Shanghai Huitian New Material Co., Ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 10000KG MONTH |
| Packaging Details | 22kg/set: A: 20kg /bucket, B: 2kg/bucket. |
| Color COMPONENT A | BLACK |
| Color Component B | Translucent |
| Component of Basic Materials | Polysiloxane |
| Density of A Component | 1.16 |
| Density of B Component | 0.98 |
| Viscosity | 2200 |
| Mix Ratio by weight (A:B) | 10:1 |
| Handing Curing Time | 55 mins |
| Initial Curing Time | 3 hours |
| Tensile Strength | 0.6 mpa |
| Elongation at break | 160% |
| Hardness | Shore A 20 |
| Work Temperature | -60-200 |
| Brand Name | HUITIAN |
| Model Number | 4120Q |
| Certification | SGS |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
0119 Thermal Conductivity 6.2 W/ M·K Automotive Electronics LED Lighting Large
0117 4.0 W/M·K Silicone Thermally Conductive Compound Heat Transfer Medium For
0118 TC 5.0 W/M·K Heat Transfer Medium For Electronic Components LED Lighting
9503 One-Component Pre-Curing Type Thermal Gel High Power LED And Other
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 10000KG MONTH |
| Packaging Details | 22kg/set: A: 20kg /bucket, B: 2kg/bucket. | Color COMPONENT A | BLACK |
| Color Component B | Translucent | Component of Basic Materials | Polysiloxane |
| Density of A Component | 1.16 | Density of B Component | 0.98 |
| Viscosity | 2200 | Mix Ratio by weight (A:B) | 10:1 |
| Handing Curing Time | 55 mins | Initial Curing Time | 3 hours |
| Tensile Strength | 0.6 mpa | Elongation at break | 160% |
| Hardness | Shore A 20 | Work Temperature | -60-200 |
| Brand Name | HUITIAN | Model Number | 4120Q |
| Certification | SGS | Place of Origin | CHINA |
| High Light | thermal paste compound ，silicone thermal grease | ||
● INTRODUCTION
·4120Q, which is a condensed 2-part silicone sealant and can cure at room temperature, is suitable for molding intricate electronic parts as its low viscosity.
·Otherwise ,it is non-corrosive and suitable for adhering many substrates.
● FEATURES
·Suitable for molding intricate electronic parts because of its low viscosity.
·Excellent impact resistance because it forms an elastic silicone rubber after curing.
·Excellent heat resistance, damp resistance and freezing resistance.
·Non- corrosion to the substrate as it is dialcohol curing type.
·Excellent adhesion to many substrates without primer ,especially to PC and Epoxy.
● APPLICATIONS
·The fixation and the insulation of the electronic parts.
·Damp-resistance and water resistance for electronic parts and PCB boards.
·Potting of LED displays.
·Other general insulation molding.
● HOW TO USE
·Before mixing, part A should be stirred adequately in container ,and part B should be shaken well in container.
·Before application, you should confirm that its adhesion to
the substrate is well.
·Generally, the mixing ratio of part A and part B is 10 : 1.
If you want to change the curing conditions, a simple test is necessary before used .The curing time and pot life will be decreased while the amount of part B increasing.
·The extra bubble removal is not necessary when molding depth is less than 5 mm. Otherwise , it should be vacuumized at 10mmHg for at least 5 minutes to remove the bubbles. Otherwise, it will influence the surface appearance.
●TYPICAL PROPERTIES
As Supplied(25℃,65％RH)
Part
4120Q A
4120Q B
Color
Black
Translucent
Viscosity(cp)
1600
15
Specific Gravity
1.15
0.95
Properties after mixing(25℃,65％RH)
Mixing Ratio(weightratio) A:B = 10:1
Color Black
Mixture viscosity (cp) 1200
Pot life (min) 30
Curing time (h) 24
Cured 7 d,25℃,65％RH
Durometer Hardness, Shore A 0-5
Tear strength( Kgf/cm2 ) 0.7-0.8
Elongation at break( % ) 160-180
● PACKAGING
·Packing: A:20kg B:2kg
● USEABLE LIFE AND STORAGE
·When stored at 8-28℃ in the original unopened containers, this product has a usable life of 12 months from the date of production.
·Special precautions must be taken to prevent moisture from contacting Part B. Containers should be kept tighly close.
Company Details
Business Type:
Manufacturer,Importer,Exporter,Seller
Year Established:
1977
Total Annual:
580,000,000-620,000,000
Employee Number:
1800~2000
Ecer Certification：
Verified Supplier
Huitian New Material (stock code: 300041) is the oldest enterprise in China's adhesive & new material industry, with 46 years of development history, focusing on research and development, constantly breaking through the innovative technology of adhesive new material, taking the lead in solvi... Huitian New Material (stock code: 300041) is the oldest enterprise in China's adhesive & new material industry, with 46 years of development history, focusing on research and development, constantly breaking through the innovative technology of adhesive new material, taking the lead in solvi...
Get in touch with us
Leave a Message, we will call you back quickly!