220KW 100L Drop Door Banbury Internal Mixer For Artificial Leather And PVC Film

Product Specification

1. Introduction of Product

100L Drop Door Type Banbury Mixer For Artificial Leather And PVC Film

2. Description:

 1. Used for rubber mixing rubber.

 2. Intermeshing type of rotor.  

 3. Tangential type of rotor.

 4. High efficiency and quality. 
 5. Durability. 
 6. Easy maintenance. 
 7. Low consumption.

3. Equipment list

1  main body                                             1 group

2  press hammer and cylinder                  1 group 

3  material feeding device                        1 group   

4  discharge device                                  1 group

5  transmission device                              1 group         

6  electric control device                           1 group    

7  oil pressure and lubricate device          1 group   

8  tubing                                                   1 group

4. Applications: 

1.Different type of rotors can satisfy the mixing technical requirement.

2.Rotor chamber,discharge door and ram are circulation-cooled.with TCU, it can guarantee the quality of mixed rubber compound.

3.Touch surface of rotor,chamber,discharge door,ram and others contacting with mixing rubber is plated with chrome or wear-resistant hard metal.

4.Hydraulic type sealing structure gurrantees the closed grain of the adhesive meterials.

5.Upper ram is hydraulic or pneumatic pressure type, which can control the press continuously.

6.The floating weight is falling type, driven by gear and hydraulic oil tank with good sealing performance.

7.Various driving system matchs the customers’ requirement.

8.Control system is adopted with PLC system.

5. Main Technical Parameter:

6. Competitive Advantage:

1. PLC control system  
2. Lower noise,safer mixer 
3. Excellent dispersing effect

4. Best mixing chamber to get 100% mixing effect.

5. Fast mixing, good effectivity

6. Easier Maintenance.

7. Long life.

8. No leakage.

7.Service:

1. Oversea installation guide.

2. Oversea test running

3. Oversea worker training

4. Technical support

5. supply of spare parts

6. Technical operation support

7. Formula and processing support

8. Option

Two rotors mixer the relative rotation, the material from the feed mouth clamp into the roll gap by rotor extruding and shearing, after() through the roll gap above the top tied pien is divided into two parts, respectively along the chamber wall and the gap between the rotor before and after the return to roll gap above.In a week around the rotor flow, material is influenced by the shear and friction action, make rubber temperature rise sharply, lower viscosity, increased the wettability on the surface of the rubber in the compound, make good contact with rubber and compound surface.

9. Commercial Terms

1. Delivery period: totally 6 months after the contact is confirmed.

2. Payment: 30% of the total amount by T/T in advance as down payment, 70% of total amount by T/T before shipment.

3. Spare parts: The seller will provide a set of valueless vulnerable parts for free. The seller also suggests the buyer to buy a set of spare parts which meets one year’s use again. The seller will show the list of spare parts to the buyer for his choose before delivery.

4. Appearance and color: appearance and color of the machines are based on the seller’s standard. Of  course, we can also custom-made according to buyer’s request.

5. Electric power: The quotation above is based on 380V/50Hz. There will be some additional fee and extended producing time for custom-built electric power requirement.

6. Warranty period:

    6-1. Machines: one year after successful debugging;

    6-2. Electrical components: 6 months after successful debugging.

7. Debugging service and cost borne by Foreign:

    7-1. The seller will send three or four technical workers (or more as buyer’s request) to the place which appointed by the buyer for the guidance of equipment installation and the debugging service;

    7-2. Both buyer and seller should bear their corresponding charge as below:

    7-2-1. The seller is in charge of the fee cost in China but except for the visa charge;

    7-2-2. The buyer is in charge of the fee cost in Foreign and the visa charge. This fee includes but not limited to the followings:

    a. Round-trip ticket;

    b. Transportation, meals, accommodation and communication fee during business trip;

    c. Allowance (manpower fee) USD 80.00 for per person a day (days calculation: total days from the day on the business trip to returning to China);

    d. Translator: The buyer should hire a translator for the seller's technical workers convenient field work communication, and for completing the task successfully. Otherwise the seller will send an additional translator. The buyer should be in charge of this cost (refer to a~d).