Guangzhou Yuanxing Industrial Co., Ltd.
| Payment Terms | T/T, Western Union,paypal |
| Supply Ability | 99 |
| Delivery Time | 5-8 work day |
| Packaging Details | 45*45*45cm |
| Product Name | GT4 & BELFE Motor |
| Position | 4 Pot/1 pot |
| Fit wheel size | 17/18/19/20/21/22 inch |
| Calipers Color | Matte Gray |
| Caliper Material | Aluminum |
| Pads Material | Carbon Metal |
| Pads Heat Resistance | 600°C |
| Application | Auto Part |
| Brand Name | Jekit |
| Model Number | GT4&BELFE |
| Place of Origin | china |
View Detail Information
Explore similar products
6061 Aluminum 4 Pots Brake System Dual Rear Caliper 355x28mm Brake Disc
Electric Machinery Aluminum Caliper Disc Brake For 18in Rear Rim Wheel
Two Pot Machinery GT4 Electric Dual Rear Caliper 28mm Aluminum Alloy
Jekit Dual Piston Caliper 355*28mm Rotor Aluminum Brake Caliper
Product Specification
| Payment Terms | T/T, Western Union,paypal | Supply Ability | 99 |
| Delivery Time | 5-8 work day | Packaging Details | 45*45*45cm |
| Product Name | GT4 & BELFE Motor | Position | 4 Pot/1 pot |
| Fit wheel size | 17/18/19/20/21/22 inch | Calipers Color | Matte Gray |
| Caliper Material | Aluminum | Pads Material | Carbon Metal |
| Pads Heat Resistance | 600°C | Application | Auto Part |
| Brand Name | Jekit | Model Number | GT4&BELFE |
| Place of Origin | china | ||
| High Light | Car Brake System Dual Rear Caliper ，GT4 Dual Rear Caliper ，Toyota Wilfa Dual Rear Caliper | ||
Jekit Car Brake System Dual Caliper GT4 BELFE For Toyota Wilfa
BELFE Motor Operation Guide
The parking brake usually refers to the manual brake installed on the motor vehicle, referred to as the handbrake, which is used to stabilize the vehicle after the vehicle is stopped and avoid accidents caused by slipping when the vehicle is parked on a slope road. The common handbrake is generally placed in the drooping position of the driver's right hand, which is easy to use. Some automatic transmission models on the market are equipped with a foot brake with the same function as the handbrake on the outside of the driver's left foot, and some advanced models are also equipped with an electronic parking brake system.
To apply the parking brake, press down on the brake pedal and pull the parking brake lever all the way up. To release the parking brake, press down on the brake pedal, pull the parking brake lever up slightly, press the button on the handle end with your thumb, and lower the parking brake lever to its original position.
For cars equipped with automatic transmissions, be sure to apply the parking brake before moving the gear lever to the "P" (park) position. When parking on an incline, if you shift into the "P" position before applying the parking brake, the weight of the body will make it difficult to shift out of the "P" (park) gear when you are ready to start the car.
When preparing to start the vehicle, the gear lever should be shifted out of the "P" (park) position before releasing the parking brake.
Do not tighten the parking brake when driving the car, otherwise the rear brake will be reduced due to overheating, the brake life will be shortened or permanent brake damage will occur.
If the parking brake does not hold the car stably, or does not release completely, ask your dealer or service station to have it checked immediately. Always apply the parking brake fully before leaving the car, otherwise the car will move and cause injury or damage. When parked, make sure the shift lever is in neutral for manual transmission vehicles: leave the shift lever in the "P" (Park) or "N" (Neutral) position for automatic transmission vehicles, and most automatic transmissions The car ignition key can only be pulled out when the car is only in P gear. Unless there are special circumstances, it is strictly forbidden to park the car transmission in the forward gear (D, S, L or with Arabic numerals, etc.) or reverse gear (R) position.
When parking in extremely cold climates, the following procedures should be followed:
(1) Apply the parking brake.
(2) Put the shift lever of a manual transmission vehicle in the 1st gear or "R" (reverse gear) position; make the shift lever of an automatic transmission vehicle in the "P" (parking gear) position.
(3) Turn off the engine, get off the car, and put a plug under the wheel.
(4) Release the parking brake.
When you return to the park, you must remember to apply the parking brake first, then remove the plug
Product Form
| Item name | rear dual caliper |
| Color | Matte Gray |
| Fit for | rear car brake |
| Quality | 100% Tested |
| Full set included | 1 set GT4 brake kit /1 pair BELFE caliper & pads |
reference picture
Company Details
Business Type:
Manufacturer,Trading Company,Seller
Year Established:
2017
Total Annual:
1000000-5000000
Employee Number:
50~100
Ecer Certification：
Active Member
Guangzhou Yuanxing Industrial Co.Ltd was established in 2017 and is located in Room 302, building 5, No. 7, Laowu street, Dongping village, Yongping street, Baiyun District, Guangzhou ,China. The location is very excellent and the transportation is convenient. We have very rich industry experience a... Guangzhou Yuanxing Industrial Co.Ltd was established in 2017 and is located in Room 302, building 5, No. 7, Laowu street, Dongping village, Yongping street, Baiyun District, Guangzhou ,China. The location is very excellent and the transportation is convenient. We have very rich industry experience a...
Get in touch with us
Leave a Message, we will call you back quickly!