Shenzhen Fibery Photoelectron Technology Ltd.,
| Payment Terms | T/T, L/C, Western Union, MoneyGram,Paypal |
| Supply Ability | 5000Unit/Month |
| Delivery Time | 3-6 work days |
| Packaging Details | pvc box+outer carton |
| Product name | fiber transceiver |
| Wavelength | 850nm |
| Distance | 550m |
| Data rate | 10Gb/s |
| Interface | Dual LC |
| Power supply | Single +3.3V |
| Warranty | 3 Years |
| Application | Ethernet,Fiber Channel,Switch to Switch interface |
| Brand Name | Fibery |
| Model Number | XFP-10G-SR |
| Certification | ISO9001 |
| Place of Origin | China |
View Detail Information
Explore similar products
10G SFP+ Active Optical Cable , Huawei Cisco AOC Cables SFP-10G-AOC1M
155M Bidi Singlemode Wdm SFP Module , 1310nm 1550nm Sc 20Km Sfp Lc Transceiver
Bidirectional Fiber Optic Transceiver 1.25G Lc Connector 20Km Single Fiber Sfp
300M 850Nm 10G SFP+ Transceiver , Dual Multimode Fiber Transceiver Sfp-10G-Sr
Product Specification
| Payment Terms | T/T, L/C, Western Union, MoneyGram,Paypal | Supply Ability | 5000Unit/Month |
| Delivery Time | 3-6 work days | Packaging Details | pvc box+outer carton |
| Product name | fiber transceiver | Wavelength | 850nm |
| Distance | 550m | Data rate | 10Gb/s |
| Interface | Dual LC | Power supply | Single +3.3V |
| Warranty | 3 Years | Application | Ethernet,Fiber Channel,Switch to Switch interface |
| Brand Name | Fibery | Model Number | XFP-10G-SR |
| Certification | ISO9001 | Place of Origin | China |
| High Light | bidirectional fiber optic transceiver ，fiber optic sfp module | ||
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Max. | Unit | Note |
| Supply Voltage | Vcc | -0.5 | 4.0 | V | |
| Storage Temperature | TS | -40 | 85 | °C | |
| Relative Humidity | RH | 0 | 85 | % |
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.
General Operating Characteristics
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Data Rate | DR | 9.95 | 10.3125 | 11.3 | Gb/s | |
| Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
| Supply Current | Icc5 | 500 | mA | |||
| Operating Case Temp. | Tc | 0 | 70 | °C | ||
| TI | -20 | 80 |
Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-20 to 80 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Differential data input swing | VIN,PP | 120 | 820 | mVpp | ||
| Transmit Disable Voltage | VD | 2.0 | Vcc | V | 1 | |
| Transmit Enable Voltage | VEN | Vee | Vee+0.8 | |||
| Input differential impedance | Rin | 100 | Ω | 2 | ||
| Transmit Disable Assert Time | Tda | 10 | us | |||
| Receiver | ||||||
| Differential data output swing | Vout,pp | 340 | 850 | mVpp | 3 | |
| Output rise time and fall time | Tr, Tf | 38 | Ps | 4 | ||
| LOS Fault | VLOS_F | VCC-0.5 | Vcc | V | 5 | |
| LOS Normal | VLOS_N | Vee | Vee+0.5 | V | 5 | |
Notes:
1. Or open circuit.
2. After internal AC coupling.
3. Into 100 ohms differential termination.
4. 20 – 80 %.
5. Loss Of Signal is open collector to be pulled up with a 4.7k~ 10k resistor to 3.15 – 3.6V.
Logic 0,indicates normal operation; logic 1 indicates no signal detected.
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-20 to 80 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Operating Wavelength | λ | 1260 | 1270 | 1280 | nm | |
| 1320 | 1330 | 1340 | ||||
| Ave. output power (Enabled) | PAVE | -3 | 3 | dBm | 1 | |
| Side-Mode Suppression Ratio | SMSR | 30 | dB | |||
| Optical Modulation Amplitude | POMA | -2.8 | 0 | dB | OMA | |
| Extinction Ratio | ER | 4 | 4.5 | dB | ||
| RMS spectral width | Δλ | 0.45 | nm | |||
| Rise/Fall time (20%~80%) | Tr/Tf | 45 | ps | |||
| Dispersion penalty | TDP | 3.2 | dB | |||
| Relative Intensity Noise | RIN | -130 | dB/Hz | |||
| Output Optical Eye | Compliant with IEEE 0802.3ae | |||||
| Receiver | ||||||
| Operating Wavelength | λ | 1320 | 1330 | 1340 | nm | |
| 1260 | 1270 | 1280 | ||||
| Receiver Sensitivity(ER=4.5) | PSEN1 | -12.6 | dBm | 2 | ||
| Receiver Sensitivity(ER=6) | PSEN2 | -14.4 | dBm | 2 | ||
| Average Receive Power | PAVE | 0.5 | dBm | |||
| Receiver Reflectance | Rrx | -12 | dB | |||
| LOS Assert | Pa | -30 | dBm | |||
| LOS De-assert | Pd | -17 | dBm | |||
| LOS Hysteresis | Pd-Pa | 0.5 | dB | |||
Notes:
