Electric Oil Injected Rotary Screw Compressor / 25 Hp Screw Air Compressor

Product Specification

Electric Oil Injected Rotary Screw Compressor / 25 Hp Screw Air Compressor

OUR Service

Provides you with comprehensive and thoughtful service

No matter newly bought machines or old machines which have been used for dozens of years, knowledgeable experts in Wan Beardsley can solve all doubts for you. You can choose online communication or communicate with us on the phone, can enjoy face-to-face consultation with nearby Wan Beardsley franchised dealers, what our expert concern is to help you to make right choice but not for money. Only if you give us a call, you can experience our thoughtful service.

1. High quality of airend

• The rotor adopts advanced high-efficiency molded lines, which ensures stability and high-efficiency;
• It adopts two-stage independent compression, same pressure ratio, low speed design, thus enhancing more than 15% of air volume under the same power;
• Guarantee of low compression ratio at every state, smaller host engine leakage, higher volume efficiency;
• It adopts oil mist spray cooling at stage intervals, so as to make the entire compression process close to isothermal compression, thus improving the compression adiabatic efficiency;
• The two segment rotors are directly driven by bevel wheel, so that each rotor obtain the best line speed, and the compression transfer efficiency is the highest;
• The rotor and bearing have small load, the constant operation of host engine ensures long life;

2. Highly efficiency and energy-saving screw airend

The air end is connected with big rotator and is designed with low rotat-ing speed, and it contains two independent compression units. It is featured by high efficiency, low noise, low vibration, high reliability, low compression ratio in each stage, smaller leakage and high volume efficiency. Under the same power, two heads bear load while bearings bear small load with longer service life.

3. Highly efficient and energy-saving permanent magnetic motor

The airend is highly efficient and energy-saving permanent magnetic motor with protection level of IP55 which is elaborately selected according to requirement of application of air compressor, it reaches national grade-1 energy efficiency standard, both torque and load can meet special design standard so as to achieve optimization of motor efficiency and power factors under loading conditions. This optimized coefficient has about 5%-8% advantages when compared with efficiency of other motors.

4. Highly efficient and energy-saving filter system

Highly efficient oil-gas separator with special simplified design, aggregated separator core and oil return device, its service life is 6,000h. Oil filter is of low-pressure design with service life reaching as long as 4,OOOh, and high filtering precision protects bearing and screw rotator.

Air filter doesn’ t need to change air flow direction when doing filtering, instead, it directly runs through filtering medium, this reducing pressure loss, it is more energy-saving than traditional air filter with large filtering area, higher compactness and longer service life.

5. Highly efficient cooling system

It adopts highly efficient fin-type cooler with large heat exchange area, surplus of heat exchange being 30% and more optimal cooling effect, and it can normally operate under environmental temperature 45°C.

6. Energy-saving air inlet control system

New-type integrated inlet valve of professional design with large range of air inlet adjustment . It has valve regulation with small pressure loss, stable movement and long service life. Key part of inlet valve—magnetic valve uses internationally famous brand, which guarantees absolute operating safety and

7. Intelligent microcomputer control system

This system is of simple operation, it can realize Chinese/English and complex font switching with air filter/oil filter/oil fine separator/lubricating oil, it uses intelligent time monitoring and management, it even has remote monitoring function to be chosen by the user.

8. IOT PLC infinite extension module

Energy saving Mute environmental

1. The big data information-based management system

Master all kinds of information,use information,have a trial use of the information as well as find out the problems and breakdowns etc. at anywhere and anytime,and them provide the most valuable.timely and improrant information and finally improve various effciencies.

2. Save as much as 50% electricity

When the demand for air changes drainatically, the average energy saving rate is over 50%. There is no waster of idling and unloading, no peak start current, so that reduce the energy consumption of air compressor.

protection Subversion tradition Lead the future

• The extremely efficient and synchronic motors
• Its efficient turnning frequency with a broad range makes gaining much more energy-saving operation space possible.
• With the same power, in contrast with the air displacement produced by the single-stage compressors,an extra 15% of air displacement will be produced by the two-stage compressors.

Two-stage energy-saving screw compressor-technical parameters

Two-stage energy-saving screw compressor-technical parameters

Company profile:

            Wan Beardsley Compression Machine (Shanghai) Co., Ltd is a medium and large-sized enterprise specialized in research, development and production of air compressors. By virtue of fruitful technological strength and advanced and complete production and testing equipments, this company pursues enterprise tenet “Achieve high quality with conscientiousness and create a centennial brand with quality”, strictly performs the commitment “be the most energy-efficient screw air compressor”, continuously seeks for sustainable improvement of products, process and system, and increasingly improves product properties, quality and reliability so as to make out R & D and manufacturing capacity step onto a new stair in manufacturing technology of air compressor. Our product quality has reached internally first-class level, and some products have been exported to and supported Southeast Asia and European and American markets.