Attractive and reasonable price CE Approved Heavy Duty Hoist For Heavy Load

CD/MD heavy duty hoist is a small light lifting equipment,with a compact,light weight,small size,parts versatility,easy operation. Hardened gear transmission design,long life and high mechanical efficiency. Taper rotor brake motor with motor. With the way of upper and lower safety limit devices.

The products can be widely used for lifting heavy objects or installed on single girder crane,a straight line,curve the word beam,double beam can also be used to hoist,hoist gantry crane or jib cranes,it is the industrial and mining enterprises,railway,docks,lifting equipment commonly used in warehouses.

1.Overload protection:if the material is over the capacity,the hoist will give a sharp warning for protection inself.

2.Emergency brake:if the operation staff encounter some emergency situation,we could start the emergency brake system to protection the related treasure.

3.Control method:Room control or remote control to avoid any injure to the operation staff

1.Low-vibration,quiet-running motor,

2.Fast acting brake,

3.Gearbox lubricated for life,

4.Protective rope guide,

5.Frequency inverter for stepless travel motions.

Technical parameters of heavy duty hoist for heavy load

Motor:Hoist motot is a taper type rotor motor with braking,it is one of the best quality motors,which has bigger torque,so it can be adapted to moving frequently,the maximum torque is 2.4-3 times than the rated torque.

Gear box:Hoist gear box has specially treated gears for high wear resistance. Each geared shaft assembly is supported on ball or roller bearings,to ensure smooth,low-friction operation.

Wire rope:Hoisting ropes comply with the exporting standards. The leading rope taken by the drum does not slip sideways when slack. The factor of safety,on the nominal breaking strength of the rope is six.

Rope drum:Grooved hoist drums,seamless pipe of adequeate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum shaft resolves on ball bearing for ensuring smooth running.

Electric apparatus controlling system:Model CD1 and MD1 hoist is composed of the contactor box,controlling switch,cut off limiter,the working voltage of controlling switch is 380V,36V or 24v(safety voltage).

Rope guide:Rope guide is in two halves,ensuring easy accessibility, It encircles the drum completely,so that the rope may not uncoil even when the hoist is in unloaded condition, The rope guides of our company is thicken and dilated,so that it is not easy to be damaged.

Delivery of heavy duty hoist for heavy load:

1.Payment terms is flexible,

2.Design the crane according to your technical request,

3.Delivery on time,

4.Our engineer can arrive to the installation site to help fixing the crane for you.

5.Diversity products,

6.Warranty:12 months