Customized Temperature Vacuum Brazing Furnace For Ceramic And Copper Parts

                                                           Vacuum brazing furnace

Vacuum brazing furnace for ceramic and copper parts connection period furnace Vacuum sintering brazing tempering

Product description:

Brazing in a vacuum furnace is a brazing process in which the workpiece after brazing is placed in a vacuum furnace. During the brazing process, the workpiece is in a vacuum state to avoid oxidation of the base metal, and under high-temperature vacuum conditions, the base material will volatilize at high temperature and be eliminated through the vacuum equipment system, and the residual brazing filler metal during the brazing process will also volatilize through the vacuum equipment. Brazing is performed in a vacuum furnace without adding brazing flux. The vacuum equipment consists of a mechanical vacuum pump, a diffusion pump, a vacuum connecting pipe, and a vacuum butterfly valve. It can improve the vacuum degree of the system and can have a positive effect on the quality of brazing. Generally, the vacuum degree of brazing in a vacuum furnace is within 1.33 * 10-1- 1.

Application:

Applicable to brazing stainless steel and high-temperature alloys with copper and nickel-based brazing fillers, especially suitable for high-temperature alloys containing titanium and aluminum. Copper, nickel, superalloys and silver-titanium alloys with silver brazing fillers, and cobalt alloys or titanium alloys with cobalt-based brazing fillers, etc.

Performance characteristics

 The main advantages of vacuum furnace brazing are high brazing quality, no oxidation of the workpiece, small deformation, and can braze other materials that cannot be brazed by other brazing methods. However, since the metal is easy to evaporate under vacuum, the brazing should be properly controlled, that is, the melting point of the brazing, the melting temperature, the penetration time of the substrate, and the penetration time. Therefore, it is not recommended to use brazing filler metals with high content of elements such as zinc, cadmium, manganese, magnesium, and phosphorus when brazing, and it is not appropriate to use workpieces containing a large amount of these elements in the substrate. Materials brazed in a vacuum furnace.

After sales:
1.Installation, Commissioning And Acceptance
We do installation, commissioning and acceptance in buyer's plant.During the installation and commissioning period, the commissioning personnel shall be provided free of charge by the demander according to the staff standard.
The equipment shipped to the buyer, the seller received the buyer's notification, both within a week to carry the equipment out of the box together, then check the equipment and all components according to the packing list . Including equipment accessories, spare parts and special tools, attached manual and technical documents, etc. It can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted according to the technical accessories.
2.Training
When taking-over the Furnace to the customer, We will give a staff training to customer. The operating personnel of the customer should join to commission,test the furnace, when installing at customer’s company.
This is practical operation training and practical maintenance training,and our technical personnel will telling the basic principle,equipment maintenance knowledge,And the common fault handling measures.We can training 2 ~ 3 workers. ( Training how to maintenance and operating.)
3. Warranty period
The warranty period of the equipment is 12 months, which starts from the date of installation and debugging of the supplier. Equipment failure happens, after-sales service personnel shall give solutions within 2 hours, after receiving the buyer's notification . If it is need to go to the site for treatment , operators dispatched by seller should arrive at the site within 48 hours after go aboard. In case of emergency,operators should arrive at the site within 48 hours after go aboard, and continue to make repairs until the fault is removed and the equipment returns to normal.