Wearable Insulate Plastic Recycle Machine Smooth Surface Plastic Extruder PRE

Product Specification

Wearable Insulate Plastic Recycle Machine Smooth Surface Plastic Extruder PRE-255/300

Wearable Insulate Planetary Roller Extruder , Smooth Surface Plastic Extruder

Description:

1) The "PRE", a series of planetary roller extruders, experiences rolling and extrusion in configuration that a planetary screw is inter-engaged at a center of a main SCREW and BARREL which are screwed in a shape of helical gear 
2) The planetary screw revolves and rotates on its axis, in order to employ various resin 
3) The extruder is special and applied to various product and mass production 
4) In special, because the extruder supplies the rolling and extrusion through space of the inter-engagement, it may plasticize the resin at a low temperature 
5) Through the inter-meshing action of the toothed planetary roller system just one single revolution of the main spindle suffices to roll out the plastic melt as many as 1, 100 times, ensuring optimum plastification, homogenization and dispersion 
6) The "PRE" is a low-temperature forming extruder which may produce produces without any change of properties owing to its low-temperature forming and homogenizing 
7) Combined rolling and extruding action: Through the inter-meshing action of the toothed planetary roller system just one single revolution of the main spindle suffices to roll out the plastic melt as many as 1,100 times, ensuring optimum plastification, homogenization and dispersion 
8) Compared with other extruder designs, this system increases the contact surface of the melt by up to five times 
9) Low-cost formulation: The optimum heat-exchanging effect created by the large contact surfaces of the planetary roller system in conjunction with short residence time of the melt helps to achieve a considerable reduction in formulation costs. Costly stabilizers and lubricants are reduced to a minimum 
10) Self-cleaning feature: Since all toothed components of the machine constantly inter-mesh, no residual material is left in the machine when changing over from one formulation to another. The system is change-over from one color to another, results in no more than 5kg of scrap.

Applications:

Mainly used in the production of sheet, card, film and other plastic products industry.

Configuration:

A. PRE-255 PLANETARY ROLLER EXTRUDER    1SET 

(1). Planetary roller section: main screw 1 pc; planetary roller 12 pcs, knife

plate 1 pc, gear tooth sleeve; And this section is jacket-designed, which

can get through by heating oil; The main screw is core-drilled, heated by

oil; And the head of machine is cooled down by water;

(2). Section of material feeding, jacket-designed, water cooling.

(3). Feeding motor power: 3 KW;

(4). Hard-toothed gear box, Chinese famous brand;

(5). Inverter motor, AC, 185 KW;

(6). Stainless steel hopper, capacity of 200 kg;

(7). Metal detector( brand of S + S) is equipped on the top of the hopper;

(8). Rotating speed of main screw: 0 – 60 rpm, speed is adjustable;

B. SJ-300 SINGLE SCREW EXTRUDER    1SET  

(1). Barrel and screw material is 38CrMoAlA

surface is nitride treatment (HRC 68-72),

L/D: 6:1, rotating speed of the screw is 0 -75 rpm, adjustable speed;

Temperature control type: cast aluminum heater and fan cooling;

(2). Hard-toothed gear box, Chinese famous brand;

(3). AC inverter motor, 132KW;

(4). Head of the extruder is equipped with pressure/temperature indicator

Competitive Advantage:

1) Good performance

2) Long usage life

3) Good production stability

4) Reasonable design

5) High precision mold

6) Adopts AC frequency conversion technology

7) Uses imported electric components

8) Product characteristics:

a) Good foam

b) Smooth surface

c) Antibacterial

d) Wearable

e) Antistatic

f) Insulate

9) Widely used for agriculture and industry

10) Large marketing potential

Warranty and After sales service

Six months guarantee electrical parts, mechanism for 12 months; While the machine is broken during the production, the seller must give response to the problem at once.

Service:

1. Oversea installation guide.

2. Oversea test running

3. Ovsersea worker training

4. Technical support

5. Spare parts supply

6. Technical operation support

7. Formula and processing support

 Option

The material will be heating plastified and extrude by extruder. The granule which be cut out will be cooling by fan and put into bagsafter sifting

 commercial terms

1. Payment: 30% by T/T as advance payment, balance(70%) by T/T

  before shipment

2. Lead Time: 60 days after receiving the advance payment

3. Transportation: container, simple package ( PE film, salver)

4.Warranty period: From the day of the use of the machine in the buyer’s

  factory:

   (1) The mechanical Parts: 12 months

   (2) The electrical Parts: 6 months

5. Installations and Commissioning

  (1) Up to date commissioning has been made before shipment

  (2) Overseas Commissioning and charges

   one or two technicians will be sent to the buyer to guide the 

   installation and commissioning of the equipment if the customer

   requests.

   Customers pay the charge of our technicians.

   (1) Round-trip Airplane Ticket

   (2) Charges of transportation, accommodation and communication

   (3) The allowance for the technicians is USD 80 per day for one person.

   (4) An interpreter is needed.

6. Spare parts:

 Spare parts for one year are needed for the customers, and we suggest

 that customers should buy the spare parts. (Fittings list will be

 provided.)

7. English manual, Figuration drawing, and footing drawings are 

  provided.