Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 20 set per month |
| Delivery Time | 10 working days |
| Packaging Details | plywood |
| Name | Cold Bend Test Apparatus |
| Standard | IEC 60811-1-4, IEC 60811-504 |
| Warranty | 1 year |
| Stations | 2 |
| Mandrel | 13 PCS |
| external diameter of sample | 2.5mm ～12.5mm |
| application | Bending test at low temperature |
| Operation method | manual |
| Brand Name | HongCe |
| Model Number | HDX1307 |
| Certification | Third part calibration certificate(cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC 60745-2-1 Electric Hammer Durability Test Apparatus Steel Ball Diameter 38mm
IEC 60811 Natural Convection Oven Heating Chamber 8-20 Air Changes Per Hour
IEC Testing equipment Inductive Load Bank With 3 Test Stations Output Current
IEC 60745-2-5 Testing Equipment For Circular Saw Switch And Lower Guard
Product Specification
| Payment Terms | T/T | Supply Ability | 20 set per month |
| Delivery Time | 10 working days | Packaging Details | plywood |
| Name | Cold Bend Test Apparatus | Standard | IEC 60811-1-4, IEC 60811-504 |
| Warranty | 1 year | Stations | 2 |
| Mandrel | 13 PCS | external diameter of sample | 2.5mm ～12.5mm |
| application | Bending test at low temperature | Operation method | manual |
| Brand Name | HongCe | Model Number | HDX1307 |
| Certification | Third part calibration certificate(cost additional) | Place of Origin | China |
| High Light | Manual IEC Test Equipment ，Cables Sheaths IEC Test Equipment ，IEC 60811 Cold Bend Test Apparatus | ||
IEC Test Equipment IEC 60811 Cold Bend Test Apparatus For Cables Sheaths and Insulation
Product presentation of IEC Test Equipment:
Low temperature bending tester is a device used to test the dynamic bending performance of wire and cable at low temperature. The equipment is mainly composed of low temperature thermostat, winding device and material testing system. It is suitable for circular wire and cable with outer diameter less than or equal to 12.5mm or circular insulated wire core, as well as flat wire and cable with short sleeve size less than or equal to 20mm or fan insulated wire core that cannot be made into dumbbell pieces.
Standard of Cold Bend Test Apparatus:
IEC 60811-1-4 Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-4: Methods for general application - Test at low temperature clause 8.1 and 8.2;
IEC 60811-504 Electric and optical fibre cables – Test methods for non-metallic materials – Part 504: Mechanical tests – Bending tests at low temperature for insulation and sheaths
Application of IEC Testing Equipment:
This test is intended for performing bending tests at low temperature on extruded insulations and sheaths.
Test sample of Cold Bend Test Apparatus:
For tests on the insulation, the test is intended for insulated conductors of circular cross-section having an external diameter up to and including 12,5 mm and for sector-shaped cores where it is not possible to prepare dumb-bells.
For tests on sheaths, the test is intended for cables with an overall diameter up to and including 12,5 mm; and for flat cables, with a major axis dimension up to and including 12,5 mm.
Matters need attention of IEC Test Equipment:
1.Ensure that the testing machine is kept at a low temperature during testing to avoid thermal effects on the material.
2.During the testing process, it is necessary to use the appropriate fixture and sample to ensure the accuracy and reliability of the test results.
3.During the test, you need to pay attention to the running status of the device and record the test data for subsequent analysis and evaluation.
Parameters of IEC Test Equipment:
Station:2
Diameter of samples:Φ2.5mm ～12.5mm
The number of turns:2 to 10 turns, and the number of turns shall be as specified in the following table:
| Overall diameter (d) of the test piece (mm) | Number of turns |
| D≤2.5 | 10 |
| 2.5﹤d≤4.5 | 6 |
| 4.5﹤d≤6.5 | 4 |
| 6.5﹤d≤8.5 | 3 |
| 8.5﹤d | 2 |
Test condition: The diameter of the mandrel shall be between 4 and 5 times the diameter of the test piece. Standard equip with the mandrel :Ф4,Ф5,Ф6,Ф7,Ф8,Ф10,Ф12,Ф14,Ф16,Ф18,Ф20,Ф24,Ф37.5mm
Rotation speed: 5S/ turn, manual control
Diameter of pipe: Ф3.5,Ф6,Ф10,Ф12,Ф16mm, each of two pieces
Picture for reference of IEC Test Equipment:
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!