750kw Micro Pelton Turbine Generator Stainless Steel 92% Efficiency

Product Specification

Horizontal 750kw Mircro Pelton Turbine Generator For Hydro Power Plant

overview

vertical Pelton turbine with single runner and double nozzle. It consists of main machine, nozzle apparatus, inlet part, deflector regulating apparatus, reverse nozzle mechanic, etc.

Main Machine: Including Rotary Part (working part) and Machine House

a. Rotary part: including runner, water throw ring, etc. The runner is the heart of turbine. The properties of the runner are critical for the properties of the turbine. This runner is cast by stainless steel. The shape of bucket is like two half-spoon, there is a water dividing edge in the middle. The water dividing edge divide the water flow jetted to the bucket to two sides in order to reduce water collision lost.
There is a notch on the top of the bucket to avoid the bucket hamper the flow impulse
the following bucket. The water throw ring can stop the water overflow along shaft.
b. Machine house including house and cover. The house connects the main part in a whole. One of the bearings for deflector shaft is located on a truncated cone hole near the connection between the house and the distributor. Connect the cover and house by screws and put asbestos pad between them.

The package of Project

a. Verification of documents submitted
b. Audition of documents by the authority
c. Signing the contract
2. Engineering Design
a. Selection of a complete set of equipment according to the request or Runh Power's recommandation or the request from the commissioner.
b. Design of overall layout and all the sub-systems within the parameter of power plant.
c. Selection of personnel participating in the project
d. Submission of technical solution to the commissioner for review and approval.
3.Equipment Purchase& Transportation
a.Turbo Generator Set and its auxiliary systems (boiler, condensing water collector, deaerator, high pressure and low pressure superheaters, power distribution system. etc )
b. All the construction material, tools, spare parts and other necessities of the project
4. Civil Construction
a. All the civil construction work within the parameter of power plant
5. Operation & Maintenance
a. Operation of power plant (technical counseling)
b.Regular maintenance and inspection
c.Technical Training Program for Power Plant Personnel
d.General Overhaul
6. Installation & Testing
a.Installation & testing for all systems & equipment provided by Runh Power
b.Installation, testing & trail run of all systems of a power plant
c.Installation, testing & trail run of entire power plant
7. Supply of Spare Parts
a. Long-term supply of spare parts and other consumibles.

Specification

Why choose us?

1. More than 20 years of industry experience, install commissioning more than 150 equipment each year

2. Provide complete proposal for hydro power plant from water to wire

3. Abundant foreign power plant project implementation experience such as France, Japan, USA, South Africa, Sri Lanka, Iran, Southeast Asia

4. Design and manufacture of hydro power generator with voltage 400V,6.3KV . capacity exceed 1000kw with 400V

FAQ

1.You are a trading company or a manufacture?

We are a hydro turbine generator manufacture with over 20 years of experiences, Our factory is in the Sichuan you will take 2 hours driving after you reach Shuangliu Airport, pay a visit to our factory you will know more about us.

2.What Kind of water turbine should I choose?

We need to know water head, flow rate, voltage level, frequency, on-grid or off-grid running, automation level from you to work out the solution

3: Can you do the EPC for the hydro power plant?

Yes, We can design, producing and install the equipment, we will dispatch technologist and workers to install the equipment.