Guangzhou HongCe Equipment Co., Ltd.
| Packaging Details | Plywood |
| Delivery Time | 25 days |
| Payment Terms | T/T, Western Union |
| Supply Ability | 15 set per month |
| Standard | IEC60320-1 figure 19 |
| Flexible cable bending height | 40±2 mm, adjustable. |
| Pull range | 0-100N |
| Calibration certificate | With CNAS logo |
| Place of Origin | China |
| Brand Name | HongCe |
| Model Number | CF-2 |
View Detail Information
Explore similar products
IEC60884-1 Plug Socket Tester Temperature Rising Tester 0-125A Testing Current
Switch Plug Socket Endurance Tester 6 Stations For Rotary Switch Synchronization
Figure 21 Plug Cord 999999 Flexibility Test Apparatus
VDE0620-1 Measuring Gauges For Checking Dimensions Of Germany Plugs And Sockets
Product Specification
| Packaging Details | Plywood | Delivery Time | 25 days |
| Payment Terms | T/T, Western Union | Supply Ability | 15 set per month |
| Standard | IEC60320-1 figure 19 | Flexible cable bending height | 40±2 mm, adjustable. |
| Pull range | 0-100N | Calibration certificate | With CNAS logo |
| Place of Origin | China | Brand Name | HongCe |
| Model Number | CF-2 | ||
| High Light | mechanical switch tester ，switch life tester | ||
Coupler Lateral Pulling Testing Apparatus
Product Information:
This device is according to the IEC60320-1, figure 19 standard requirement to design. It is used for the testing of withdrawing appliance inlet under the conditions of the connector with force, for this reason to test the mechanical strength of the connector.
Technical Parameters:
1, Flexible cable bending height: 40±2 mm, adjustable.
2, Pull range: 0-100N.
3, Pull way: Manual operation,50 times in one direction and then 50 times in the opposite direction.
4, Conductor Selection and the corresponding test lateral pulls value table
Table 7 - Values for the lateral pulls applied
| Rated current of connector A | Pull N |
| 2.5 | 6 |
| 6 | 35 |
| 10 | 35 |
| 16 | 50 |
Using method:
1. Select the corresponding apparatus input socket according to the required test of the connector to install and tighten.
2. Insert the connector into the input socket of the appliance, you can adjust the adjustment block properly for other special connectors.
3. With the spring balance end to lock the connector soft cable, flat on the bakelite supporting block.
4. To pull the connector to the required test force, and the position can be adjusted.
5. Normal test, after pulling 50 times, rotate connector and appliance input socket 180°, and then pull 50 times. Do not need to release spring balance end, then corresponding rotation.
After the test, whether to enter the follow-up test according to the connector is damaged or not.
Note:
1. Ensure that the terminal is clamped and pay attention to safety when testing;
2. When spring scale is not in used, it should be kept loose state;
3. Apparatus should be kept dry, dust proof, pay attention to the maintenance of the equipment after the test is completed.
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!