Sinof Hi-tech Material Co., Ltd.
| Color | Semi-transparent |
| Form | Pellet |
| Processing Method | Injection |
| MFR | 8-26 |
| Packaging Details | woven plastic bag with inner polyethylene bag |
| Delivery Time | To be negotiated |
| Payment Terms | L/C, T/T |
| Brand Name | Sinof |
| Model Number | SF-F22IE |
| Place of Origin | China |
View Detail Information
Explore similar products
PTFE Fine Powder SF-504 with Low RR for Membrane, Cable Wrapping Film, Seal Tape
PFA Pellet SF-3304C with MFR ＞24.1
MFR 1.5-2.5 Fluoropolymer Resin PVDF Powder SF-F22FP For Fishing Line
FEP Granule Fluoropolymer Resin SF-213 With MFR 2.1-5.9
Product Specification
| Color | Semi-transparent | Form | Pellet |
| Processing Method | Injection | MFR | 8-26 |
| Packaging Details | woven plastic bag with inner polyethylene bag | Delivery Time | To be negotiated |
| Payment Terms | L/C, T/T | Brand Name | Sinof |
| Model Number | SF-F22IE | Place of Origin | China |
White and Semi-transparent PVDF Pellet For Injection Processing SF-F22IE with MFR 8-26
Product Description
Polyvinylidene fluoride (PVDF) is the homopolymer of vinylidene fluoride (VDF). It is a new fluorocarbon thermoplastic with excellent mechanical performance, good impact resistance, abrasion resistance, weatherability and chemical stability. It is widely used in chemical industry, electrical and electronic industry, food industry, space industry and architectural decoration industry as it can be used to produce pump valves, pipe fittings, films, wire insulating layers, lithium battery adhesive and fluorocarbon coatings.
Grades and Technical Properties
| Item | Unit | Test standard | SF-F22IE | SF-F22IS |
| MFR | g/10min | ASTM D1238 | 8-26 | 10-30 |
| Melt Viscosity@230℃,100s-1 | Pa.S | ASTM D3835 | 700-1000 | |
| Density | g/cm3 | ASTM D792 | 1.77-1.78 | 1.75-1.79 |
| Melting Point | ℃ | ASTM D3418 | 164-172 | 166-172 |
| Water Absorption | Wt% | ASTM D570 | ＜0.05 | |
| Tensile Strength at Yield | MPa | ASTM D638 | ＞45 | ＞50 |
| Tensile Strength at Break | MPa | ASTM D638 | ＞40 | ＞35 |
| Modulus | MPa | ASTM D638 | 2000-2300 | 2200-2600 |
| Notched IZOD Impact Strength@23℃ | J/m | ASTM D256 | 80-100 | 80-1000 |
| Limiting Oxygen Index(sheet 3mm thick) | % | ASTM D2683 | 43 | 44 |
Applications:
SF-F22IE is prepared by VDF emulsion polymerization, SF-F22IS is prepared by VDP suspension polymerization. The pellet can be applied in the injection process for Pipes, fittings, Valves and Pump assemblies.
Process safety instructions
1. This product should be processed under 370℃,to avoid producing toxic gases;
2. PVDF has good fire resistance and smoke inhibition property, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds;
3. Operators should take good care of personal protection during the use procedure and processing.
Packaging and storage
1. 25 kg and 250 kg packages can be provided. PVDF is packed in double layer of polyethylene plastic bag and then put into a hard cardboard drum.
2. It must be stored in clean, cool, dry place.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2001
Total Annual:
2000000-2500000
Employee Number:
80~100
Ecer Certification：
Verified Supplier
As a leading supplier of fluoro plastic industry, Sinof has been participating in this area over 20 years. With our talented R&D team and special technology, we can supply PTFE, PVDF, FEP, PFA, ETFE, PEEK, PPS, etc. in form of pellet, powder, dispersion. We supply the most commonly used grades a... As a leading supplier of fluoro plastic industry, Sinof has been participating in this area over 20 years. With our talented R&D team and special technology, we can supply PTFE, PVDF, FEP, PFA, ETFE, PEEK, PPS, etc. in form of pellet, powder, dispersion. We supply the most commonly used grades a...
Get in touch with us
Leave a Message, we will call you back quickly!