Occlusal Pattern Dispersion Kneader Mixer For Rubber 26 - 45kg / unit 55KW - 6P

Product Specification

1. Introduction of Product
26-45kg/unit 55KW-6P Occlusal Pattern NL-35L Dispersion Kneader For Rubber

 
 
2. Description:
Rubber&plastic industry, such as TPR, EVA, Rubber sole, Rubber Roller, Hoses Belts, Sponges, Vibration Insulator, Elastic Cord, Sealing Materials, Tire, Tapes, Master Batches, Pigment Ink, Automboile Electric Rubber Parts, Chemical Industry Compounds, etc.
  
3. Equipment list

• Main body                                   one
• Pressure device                         one
• Discharging device                     one
• Rigging device                            one
• Matched pipe                              one
• Electric control                           one 

 
 
4. Applications:  

   It is widely used to mix the rubber, plastics and other rubber & plastics material.

5. Main Technical Parameter:

6. Competitive Advantage:

• An automatic temperature and time control system to provide a 100% mixing effect.
• Easy to clean chamber and chamber and changing colors.
• In 6-10 minutes/batch of output equivalent to 2 units of mixing mill.
• Pressurized and sealed mixing chamber to provide high mixing performance and prevented environmental pollution.

 
7. Service:
 
1. Oversea installation guide.
2. Oversea test running
3. Oversea worker training
4. Technical support
5. supply of spare parts
6. Technical operation support
7. Formula and processing support
 
8. Option
Two rotors mixer the relative rotation, the material from the feed mouth clamp into the roll gap by rotor extruding and shearing, after through the roll gap above the top tied pien is divided into two parts, respectively along the chamber wall and the gap between the rotor before and after the return to roll gap above.In a week around the rotor flow, material is influenced by the shear and friction action, make rubber temperature rise sharply, lower viscosity, increased the wettability on the surface of the rubber in the compound, make good contact with rubber and compound surface.
 
9. commercial terms
1. Payment: 30% by T/T as advance payment, balance(70%) by T/T before shipment
2. Lead Time: 60 days after receiving the advance payment
3. Transportation: container, simple package ( PE film, salver)
4.Warranty period: From the day of the use of the machine in the buyer’s factory:
   (1) The mechanical Parts: 12 months
   (2) The electrical Parts: 6 months
5. Installations and Commissioning
   (1) Commissioning will have been made before shipment
   (2) Overseas Commissioning and charges
   one or two technicians will be sent to the buyer to guide the installation and commissioning of the              equipment if the customer requests.
   Customers need topay the charge of our technicians.
   (1) Round-trip Airplane Ticket
   (2) Charges of transportation, accommodation and communication
   (3) The allowance for the technicians is USD 80 per day for one person.
   (4) An interpreter is needed.
6. Spare parts:
    Spare parts for one year are needed for the customers, and we suggest that customers should buy the     spare parts. (Fittings list will be provided.)
7. English manual, Figuration drawing and footing drawings are provided.