1. Average power figures are informative only, per IEEE 802.3ae.
2. Measured with worst ER; BER<10-12; 231 – 1 PRBS.
| PIN # | Name | Function | Name/Description | Notes |
| 1 | GND | Module Ground | 1 | |
| 2 | VEE5 | Optional -5.2V Power Supply (Not requireed) | ||
| 3 | LVTTL-I | MOD_DESEL | Module De-select; When held low allows the module to respond to 2-wire serial interface | |
| 4 | LVTTL-O | INTb | Interrupt; Indicates presence of an important condition which can be read via the 2-wire serial interface | 2 |
| 5 | LVTTL-I | TX_DIS | Transmitter Disable; Turns off transmitter laser output | |
| 6 | VCC5 | +5V Power Supply (Not required) | ||
| 7 | GND | Module Ground | 1 | |
| 8 | VCC3 | +3.3V Power Supply | ||
| 9 | VCC3 | +3.3V Power Supply | ||
| 10 | LVTTL-I/O | SCL | 2-Wire Serial Interface Clock | 2 |
| 11 | LVTTL-I/O | SDA | 2-Wire Serial Interface Data Line | 2 |
| 12 | LVTTL-O | MOD_Abs | Indicates Module is not present. Grounded in the Module | 2 |
| 13 | LVTTL-O | MOD_NR | Module Not Ready; Indicating Module Operational Fault | 2 |
| 14 | LVTTL-O | RX_LOS | Receiver Loss Of Signal Indicator | 2 |
| 15 | GND | Module Ground | 1 | |
| 16 | GND | Module Ground | 1 | |
| 17 | CML-O | RDN | Receiver Inverted Data Output | |
| 18 | CML-O | RDP | Receiver Non-Inverted Data Output | |
| 19 | GND | Module Ground | 1 | |
| 20 | VCC2 | +1.8V Power Supply (Not required). | ||
| 21 | LVTTL-I | P_DOWN/RST | Power down; When high, requires the module to limit power consumption to 1.5W or below. 2-Wire serial interface must be functional in the low power mode. | |
| 21 | LVTTL-I | P_DOWN/RST | Reset; The falling edge initiates a complete reset of the module including the2-wire serial interface, equivalent to a power cycle. | |
| 22 | VCC2 | +1.8V Power Supply (Not required) | ||
| 23 | GND | Module Ground | 1 | |
| 24 | PECL-I | REFCLK+ | Not used, internally terminated to 50ohm (100ohm diff). | 3 |
| 25 | PECL-I | REFCLK- | Not used, internally terminated to 50ohm (100ohm diff). | 3 |
| 26 | GND | Module Ground | 1 | |
| 27 | GND | Module Ground | 1 | |
| 28 | CML-I | TD- | Transmitter Inverted Data Input | |
| 29 | CML-I | TD+ | Transmitter Non-Inverted Data Input | |
| 30 | GND | Module Ground | 1 |
Notes:
Notes:
1. Module circuit ground is isolated from module chassis ground within the module.
2. Open collector; should be pulled up with 4.7k – 10k ohms on host board to a voltage between 3.15Vand 3.6V.
3. Reference Clock input is not required.
Ordering Information
| XFP Bidi,9.95 to 11.3Gb/s, 1270/1330nm, 20km, 0~70℃, with Digital Diagnostic Monitor |
| XFP Bidi,9.95 to 11.3Gb/s, 1330/1270nm, 20km, 0~70℃, with Digital Diagnostic Monitor |
| XFP Bidi,9.95 to 11.3Gb/s, 1270/1330nm, 20km, -20~80℃, with Digital Diagnostic Monitor |
| XFP Bidi,9.95 to 11.3Gb/s, 1330/1270nm, 20km, -20~80℃, with Digital Diagnostic Monitor |
●10GBASE-LR at 10.3125Gbps
●10GBASE-LW at 9.953Gbps
●Other optical link
FAQ
Q1. Can I have a sample order for this product?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-6 days, mass production time needs 1-2 weeks for order quantity more than
Q3. Do you have any MOQ limit for sample order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping are also optional.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Trading Company,Seller,Other
Year Established:
2011
Total Annual:
2000000-50000000
Employee Number:
100~120
Ecer Certification：
Active Member
Shenzhen Fibery Photoelectron Technology Ltd., is professional in development, production and sale,mainly for gepon onu,gpon ont,olt,sfp transceiver ,media converter,fiber optic cable,fiber optic patch cord,plc splitter, cwdm/dwdm etc. We are located in Shenzhen with convenient transpor... Shenzhen Fibery Photoelectron Technology Ltd., is professional in development, production and sale,mainly for gepon onu,gpon ont,olt,sfp transceiver ,media converter,fiber optic cable,fiber optic patch cord,plc splitter, cwdm/dwdm etc. We are located in Shenzhen with convenient transpor...
Get in touch with us
Leave a Message, we will call you back quickly!