Super Low Noise Meeting Heat Pump 12KW Water Heater Air To Water

Product Specification

Meetingb heat pump Super low noise heat pump 12KW Water heater air to water

Technology Specifications

Quick Details

Super  low noise  heat pump supply the most energy saving hot water for house heating and domestic use in winter, and cooled water for air conditioning in hot summer. Heat pumps are among the most economical ways to supply heating and cooling on air and water, which can reduce the electricity costs up to 70%. It is much more safe than conventional way and create zero carbon emissions.

Porduct Advantage:

1.meeting ultra - low temperature heating heat pump adopts EVI ultra-low temperature compressor and high - efficiency and environment-friendly refrigerant suitable for cold regions in the north, and the heating effect is 20 % - 40 % higher than that of conventional units under low temperature conditions, and the equipment will not decrease with the ambient temperature. Reduce the amount of heat, fully guarantee the effect of heating.

2 , meeting ultra-low temperature heating heat pump can be used normally below 0 °C, the minimum can be normal operation at -25 °C , and -20 °C energy efficiency ratio up to 2.0 or more , is our company exports to Europe for the heating of the flagship product, in Eastern, Western Europe, Northern Europe and other ten countries are used for indoor heating in the winter and spring seasons. It is also an energy-saving product that is very suitable for heating in northern China . It is used as a room heating in a cold area alone or as a heating device for heating needs . 

Do you have somewhere to put it?

You'll need a place outside your home where a unit can be fitted to a wall or placed on the ground. It will need plenty of space around it to get a good flow of air. A sunny wall is ideal.

Is your home well insulated?

Since air source heat pumps work best when producing heat at a lower temperature than traditional boilers, it's essential that your home is insulated and draught-proofed well for the heating system to be effective.

Exhibition Show 

QC:

1. Complying with ISO standard. Quality Ensured.

2. Complete Inspection for each unit before out of factory, covering water system and electricity detection and testing, ensuring 100% right product before shipment.

3. Strict quality control during production. We have liquid soap detection, halogen detection, electrical detection and water-soaking detection during production to avoid gas leakage and electrical problems .

4. Full inspection on bigger parts such as compressors, condensers, evaporators, expansion valves, flow switches, controllers etc.. Selection inspection for small parts such as sensors, pressure switches etc..

5. Well noise control by using mute cotton for casing plates and soft rubber feet for floating compressors, some of the models use compressor isolation shields.

6. Well insulated with insulated cotton for every pipe and parts, include compressor, dryer filter and each pipes.

7. We have passed TUV and SGS inspections. We have CE, RoHs, IEC, CCC, CB certificates for most of our products. Some of our products have en14511 test, en14825 test.

FAQ

Q1. Can I have a sample order for Heat pump or Water tank?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A: Sample needs 3-10days, mass production time depend on the products'quantity.

Q3. Do you offer guarantee for the products?

A: Yes, 12 months since the heat pump depart from the port of loading (Refer to the Bill of Lading).