Jiangyin M&C Heat Parts Co.,Ltd
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 50000Pcs/Month |
| Delivery Time | 5-8 working days |
| Packaging Details | Standard export carton /wooden case |
| Model | VT40/VT40P/VT40M |
| Name | Plate Heat Exchanger Gasket/Plate |
| Max Design Pressure | 2.5 MPaG Max. |
| Plate Material | Stainless Steel, Titanium, High Nickel Alloy, Nickel and others |
| Gasket Material | NBR, EPDM, FPM, NBRHT, VITON |
| Surface Area | 0.46 ㎡ |
| Plate Theta Angle | 118 ° 118 ° |
| Connection Dia | 113 mm |
| Plate Corrugate Thickness | 3.9 mm |
| Plate Centre Length* Width | 1227 * 257 mm |
| Plate Shape Length*Width | 1400 * 425 mm |
| Brand Name | M&C |
| Model Number | VT40/VT40P/VT40M |
| Certification | SGS FDA ISO |
| Place of Origin | Jiangsu China (mainland) |
View Detail Information
Explore similar products
Glued Plate Heat Exchanger Gaskets Stainless Steel Frame Body Structure AN25L1
LH104 Non Oxidizing Silicone Gasket Sheet , Custom Rubber Gasket Excellent
V100 Plate Heat Exchanger Gaskets SGS FDA ISO Certified Flat Shape
Removable Plate Heat Exchanger Gaskets Equivalent V120
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 50000Pcs/Month |
| Delivery Time | 5-8 working days | Packaging Details | Standard export carton /wooden case |
| Model | VT40/VT40P/VT40M | Name | Plate Heat Exchanger Gasket/Plate |
| Max Design Pressure | 2.5 MPaG Max. | Plate Material | Stainless Steel, Titanium, High Nickel Alloy, Nickel and others |
| Gasket Material | NBR, EPDM, FPM, NBRHT, VITON | Surface Area | 0.46 ㎡ |
| Plate Theta Angle | 118 ° 118 ° | Connection Dia | 113 mm |
| Plate Corrugate Thickness | 3.9 mm | Plate Centre Length* Width | 1227 * 257 mm |
| Plate Shape Length*Width | 1400 * 425 mm | Brand Name | M&C |
| Model Number | VT40/VT40P/VT40M | Certification | SGS FDA ISO |
| Place of Origin | Jiangsu China (mainland) | ||
| High Light | 2.5MPa Plate Heat Exchanger Gaskets ，VT40M Plate Heat Exchanger Gaskets ，VT40M phe gasket | ||
GEA VT40/VT40P/VT40M Stainless Steel Plate Heat Exchangers Plates and Gaskets
VT40/VT40P/VT40M Plate Heat Exchanger Basic Design
The basic structure of a PHE is shown below. The specific execution depends on the application.
Components of a gasketed PHE
| No. | Component | No. | Component |
| 1 | Top beam | 6 | HE plates |
| 2 | Piping cinnections | 7 | Bottom guide beam |
| 3 | Fixed plate | 8 | HE plate gasket |
| 4 | Column | 9 | Nut on tensioning bolt |
| 5 | Loose plate | 10 | Tensioning bolts |
The HE plate pack consists of individual embossed HE plates with the associated HE plate gaskets.
The HE plate gaskets seal the flow media towards one another and the environment.
The number and the arrangement of HE plates depends on the requirements specified in the order.
Constituents of a HE plate
| No. | Component | No. | Component |
| 11 | WT plate profile | 13 | Leakage spaces |
| 12 | HE plate gasket | 14 | Round gasket sections |
VT40/VT40P/VT40M Model Plate Heat Exchanger Specification
| Surface Area | 0.46㎡ |
| Plate Theta Angle | 118 ° 118 ° |
| Connection Diameter | 113 mm |
| Plate Corrugate Thickness | 3.9 mm |
| Plate Centre Length* Width | 1227 * 257 mm |
| Plate Shape Length*Width | 1400 * 425 mm |
VT40/VT40P/VT40M Plate Heat Exchanger Technical Information
| Model | Connection Size | Dim.A | Dim.B | Dim.C |
| VT20 Safetytherm | 3"(DN80) | 21.4"(620mm) | 56.6"(1488mm) | Up to 127"(3235mm) |
| VT40 Safetytherm | 5"(DN125) | 28.0"(710mm) | 74.2"(1885mm) | Up to 139"(3535mm) |
Heat Transfer Plate: 316L Stainless Steel.
