Shenzhen Hicorpwell Technology Co., Ltd
| Payment Terms | Western Union, L/C, T/T |
| Supply Ability | 1000KM Per Month |
| Packaging Details | Standard length: 2km/roll (as per your requirements) |
| Fiber Preform | Optical fiber G652D preform |
| Material | Silica |
| Purpose | Optical fiber G652D Bare Fiber |
| Fiber | G652D |
| Length | 1500 mm - 700 mm |
| Diameter | 80-28 mm |
| A Introduction | Drawing a preform containing a glass core and a glass clad |
| Brand Name | HICORPWELL |
| Model Number | Optical Fiber G652D Preform |
| Certification | IEC 60794-2-10/11 |
| Place of Origin | China |
View Detail Information
Explore similar products
Multi Legged 2500nm 50um Core Optical Fiber Bundle
Side Sparcable Fiber 0.25 Diameter PMMA Plastic Bare Light Optical Fiber
SM MM Dummy Fiber OTDR Bare Optical Fiber Ring Box
0.25mm PMMA Plastic Optic Fiber For Data Communication
Product Specification
| Payment Terms | Western Union, L/C, T/T | Supply Ability | 1000KM Per Month |
| Packaging Details | Standard length: 2km/roll (as per your requirements) | Fiber Preform | Optical fiber G652D preform |
| Material | Silica | Purpose | Optical fiber G652D Bare Fiber |
| Fiber | G652D | Length | 1500 mm - 700 mm |
| Diameter | 80-28 mm | A Introduction | Drawing a preform containing a glass core and a glass clad |
| Brand Name | HICORPWELL | Model Number | Optical Fiber G652D Preform |
| Certification | IEC 60794-2-10/11 | Place of Origin | China |
| High Light | G652D Optical Fiber Preform ，1500mm Optical Fiber Preform ，Diameter 80mm Fiber Preform | ||
Optical fiber production begins with a preform. Silica is commonly used to make optical fiber ,
because it has good transmission over a wide range of wavelengths and low absorption and scattering losses (~0.2 dB/km).
Silica is also highly resistant to both mechanical and optical damage. The core/clad ratio of the preform is maintained during the draw process.
The resulting optical fiber has this same core/clad ratio.The silica fiber production facility in Hicorpwell uses cylindrical silica preforms.
It can withstand pulling and bending as well as amplified laser pulses.
Our Hicorpwell optical fiber in one of two ways: drawing a preform containing a glass core and a glass clad or drawing a pure silica rod
and coating the resulting fiber with an optical polymer as the cladding.
The preform is prepared for draw on the glass-working lathe.
The handle end is chucked, or loaded, into the top-feed unit located at the top of the tower.
The top-feed unit lowers the preform into the furnace, and the heating process begins.
This inline furnace has a graphite element that surrounds, but does not touch, the preform.
The graphite allows the heat to be evenly distributed around the glass cylinder.
High-purity, oxygen-free Argon gas is cycled through the furnace to protect the graphite element at high temperatures.
The furnace slowly heats up the preform. As the temperature rises, the preform will start to glow.
This bright orange glow is caused by the heat of the furnace and will scatter at the weld between the handle and the preform.
The preform transmits light similarly to the optical fiber it will become.
Once the furnace reaches about 2000 °C, the drop end of the preform begins to fall under gravity through the hole in the bottom of the furnace.
The drop end is what remains after a quartz handle has been removed after firepolishing.
A technician cuts the drop end off the glass flow and begins to pull the newly drawn fiber out of the furnace.
He tapes a small weight to the end of the glass and threads it through the rest of the apparatuses along the length of the tower and into the capstan puller.
Company Details
Business Type:
Manufacturer,Importer,Exporter
Year Established:
2013
Total Annual:
3,000,000-5,000,000
Employee Number:
160~166
Ecer Certification：
Site Member
Shenzhen Hicorpwell Technology co.,Ltd was founded in 2013 is located in Shenzhen , workshop area more than 3000 square meters . The company is at the forefront of Research &Development, Manufacturing, and Sales of a broad range of fiber optic and connectivity products, includi... Shenzhen Hicorpwell Technology co.,Ltd was founded in 2013 is located in Shenzhen , workshop area more than 3000 square meters . The company is at the forefront of Research &Development, Manufacturing, and Sales of a broad range of fiber optic and connectivity products, includi...
Get in touch with us
Leave a Message, we will call you back quickly!