High Voltage Switch Circuit Breaker Analyzer , Dynamic Circuit Breaker Tester

Product Specification

High Voltage Switch Mechanical Characteristic Tester , Circuit Breaker Analyzer , Dynamic Characteristics Test

I. Products Description and Application 

FKGC series High voltage switch characteristics test instrument can be used to test and measure mechanical dynamic characteristics parameters of vacuum, SF6, less oil, more oil type power system’s high voltage switch and etc. It is the most convenient tool for high voltage switch’s repairerment and test for its stable data of measurement, easy wiring and simple operation, which make it possible to carry out experiments in power stations with 500kv grade and below.

II. Features

1. The apparatus can automatically identify breaker status of on or off for fracture and operates accordingly with clue.
2. Independent fracture 6 can test and indicate connection status of fracture so that it is convenient for users to check wiring.
3. The device can store fifty sets of testing results.
4. Its big screen(320×240)LCD display is an advanced grey screen which does not reflect or black screen in sunshine. Besides, its menu interface with clues of pictures and characters menu operation is rather personal and easy to operate.
5. The device has powerful graphical analysis function, which makes it possible to display waveform and measured data simultaneously. Thus testing process is more self-evident.
6. The device contains delay and protection function, which makes it possible to cutoff coil voltage automatically after circuit breaker operates. Therefore, the circuit breaker and the testing instrument are well protected.
7. The device can be used to carry out electric and manual switch test.
8. The device can be used in experiment of low voltage and high voltage, and seek the minimum voltage or closing voltage automatically.
9. It can be used in reclosing experiment for parameters measurement of closing-opening, opening-closing and opening-closing-opening.
10. Parameter measurement of vacuum contactor (single coil) .

III. Technical Parameters

1.Time measurement: 

1) 6 channels or 12 channels optional

2) Test items covers: Inherent opening (closing) time

                                 Different period of opening (closing)

                                 Different period between opening (closing)

                                 Bouncing time of closing (opening) (bouncing times)

3) Measurement range: 0.01ms～10000ms

4) Accuracy: 0.1%±2 digital within 1ms～100ms

                    0.5%±2 digital over 100ms

2. Speed measurement

1) Test items covers: Opening(closing) speed

                             The average speed for designed period of time (distance or angle range)

                             Speed measurement range: 1mm sensor 0.01～25.00m/s,

2) Test accuracy :  0.1mm sensor         0.001～2.50m/s

                              0.5°angle sensor    0.01～25.00m/s

                              Universal sensor      0.01～10.00m/s

3.Distance measurement: moving contact travel ( travel)

• Contact travel ( contact separation)
• Overshooting travel or kickback (excess of stroke)

4.Sensor measurement range:

• linear displacement sensor 50mm, resolution: 0.1mm, distance 0.1～50mm
• linear displacement sensor 300mm, resolution: 0.1mm, distance 10～300mm(optional)
• linear displacement sensor 500mm, resolution: 1mm, distance 10～500mm(optional)
• 360 line sensor: 360о,resolution: 0.5о, distance 1mm～1000mm

5. Current measurement: the maximum value of opening(closing) coil

6. Display screen: 320×240 Liquid Crystal Display, contrast adjustable

7. Data storage: a hundred sets of measuring data

8. Printer: High speed thermal printer

9. Apparatus power supply: AC/DC 220V ± 10%；50Hz ± 2%

10. DC power supply: output voltage: c

11. Host volume: 360×250×140mm

12. Operational environment: -10℃~+50℃

13. Relative humidity: ≤90%