Payment Terms | Western Union, MoneyGram, L/C, T/T |
Supply Ability | 10000PCS/MONTH as the specification |
Delivery Time | 5-15 days |
Packaging Details | Wooden cases |
Air Valve Body Material | Cast iron, ductile iron |
Air Valve Temperature | -20℃—120℃ |
Air Valve Flange Ends | DIN PN10.PN16, ANSI150,BS4504 |
Air Release Valve Size | DN50—DN200 |
Valve Pressure Class | PN1.0—1.6Mpa |
Air Release Valve Application | Fresh water, sewage, sea water, weak acid,weak base etc |
Brand Name | TongJiang |
Model Number | Air Release Valves |
Certification | ISO9001,BV,SGS |
Place of Origin | CHINA |
View Detail Information
Explore similar products
Female / Male Threaded Air Release Valve GGG50 Micro Exhaust Valve
GGG40 Sewage Air Release Valves , Composite Air Exhaust Valve PN 16 Bar
Automatic Air Release Valves PN 25 With Double Orifice And Integrated Valve
Cast Steel Flanged Air Release Valve , Double Ball Automatic Air Bleeder Valve
Product Specification
Payment Terms | Western Union, MoneyGram, L/C, T/T | Supply Ability | 10000PCS/MONTH as the specification |
Delivery Time | 5-15 days | Packaging Details | Wooden cases |
Air Valve Body Material | Cast iron, ductile iron | Air Valve Temperature | -20℃—120℃ |
Air Valve Flange Ends | DIN PN10.PN16, ANSI150,BS4504 | Air Release Valve Size | DN50—DN200 |
Valve Pressure Class | PN1.0—1.6Mpa | Air Release Valve Application | Fresh water, sewage, sea water, weak acid,weak base etc |
Brand Name | TongJiang | Model Number | Air Release Valves |
Certification | ISO9001,BV,SGS | Place of Origin | CHINA |
High Light | air relief valve ,air exhaust valve |
Ductile Air Release Valves ,Compound Exhaust Valve , ANSI 150 LB , HT200
PRODUCT INTRODUCTION
1. Description
CARX compound exhaust valve is used at the highest point of the pipeline or at the place where the air is closed. It expels the gas in the pipeline to dredge the pipeline and achieves normal work. If the exhaust valve is not installed, the liquid flowing in the pipeline generates dynamic heat which causes the gas to form a short circuit and makes the outlet capacity of the pipeline fall short of the requirement. Secondly, power cut and shutdown occur when the pipeline is running. Pump pipe will appear negative pressure, and will cause pipe vibration or rupture, exhaust (suction) valve on the rapid suction of air into the pipe, to prevent pipe vibration or rupture.
2. Principle of compound exhaust valve
When water is injected into the pipe, the plug stays in the open position and exhausts a lot. When the air is exhausted, the floating ball in the valve is floated, and the driving plug stops exhausting a lot. When the water in the pipe is conveyed normally, if a small amount of air gathers in the valve to a certain extent, the water level in the valve drops and the floating ball goes down. The air is discharged by small holes. When the pump stops, the water in the pipe is empty, or when there is negative pressure in the pipe, the plug opens and the air is sucked in to ensure the safety of the pipeline.
3. Structure and application of compound exhaust valve
The CARX compound exhaust valve is a barrel shaped valve body, which consists of stainless steel floating balls and plug heads.
CARX composite exhaust valve is installed at the outlet of Pump Po or in the water supply and distribution pipeline to remove a large amount of accumulated air from the pipeline, so as to improve the efficiency of the water pipe and pumping unit. In case of negative pressure in the pipeline, the valve can quickly suck in air to protect the pipeline from damage caused by negative pressure.
4. Technical parameters of compound exhaust valve
1. Medium: clear water.
2. Temperature: normal temperature
3. body: grey cast iron HT200
4. Floating ball and stopper: stainless steel
5. Sealing material: butadiene rubber
6. Body test pressure: 1.5MPa
7. Float ball, seal test pressure: 0.05-1.1MPA no leakage.
5. Air Release Valve Drawing and Datasheet
Model | DN(mm) | Size(mm) | ||||||
H | L | L1 | D | D1 | D2 | z-φd | ||
CARX-1.0 CARX-1.6 | 20 | 375 | 290 | 180 | 105 | 75 | 55 | 4-12 |
25 | 375 | 290 | 180 | 115 | 85 | 65 | 4-14 | |
50 | 480 | 360 | 205 | 160 | 125 | 100 | 4-14 | |
80 | 520 | 405 | 245 | 195 | 160 | 135 | 4-18 | |
100 | 530 | 405 | 245 | 215 | 180 | 155 | 4-18 |
6. Valve Packing with Plywood
Please feel free to contact with us at angela@tjfmcn.com or filling up an enquiry form instructed at the bottom.
You will get an effective response within 24 hours from TongJiang Team.
COMPANY PROFILE
floa
1. Our Factory
30 years experience of valve and pipeline industry.
10 senior technical engineers
20000 m2 production area
More than 100 employees to provide professional service.
As the reliable OEM for famous valve brand companies.
t ball valve
2. Factory Show
TONGJIANG Valve Technology Company was established for 30 years.
There are more than 100 employees which includes 10 professional engineers.
OUR SERVICE float ball valve
Reliable Quality, Competitive Price
Reply your inquiry in 2 hours with professional service.
Miss Angela
Mobile: +86 13588429004(Whatsapp)
Skype: angelazhuo1
E-mail: angela@tjfmcn.com
Tel No: +86 571 86991717
Official Website: www.zjtjvalve.com
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter
Year Established:
1993
Total Annual:
12000000-16000000
Employee Number:
60~100
Ecer Certification:
Active Member
TongJiang Holdings Company was established in 1993 and focuses on the research and development of all kinds of medium and low pressure valve and the groove pipe fittings.For this 26 years development, TongJiang Holdings has been the famous and professional valve production manufacture inChina. ... TongJiang Holdings Company was established in 1993 and focuses on the research and development of all kinds of medium and low pressure valve and the groove pipe fittings.For this 26 years development, TongJiang Holdings has been the famous and professional valve production manufacture inChina. ...
Get in touch with us
Leave a Message, we will call you back quickly!