EVI Low Temp Heat Pump , Commercial Heat Pump Side Blowing 380V / 60HZ MD30D

Product Specification

EVI low temperature heat pump MD30D side blowing 380V.side blowing 380V60HZ

1. Complying with ISO standard. Quality Ensured.

2. Complete Inspection for each unit before out of factory, covering water system and electricity detection and testing, ensuring 100% right product before shipment.

3. Strict quality control during production. We have liquid soap detection, halogen detection, electrical detection and water-soaking detection during production to avoid gas leakage and electrical problems .

4. Full inspection on bigger parts such as compressors, condensers, evaporators, expansion valves, flow switches, controllers etc.. Selection inspection for small parts such as sensors, pressure switches etc..

5. Well noise control by using mute cotton for casing plates and soft rubber feet for floating compressors, some of the models use compressor isolation shields.

6. Well insulated with insulated cotton for every pipe and parts, include compressor, dryer filter and each pipes.

7. We have passed TUV and SGS inspections. We have CE, RoHs, IEC, CCC, CB certificates for most of our products. Some of our products have en14511 test, en14825 test.

A. Payment service

1. T/T

2. L/C (for container order only)

B. Technical service

1. We calculate the capacity and recommend the best models.

2.We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.

3. We supply the spare parts and technical support in and after the warranty time.

4. We supply the training course to your workers at our factory if you need.

5. We can offer site training to your workers in your place which is negotiable.

C. After-sales service

1. Technical support for your installation, operation and maintenance.

2. Standard warranty time: One years’warranty for heat pumps

You can also pay for extended warranty or we can renegotiate the longer warranty period.

3. Spare parts and technical support at most economic prices after the warranty.

Meeting series heat pump use well selected and tested world famous brand components to assure stable and efficient performance.

Meeting series heat pump can control a 3 way valve to divert house heating and producing domestic hot water. Domestic hot water is priority.

Meeting series heat pump can work with various Meeting tanks for domestic hot water production.

Meeting series heat pump can work with many kinds of auxiliary heaters such as wood-fired, oil or gas boiler.

Auxiliary heaters could be switched on/off via heat pump signal.

Meeting heat pump could be started up via an existing thermostat.

It also results in less supplementary heating to cover the full heating demand on the coldest days.

Two speed energy saving fan motors. The speed of fan varies so only the required amount of air is utilized.

The blades are specially designed to move as much air as possible at the lowest noise level.

Timer ON/OFF

Automatically turn on electric heater in pre-set time period to heat water up to pre-set temperature to prevent Legionnella

Smart defrost

Varied heat curve. Heat pump heating water temperature will change automatically according to outdoor temp. to let you feel comfortable all the time

Most components are well sealed to retain heat and prevent dripping.