Gasket: NBR, EPDM, Viton, and others on request.
Port Connection: Unlined, Metal Lined, Raised Welded Neck Flange and others on request.
Maximum Design Pressure: 230 psig(16 barg)
Maximum Design Temperature: 370 ° F(190 °C), depending on gasket selection
Approximate Maximum Liquid Flow Rate: VT20 Saftetytherm:440 gpm (100m³/hour)
VT40 Saftetytherm: 924 gpm (210m³/hour)
VT40/VT40P/VT40M Plate Heat Exchanger Gasket & Plate Pictures
VT40/VT40P/VT40M Gasketed Plate Heat Exchanger - Varitherm Systematic Product Variety
Whether in heating or cooling of liquids containing particles of up to 2mm in size, in condensing vapours or in gas cooling and gas dehumidifying in special cases- Varitherm plate heat exchangers offer a convincing solution with the widest range of possible applications.
The Varitherm Series has two convincing arguments in its favour. Firstly there is a wide range of materials available, including 1.40301/AISI304, nickel-based alloy, Incolloy, nickel, tantalum and titanium. Secondly it comes with an individual plate pack that can be easily expanded to meet your future needs. And this makes the Varitherm Series the optimum economic solution for just about every application.
| Advantages at a Glance | ||
|
|
|
|
|
|
| ||
| Benefits at a Glance |
|
Gentle product handling
The gentle treatment of products caused by the soft corrugation makes the Varitherm the obvious choice for the foodstuffs industry.
PHE Type of Safetherm and Varitherm
| Safetytherm | VT10 VT20 VT40 |
| Varitherm | VT04 VT10 VT20 VT40 VT80 VT130 VT180 VT250 VT405 VT805 VT1306 VT2508 |
VT40/VT40P/VT40M Frame
PHEs are available in various application-specific frame versions. The basic versions are the C and B designs, with the B design being used above all for longer plate packs.Variants of these designs are marked by further abbreviations.
Special Stianless steel versions are employed in foodstuff and pharmaceutical applications and may include intermediate plates for separating the individual sections.
Some frames are equipped with height-adjustable bases
PHE Troubleshooting
1. Insufficient Performance
| Fault | Cause | Remedy |
| Reduced heat transfer | Deposits on the HE plates | Clean HE plates - Cleaning HE plates while PHE is open and cleaning HE plates while PHE is closed. |
| Operation, flow media etc. differing from the design case | Have PHE design with new operating data checked by M&C | |
| Excessive pressure loss | Plugging of manifold flow gaps obstructs flow | Clean HE plates - Cleaning HE plates while PHE is open and cleaning HE plates while PHE is closed. |
| Incorrect installation of HE plates obstructs flow | Check installation order by means of circuit diagram | |
| Operation, flow media etc.differing from the design case | Have PHE design with new operating data checked by M&C |
2. Leaks
| Fault | Cause | Remedy |
| Leaks between the HE plates - flow media escape from the HE plate pack | Incorrect tensioning dimension of PHE | Check correct tensioning dimension according to rating plate data |
| Excessive operating pressure | Check operating pressure according to rating plate data | |
| Operating temperatures too high/too low | Check operating temperatures according to rating plate data | |
| HE plate gaskets are not properly seated | Open the PHE and correct the seat of HE plate gaskets | |
| HE plate gaskets are soiled | Open the PHE and clean the HE plate gaskets | |
| HE plate gaskets either defective or hardened | Open the PHE and replace the HE plate gaskets | |
| Leaks between HE plates and frames, reinforcement plates and intermediate plates | Incorrectly seated HE plate and frame gaskets | Open the PHE and correct seat of plate and frame gaskets |
| HE plate and frame gaskets are soiled | Open the PHE and clean the HE plate and frame gaskets | |
| HE plate and frame gaskets are defective | Open the PHE and replace the HE plate and frame gaskets | |
