Rexroth Direction Valve M-3SED10CK13 350CG24N9K4 Blue / White Optimal Oil Flow

Product Specification

Description:

M-3SED10CK13 350CG24N9K4 is a kind of Rexroth solenoid shut-off valve, which belongs to direct-acting shut-off solenoid directional valves and is mainly used to control the flow, stop and direction of the oil. The valve is mainly composed of valve body, solenoid, and steel ball. The spring setting determines the initial position of the valve. In the event of a power failure, the “u-type valve is in the open state, while the ‘C’ type valve is in the closed state. The valve chamber located behind the closing member is connected to the oil port P and is sealed off from the oil port T. The valve is pressure balanced with respect to the manipulating forces (solenoid and spring). This valve can be used at operating pressures up to 35 MPa at P, A and TA and can pass flow in both directions. The solenoid coil can be replaced and manual emergency operation is optional.
 

Application Areas:

M-3SED10CK13 350CG24N9K4 is widely used in many industries, including but not limited to: aerospace, metallurgy, mining, construction machinery, petrochemicals, textiles, plastic machines, etc..
 

Advantages:

Convenient maintenance: the structure of the ball valve is simple, the seal ring is generally movable, disassembly and replacement are relatively convenient. When fully open or fully closed, the sealing surfaces of the ball and seat are separated from the medium, and when the medium passes through, it will not cause erosion of the sealing surface of the valve.
Wide range of application: diameter from small to several millimeters, large to several meters, from high vacuum to high pressure can be applied. The structure of the ball valve is similar to that of the plug valve, and some people call it a spherical plug valve. It consists of a ball and two seats (sealing ring) composed of sealing vice. The most commonly used material for the valve seat is PTFE plastic. In a variety of valves in the ball valve fluid resistance is the smallest, it also has the advantages of rapid switching, good sealing.
Simple structure, small volume, light weight: Rexroth ball valve structure is simple, small volume, light weight. Tight and reliable, at present the sealing surface material of the ball valve is widely used in plastic, good sealing, and has been widely used in vacuum systems. Easy to operate, open and close quickly, from fully open to fully closed just rotate 90 °, easy to control from a distance.
High reliability: the solenoid valve can be reliably commutated after energized and reliably reset after power failure.
Low pressure loss: the pressure loss of the solenoid valve consists of the flow loss and throttling loss generated when the liquid flows through the orifice of the solenoid valve.
Low internal leakage: the internal leakage of the electromagnetic directional valve is very small from the high-pressure cavity to the low-pressure cavity when it is in various different working positions under the specified working conditions.
Fast commutation and reset time: the time required from the energization of the solenoid to the termination of spool commutation is short, and the reset time is also short.
High commutation frequency: the maximum number of commutations allowed per unit time is high.
Long service life: solenoid valve used to the main parts are damaged, can not carry out normal commutation and reset action, or used to its main performance indicators deteriorate significantly more than the specified indicators experienced by the number of commutation.

FAQ:

Q1: Wonder if you accept small orders?

A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products to my country?

A2: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q3: What's your payment terms ?

A3: By T/T,LC AT SIGHT,100% full payment.

Q4: How long is your production lead time?

A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.

Q5: When can I get the quotation ?

A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.