H14 H18 |
| Width | 100mm min |
| Thickness | 0.1-500mm |
| Length | 500-16000mm |
| Brand Name | SR OR OEM |
| Model Number | 1100 Aluminum sheet |
| Certification | SGS ROSH REACH |
| Place of Origin | China |
View Detail Information
Explore similar products
Industrial Pure 1070 Polished Aluminum Sheet Temper O/H High Plasticity Cable
1000 Series Aluminum Sheet Metal / 1060 Aluminum Sheet O Temper For Lights
1050 99.5% 1000 Aluminum Sheet ASTM B 491 Commercial Alloy O Temper
1050 H14 1000 Aluminum Sheet GB/T3190-1996 Standard For Building SGS Approval
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 1000 ton per month |
| Delivery Time | 3-5weeks | Packaging Details | Ocean Safe Package, Wooden Pallets/ Cases |
| Model | 1100 | Color | Silver |
| Temper | H12 H14 H18 | Width | 100mm min |
| Thickness | 0.1-500mm | Length | 500-16000mm |
| Brand Name | SR OR OEM | Model Number | 1100 Aluminum sheet |
| Certification | SGS ROSH REACH | Place of Origin | China |
| High Light | 1000 series aluminum ，aluminium alloy plate | ||
EN AW 1100 Aluminum Sheet H12 H14 H18 Temper Excellent Ductility and Welding
Description
1100 is commercially pure aluminum, the content aluminum is 99.00%, it is the most heavily alloyed of the 1000 series, it can not be strengthed by heat treatment. It has excellent ductility, corrosion resistant, welding, low density and strength, it also has good thermal conductivity and electrical conductivity. Other properties are similar as 1050A.The corrosion resistant can be improved by anodising processing which also make the surface more buautiful.
Composition Specification (%)
| Alloy | Mn | Cu | Fe + Si | Zn | Al | Others | ||||||||||
| Each | Total | |||||||||||||||
| 1100 | 0.05 | 0.05 - 0.20 | 0.95 | 0.10 | 99 (min) | 0.05 | 0.15 | |||||||||
Welding
1100 Aluminum sheet can be readily welded by all conventional methods. There are many sources of energy in modern welding, such as gas flame, arc, laser, electron beam, friction and ultrasonic wave.
Cold Working
This is an ideal alloy for cold working because of the good ductility in the annealed temper. It can be cold formed by bending, drawing or spinning. Normally, it is under room temperature, we can get sheet and plate with accurate dimension and smooth surface by this processing step.
Annealing
For the annealing, it may be necessary after severe cold working, it is done at 650°F(≈343.3°C) for sufficient time to allow for thorough heating and then air cooled.
Physical Properties
| Alloy | Density (Ibs/cubic in.) (1) | Melting Range Approximately (°F) (2)(3) | Average Coefficient of Thermal Expansion 68-212°F | Thermal Conductivity (btu-in/ft2hr °F ) | Electrical Conductivity at 68°F (Percent of International Annealed Copper Standard) | Electrical Resistivity at 68°F (Ohms-Cir.Mil/Foot) | ||||||||||
| Equal Volume | Equal Mass | |||||||||||||||
| 1100 | 0.098 | 1190-1215 | 13.1 | 1520 | 59 | 194 | 18 | |||||||||
| (1) Coefficient to be multiplied by 10-6. Example 12.2 x 10-6 = 0.0000122. (2) Melting ranges shown apply to wrought products of 1⁄4 inch thickness or greater. (3) Based on typical composition of the indicated alloys. | ||||||||||||||||
Application
Commonly used in rivets,aluminum-plastic panel, bus door, cooker, curtain wall, heat exchanger, ...,etc..
SR_Aluminium_datasheet_1100.pdf
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Importer,Exporter,Trading Company,Seller
Year Established:
2003
Total Annual:
2000000000-2500000000
Employee Number:
10~50
Ecer Certification：
Active Member
Rising International was established in 2003 with a registered capital of USD 25 million. For more than 15 years, Rising International has been recognized as a trusted partner and innovative aluminium producer and supplier at home and aboard, with a broad portfolio of quality aluminum prod... Rising International was established in 2003 with a registered capital of USD 25 million. For more than 15 years, Rising International has been recognized as a trusted partner and innovative aluminium producer and supplier at home and aboard, with a broad portfolio of quality aluminum prod...
Get in touch with us
Leave a Message, we will call you back quickly!