| Leaks between frame connection and pipework | Excessive load of frame connection from pipework | Reduce connecting loads to permitted values |
| Gasket improperly seated | Slacken off frame connection and correct gasket seat | |
| Dirty gasket | Slacken off frame connection and clean the gasket | |
| Defective gasket | Slacken off frame connection and replace the gasket | |
| Flange connection is not sufficiently tightened | Check gasket and retighten connection evenly if required | |
| Damaged HE plates | Excessive tightening of HE plate pack (tensioning dimension below a min.) | Replace defective HE plates |
| Damaged HE plates | Corrosion of HE plate material | Check design of PHE regarding flow media, contact M&C |
| Damaged HE plates at the beginning or at the end of the PHE | Incorrect earthing when welding on special connections to open frame connecting pipes | Repalce defective HE plates |
Plate Heat Exchanger Pictures
M&C Heat Parts Company Profile
M&C Heat Parts Co., Ltd is founded in Wuxi, Jiangsu. M&C is specialized in designing and manufacturing high quality heat transfer equipment. The range of products comprises plates & gaskets, plate heat exchangers, gasketed heat exchangers and brazed heat exchangers. Thus, as one of the few producers worldwide, M&C offers solutions with optimum thermodynamic designs for different industries and virtually all applications.
M&C provide you with one-stop accessories service, multuple-brand & multiple model alternatives for your choice. We'll meet all your requirements of plate heat exchanger and keep your machine running contunously through our rich storage and quick response.
Moreover, we have a strict quality control and after-sales service system, from material purchasing to finished product package until the product received in good condition. Our products have been widely used all over the world in various fields.
M&C Plate Heat Exchanger Plates & Gaskets Other Models Recommend
Sondex/Danfoss - S4A, S7, S20, S21, S22, S41, S43, S47, S65, S81, S86, S100, S120, S130, SFD7, SFD13, SW19 and so on;
APV/SPX - H17, N25, N35, A055, A085, J060, J092, J107, M92, M107, K55, K71, B110, B134, P105, P190, SR1, SR2, TR9GN, TR9AL and so on;
Tranter/Swep - GX12, GL13, GC26, GC51, GX26, GX51, GX42, GX64, GX85, GX91, GX140, GX145 and so on;
API/Schmidt - Sigma 7, Sigma 9, Sigma 13, Sigma 26, Sigma 27, Sigma 36, Sigma 66, Sigma 106, Sigma 229, Sigma Star 45, Sigma Star 90 and so on;
Vicarb - V4, V13, V20, V28, V45, V60, V100, V110, V130 and so on;
Hisaka - EX11, EX15, EX15, LX026, LX195, LX395, LX595, RX135, RX395, RX595, UX115, UX225, UX395, UX495, UX815, UX995 and so on;
GEA - VT04, VT10, VT20, VT40, VT80, VT405, VT805, VT1306, NT50M, NT50X, NT100S, NT150S, NT150L, NT250M, NT250L and so on;
Funke - FP04, FP05, FP14, FP16, FP08, FP22, FP31, FP40, FP41, FP70, FP100, FP120 and so on;
Thermowave - TL200SS/PP, TL250SS/PP, TL400SS/PP. TL650SS/PP and so on;
DHP - DX143, DX146, DX20V, DX20DL, DX20DM, DX30S, DX36M and so on;
LHE - HT101, HT102, HT104, HT151, HT152, HT202, HT232, HT233 and so on;
M&C Plate Heat Exchanger Goods ready to Delivery
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2011
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Jiangyin M&C Heat Parts Co.,Ltd is a China heat exchanger manufacturer located in Wuxi, Jiangsu. M&C performing service and maintenance on heat exchanger gaskets and plates for other models. M&C operates at the forefront of thermal technology,offering innovative and effectiv... Jiangyin M&C Heat Parts Co.,Ltd is a China heat exchanger manufacturer located in Wuxi, Jiangsu. M&C performing service and maintenance on heat exchanger gaskets and plates for other models. M&C operates at the forefront of thermal technology,offering innovative and effectiv...
Get in touch with us
Leave a Message, we will call you back quickly!