Evaporator Low Fin Tube Heat Exchanger Condenser N Type

Product Specification

Heat Exchanger Condenser Evaporator Low Fin Tube N Type​

Our Materials
We offer you a broad portfolio of materials and can expand our offering at any time to meet your specific needs regarding thermal conductivity, mechanical properties, or corrosion resistance. Low-finned tubes made by Wieland Thermal Solutions are already available in copper, copper-nickel, brass, carbon steel, stainless steel, and titanium.

• The ‘Low Fin Tube’ is also known as Integral Fin Tube. This type of fin tube is widely being used in the Industry Today.
• The Low Fin Tubes/Integral Fin Tubes are increasingly being used in various Fluid Heat Exchangers. Unlike other Fin Tubes the application is not limited to Air – Fluid type of heat exchangers. As a result they are used in various types of Shell And Tube heat exchanger also.
• The fins are manufactured rolling the Fin in the Base tube Itself. The fin height is relatively very low. However number of Fins Per inch or the fin Density can be increased greatly and improve the heat transfer area. The rolling is done on a special machine and the same can be supplied in straight as well as U bend configuration.

Quick Detail:

 
Description: 
Manufacturing process: The fins are rolled out of outer wall of the plain tubes by a pass roller. Tubes and fins are in same piece tube. We call it “N” fin type.
 
More Carbon Steel Tube Materials Sheet We're Supplying:

Delivery Range of Low Fin Tubes
We can provide the integral low fin tubes with un-finned section gaps( 5mm Min.) in the middle of core tube OR bent with designed Bend Radius.
 
Quality Test:
The integral low fin tube quality is assured by hydrostatic or pneumatic tests, eddy current tests & MARCO            tests in order to verify design specifications.
 Acceptance Ceritia: 
 WOLVERINE  /  HPT  / GEWA-K & GEWA-KS 
 
Delivery Condition:
Tube ends are square cut, free burrs, internally dried and air blown clean, externally coated with varnish.
The desiccants are put into the each package for continental transportation.
 
 
Applications: 
​The Integral Low Finned Tubes find the preference in the following industrial sectors:

1. Heating systems
2. Ventilation systems
3. Refrigeration and climate control systems
4. Mechanical engineering
5. Automotive manufacturing
6. Chemicals and pertrochemical and power plant technology

 
Specifications: 
Tube and fins consist of same tube and materials as carbon steel , low-alloy steels , stainless steel , brass , copper , cooper-nickel alloys , aluminum bronze , nickel alloys , titanium etc...

Data sheet of Low Fin Tubes

 
 
Competitive Advantage:

1. We have more than 10,000 square meters workshop, including 10 finning machines, daily extrusion capacity up to 3,000 meters.
2. The finning machines of Integral Low Fin Tubes are designed and assembled by ourselves and we can offer you finning machines and all accessories etc...
3. The Integral Low Fins are rolled out of the tube surface to increase the tubes external surface area, without affecting any others dimension.
4. Low Fins are very useful for tight condensers and exhibits high efficiency of heat transfer.
5. Economical solutions of heat exchange problems of media with different heat conduction abilities or different current conditions.
6. High chemical-, thermal- and mechanical resistance, suitable for rough operation conditions.